Date   

Re: Afedri AFE822X dual channel Diversity/phasing support?

Simon Brown
 

Hi,

Unlikely. As this is a minority interest and is covered by HDSDR then I'm tempted to leave it for now. Were there a four (or more) channel SDR then I would look at this, but certainly for the rest of 2022 I'm working on other areas of SDR.

Sorry - taking it a bit easier this year...

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of daiche via groups.io <daiche@...>
Sent: 18 June 2022 02:46
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: [SDR-Radio] Afedri AFE822X dual channel Diversity/phasing support?
 
Simon,

Will there ever be dual channel support for the Afedri SDR's to enable phasing? Or support for the Afedri SDR Network Control Box, that works with HDSDR, to do same?

Regards,

Dave Aichelman     N7NZH     Grants Pass, Oregon

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Afedri AFE822X dual channel Diversity/phasing support?

daiche
 

Simon,

Will there ever be dual channel support for the Afedri SDR's to enable phasing? Or support for the Afedri SDR Network Control Box, that works with HDSDR, to do same?

Regards,

Dave Aichelman     N7NZH     Grants Pass, Oregon


Re: Main Receiver DSP Docking to the RHS

jdow
 

The only think I can think of is you're trying to dock it on the matrix window or one of the other windows that can come up. That may not work unless Simon found some magic.

{^_^}

On 20220616 03:18:25, Nicholas Shaxted wrote:

I tried that. I move the DSP window according and it remains floating. I select “docking” and it flies back to where I started.

I’m still in the school of thinking I am doing something wrong.

 

I’m in the middle of mounting my 3.4GHz feed and pre-amp on the dish and as there are no drag and drop Windows features I need to measure twice, tighten and measure again….and eventually start again. A spotting laser helps no end.

 

I’ll return to the Windows receiver issues next week once I am done fitting the hardware to the mast

 

Thanks all.

 

 

Nick – g4ogi

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow via groups.io
Sent: 16 June 2022 11:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

Did you see my post with the pictures? (Or did they not make it?)

This is a very standard Windows GUI metaphor. It's best to learn how to do it.

{o..o}

On 20220616 02:17:45, Nicholas Shaxted wrote:

Thanks Max,

I have tried all of that and am left with a floating panel.

As soon as I click to dock it the panel flies back to the RHS and docks.

 

For now I will leave it as it is as I don’t have time/can’t be bothered at this stage chasing the issue down

[I am trying to build some microwave kit for 3400Mhz, as well as manage the builders who making modifications to the house..]

 

Nick – g4ogi

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Max via groups.io
Sent: 16 June 2022 09:27
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

On Wed, Jun 15, 2022 at 11:30 AM, Nicholas Shaxted wrote:

If anyone is interested I have yet to resolve the issue.

 

nick

Nick

I assume you have read this about positioning panels/windows?

https://www.sdr-radio.com/LayoutPanes

I don't often need to use a Receiver pane as the main waterfall window serves my purpose, but to try and simulate your issue I did enable one RX Pane. Note that when you "left click and drag" the title bar of a pane, not only do you see the large "arrows diamond" cross graphic near the centre of the SDRC window to drop the pane onto in the required arrow position, if you look right at the edges of the screen you will see there are arrows there too. It's sometimes possible to end up with the RX pane all across the bottom of the screen and this can give the impression that it's overlapping the DSP (actually it's not). So either click/drag the DSP title bar to the arrow on to the far left of the screen to make it full height, or click/drag the title bar of the RX window to the bottom of the centre large crosses to place it where I think you want it, i.e. centre bottom.

Anyway, have a read of that section I linked if you did not already. Other than this I'm finding it hard to visualise the exact issue you are having but I find SDRC pane positioning entirely predictable on my setup.

Just to recap, if you left-click (and hold) and drag the title bar of any SDRC pane and place it over one of the large on-screen arrows, then that pane automatically switches to "docked" mode in the required position. If you don't release over one of the big on-screen arrows, then that pane then becomes floating.

Hope it helps?

Max


Re: Main Receiver DSP Docking to the RHS

Nicholas Shaxted
 

I tried that. I move the DSP window according and it remains floating. I select “docking” and it flies back to where I started.

I’m still in the school of thinking I am doing something wrong.

 

I’m in the middle of mounting my 3.4GHz feed and pre-amp on the dish and as there are no drag and drop Windows features I need to measure twice, tighten and measure again….and eventually start again. A spotting laser helps no end.

 

I’ll return to the Windows receiver issues next week once I am done fitting the hardware to the mast

 

Thanks all.

 

 

Nick – g4ogi

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow via groups.io
Sent: 16 June 2022 11:02
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

Did you see my post with the pictures? (Or did they not make it?)

