|
Re: Server Issues? I have not been able to log on to any remotes?
Timeout after 2 seconds is due to a Firewall blocking traffic either in the router or on the computer hosting the server. Don’t forget antivirus software will have firewalls as does Windows.
The Router needs to have a port open and forwarding to the hosting computer, which will have to have a fixed IP not automatically assigned. 73 Kriss KA1GJU |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
k6msm@...
LAN server works. The audio is fine at home, but it's not connecting to SDRSpace per the following. If I ping the host it doesn't reply.
2018-09-13 07:42:41, OnAir> On-Air Data ............: 00-4F-54-54-49-44...
2018-09-13 07:42:41, OnAir> On-Air Size (bytes) ....: 716
2018-09-13 07:42:41, OnAir> On-Air Compress flags ..: 1
2018-09-13 07:42:41, OnAir> On-Air Compressed ......: 6
2018-09-13 07:42:41, OnAir> On-Air Update index ....: 2642
2018-09-13 07:42:41, OnAir> On-Air Sent 18 bytes to status.sdrspace.com:50199
2018-09-13 07:42:41, OnAir> On-Air Reply = Timeout after 2 seconds
|
|
|
|
Re: Simon's World Map
Michael