This is a very standard Windows GUI metaphor. It's best to learn how to do it.

{o..o}

On 20220616 02:17:45, Nicholas Shaxted wrote:

Thanks Max,

I have tried all of that and am left with a floating panel.

As soon as I click to dock it the panel flies back to the RHS and docks.

 

For now I will leave it as it is as I don’t have time/can’t be bothered at this stage chasing the issue down

[I am trying to build some microwave kit for 3400Mhz, as well as manage the builders who making modifications to the house..]

 

Nick – g4ogi

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Max via groups.io
Sent: 16 June 2022 09:27
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

On Wed, Jun 15, 2022 at 11:30 AM, Nicholas Shaxted wrote:

If anyone is interested I have yet to resolve the issue.

 

nick

Nick

I assume you have read this about positioning panels/windows?

https://www.sdr-radio.com/LayoutPanes

I don't often need to use a Receiver pane as the main waterfall window serves my purpose, but to try and simulate your issue I did enable one RX Pane. Note that when you "left click and drag" the title bar of a pane, not only do you see the large "arrows diamond" cross graphic near the centre of the SDRC window to drop the pane onto in the required arrow position, if you look right at the edges of the screen you will see there are arrows there too. It's sometimes possible to end up with the RX pane all across the bottom of the screen and this can give the impression that it's overlapping the DSP (actually it's not). So either click/drag the DSP title bar to the arrow on to the far left of the screen to make it full height, or click/drag the title bar of the RX window to the bottom of the centre large crosses to place it where I think you want it, i.e. centre bottom.

Anyway, have a read of that section I linked if you did not already. Other than this I'm finding it hard to visualise the exact issue you are having but I find SDRC pane positioning entirely predictable on my setup.

Just to recap, if you left-click (and hold) and drag the title bar of any SDRC pane and place it over one of the large on-screen arrows, then that pane automatically switches to "docked" mode in the required position. If you don't release over one of the big on-screen arrows, then that pane then becomes floating.

Hope it helps?

Max


Re: Main Receiver DSP Docking to the RHS

jdow
 

Did you see my post with the pictures? (Or did they not make it?)

This is a very standard Windows GUI metaphor. It's best to learn how to do it.

{o..o}

On 20220616 02:17:45, Nicholas Shaxted wrote:

Thanks Max,

I have tried all of that and am left with a floating panel.

As soon as I click to dock it the panel flies back to the RHS and docks.

 

For now I will leave it as it is as I don’t have time/can’t be bothered at this stage chasing the issue down

[I am trying to build some microwave kit for 3400Mhz, as well as manage the builders who making modifications to the house..]

 

Nick – g4ogi

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Max via groups.io
Sent: 16 June 2022 09:27
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

On Wed, Jun 15, 2022 at 11:30 AM, Nicholas Shaxted wrote:

If anyone is interested I have yet to resolve the issue.

 

nick

Nick

I assume you have read this about positioning panels/windows?

https://www.sdr-radio.com/LayoutPanes

I don't often need to use a Receiver pane as the main waterfall window serves my purpose, but to try and simulate your issue I did enable one RX Pane. Note that when you "left click and drag" the title bar of a pane, not only do you see the large "arrows diamond" cross graphic near the centre of the SDRC window to drop the pane onto in the required arrow position, if you look right at the edges of the screen you will see there are arrows there too. It's sometimes possible to end up with the RX pane all across the bottom of the screen and this can give the impression that it's overlapping the DSP (actually it's not). So either click/drag the DSP title bar to the arrow on to the far left of the screen to make it full height, or click/drag the title bar of the RX window to the bottom of the centre large crosses to place it where I think you want it, i.e. centre bottom.

Anyway, have a read of that section I linked if you did not already. Other than this I'm finding it hard to visualise the exact issue you are having but I find SDRC pane positioning entirely predictable on my setup.

Just to recap, if you left-click (and hold) and drag the title bar of any SDRC pane and place it over one of the large on-screen arrows, then that pane automatically switches to "docked" mode in the required position. If you don't release over one of the big on-screen arrows, then that pane then becomes floating.

Hope it helps?

Max


Re: Main Receiver DSP Docking to the RHS

Nicholas Shaxted
 

Thanks Max,

I have tried all of that and am left with a floating panel.

As soon as I click to dock it the panel flies back to the RHS and docks.

 

For now I will leave it as it is as I don’t have time/can’t be bothered at this stage chasing the issue down

[I am trying to build some microwave kit for 3400Mhz, as well as manage the builders who making modifications to the house..]

 

Nick – g4ogi

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Max via groups.io
Sent: 16 June 2022 09:27
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

On Wed, Jun 15, 2022 at 11:30 AM, Nicholas Shaxted wrote:

If anyone is interested I have yet to resolve the issue.

 

nick

Nick

I assume you have read this about positioning panels/windows?

https://www.sdr-radio.com/LayoutPanes

I don't often need to use a Receiver pane as the main waterfall window serves my purpose, but to try and simulate your issue I did enable one RX Pane. Note that when you "left click and drag" the title bar of a pane, not only do you see the large "arrows diamond" cross graphic near the centre of the SDRC window to drop the pane onto in the required arrow position, if you look right at the edges of the screen you will see there are arrows there too. It's sometimes possible to end up with the RX pane all across the bottom of the screen and this can give the impression that it's overlapping the DSP (actually it's not). So either click/drag the DSP title bar to the arrow on to the far left of the screen to make it full height, or click/drag the title bar of the RX window to the bottom of the centre large crosses to place it where I think you want it, i.e. centre bottom.

Anyway, have a read of that section I linked if you did not already. Other than this I'm finding it hard to visualise the exact issue you are having but I find SDRC pane positioning entirely predictable on my setup.

Just to recap, if you left-click (and hold) and drag the title bar of any SDRC pane and place it over one of the large on-screen arrows, then that pane automatically switches to "docked" mode in the required position. If you don't release over one of the big on-screen arrows, then that pane then becomes floating.

Hope it helps?

Max


Re: Main Receiver DSP Docking to the RHS

Max
 

On Wed, Jun 15, 2022 at 11:30 AM, Nicholas Shaxted wrote:

If anyone is interested I have yet to resolve the issue.

 

nick

Nick

I assume you have read this about positioning panels/windows?

https://www.sdr-radio.com/LayoutPanes

I don't often need to use a Receiver pane as the main waterfall window serves my purpose, but to try and simulate your issue I did enable one RX Pane. Note that when you "left click and drag" the title bar of a pane, not only do you see the large "arrows diamond" cross graphic near the centre of the SDRC window to drop the pane onto in the required arrow position, if you look right at the edges of the screen you will see there are arrows there too. It's sometimes possible to end up with the RX pane all across the bottom of the screen and this can give the impression that it's overlapping the DSP (actually it's not). So either click/drag the DSP title bar to the arrow on to the far left of the screen to make it full height, or click/drag the title bar of the RX window to the bottom of the centre large crosses to place it where I think you want it, i.e. centre bottom.

Anyway, have a read of that section I linked if you did not already. Other than this I'm finding it hard to visualise the exact issue you are having but I find SDRC pane positioning entirely predictable on my setup.

Just to recap, if you left-click (and hold) and drag the title bar of any SDRC pane and place it over one of the large on-screen arrows, then that pane automatically switches to "docked" mode in the required position. If you don't release over one of the big on-screen arrows, then that pane then becomes floating.

Hope it helps?

Max


Re: Main Receiver DSP Docking to the RHS

Simon Brown
 

Alan,

Already set. Lots of files in the group archive, I probably have to zonk a lot of these.

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Alan G4ZFQ via groups.io <alan4alan@...>
Sent: 15 June 2022 12:27
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS
 
On 15/06/2022 10:30, Nicholas Shaxted wrote:
> If anyone is interested I have yet to resolve the issue.

nick

If that refers to attachments then Admin - Settings - Message Policies
has the option to delete old attachments when storage is full.


Alan






--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Main Receiver DSP Docking to the RHS

Alan G4ZFQ
 

On 15/06/2022 10:30, Nicholas Shaxted wrote:
If anyone is interested I have yet to resolve the issue.
nick

If that refers to attachments then Admin - Settings - Message Policies has the option to delete old attachments when storage is full.


Alan


Re: Main Receiver DSP Docking to the RHS

Nicholas Shaxted
 

If anyone is interested I have yet to resolve the issue.

 

nick

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 15 June 2022 10:39
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

Will check a bit later this morning. I expect we've run out of storage so need someone to throw stuff away...


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of G3TDJ via groups.io <g3tdj@...>
Sent: 15 June 2022 10:38
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

Same here Max...not seeing attachments for this group using the web interface.
Checked other groups, including SDR-Radio-Test-Team, and attachments are displayed





--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Main Receiver DSP Docking to the RHS

Simon Brown
 

Will check a bit later this morning. I expect we've run out of storage so need someone to throw stuff away...

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of G3TDJ via groups.io <g3tdj@...>
Sent: 15 June 2022 10:38
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS
 
Same here Max...not seeing attachments for this group using the web interface.
Checked other groups, including SDR-Radio-Test-Team, and attachments are displayed






--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Main Receiver DSP Docking to the RHS

G3TDJ
 

Same here Max...not seeing attachments for this group using the web interface.
Checked other groups, including SDR-Radio-Test-Team, and attachments are displayed


Re: Main Receiver DSP Docking to the RHS

Max
 

Sorry to raise it again, but anyone else got the problem of not seeing attachments when using the Group web interface?

I don't see any of the pictures attached in this thread!

Max


Re: Console with Elad S2 not working

George Stein - NJ3H
 

Hello Simon,

The device manager does list the Elad as shown in your picture.  Thanks!

I did a restart of the computer and all seems OK now.

I am attaching the logfile for you to look at when you have time to see if something looks strange with it.

Regards,
George


Re: Console with Elad S2 not working

Simon Brown
 

And,



From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 14 June 2022 19:29
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Also,

Power cycle the S2. I've seen the same with the S3. FWIW I use 64-bits, the native software 32-bits. The logfile may show something...

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 14 June 2022 19:04
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Hi,

Show me the logfile.

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of George Stein - NJ3H via groups.io <nj3h@...>
Sent: 14 June 2022 18:21
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Hi Simon and others, 

Any additional suggestions to resolve this problem. I love SD Console with the Elad so I am very anxious to get it working again.

Can someone check and see if their Elad S2 shows up in device manager?  If it is supposed to be there, how do I get it back? 

Thanks, 

George 

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Console with Elad S2 not working

Simon Brown
 

Also,

Power cycle the S2. I've seen the same with the S3. FWIW I use 64-bits, the native software 32-bits. The logfile may show something...

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 14 June 2022 19:04
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Hi,

Show me the logfile.

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of George Stein - NJ3H via groups.io <nj3h@...>
Sent: 14 June 2022 18:21
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Hi Simon and others, 

Any additional suggestions to resolve this problem. I love SD Console with the Elad so I am very anxious to get it working again.

Can someone check and see if their Elad S2 shows up in device manager?  If it is supposed to be there, how do I get it back? 

Thanks, 

George 

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Console with Elad S2 not working

Simon Brown
 

Hi,

Show me the logfile.

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of George Stein - NJ3H via groups.io <nj3h@...>
Sent: 14 June 2022 18:21
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Hi Simon and others, 

Any additional suggestions to resolve this problem. I love SD Console with the Elad so I am very anxious to get it working again.

Can someone check and see if their Elad S2 shows up in device manager?  If it is supposed to be there, how do I get it back? 

Thanks, 

George 

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Console with Elad S2 not working

Don Woodward - KD4APP
 

Have you tried multiple bands?  On my Pluto+ after I upgraded the firmware it went back to the default frequency range and I was getting no audio on VHF - checking a UHF station and it worked - in my case I had to set the chip type to get full range.

Don W.
KD4APP

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of George Stein - NJ3H via groups.io <nj3h@...>
Sent: Tuesday, June 14, 2022 1:21 PM
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Console with Elad S2 not working
 
Hi Simon and others, 

Any additional suggestions to resolve this problem. I love SD Console with the Elad so I am very anxious to get it working again.

Can someone check and see if their Elad S2 shows up in device manager?  If it is supposed to be there, how do I get it back? 

Thanks, 

George 


Re: Console with Elad S2 not working

George Stein - NJ3H
 

Hi Simon and others, 

Any additional suggestions to resolve this problem. I love SD Console with the Elad so I am very anxious to get it working again.

Can someone check and see if their Elad S2 shows up in device manager?  If it is supposed to be there, how do I get it back? 

Thanks, 

George 


Re: Main Receiver DSP Docking to the RHS

jdow
 

Resizing is left as an exercise for the student. This us a very standard Windows GUI metaphor.

{^_^}

On 20220614 03:26:29, jdow wrote:

Three helpful pictures are attached. They show how it works.

{^_^}

On 20220614 01:26:26, Nicholas Shaxted wrote:

Thanks Gisle, but that is what I tried and it doesn’t work here.

When I drag the DSP window to where I want it and all the arrowed windows appear it allows me to drop it in the correct place, but the whole receive window does not shift and the DSP just sits atop the left-hand edge of the rx window.

The problem is that the DSP has become a floating window (again) and when asking it (very nicely) to become a docked window it pops back over to the right-hand side.

 

 

No matter what I do it seems only to want to dock only to the right-hand side.

It didn’t think it was a bug but merely a simple user error made by a simple user.

 

FWIW The mouse is setup for use left-handed.

 

Nick - g4ogi

For other amusement I have written PTO on both sides at the bottom of a blank piece of A4 paper.

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gisle Vanem via groups.io
Sent: 14 June 2022 08:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Main Receiver DSP Docking to the RHS

 

Just click and drag the windows from the right to the left.

Mind you, it's a docking window, so it won't dock were you want until the dark-blue hint-area shows up.



Floating after releasing LMB.jpg Floating with correct highlighted hint.jpg


Floating with hint.jpg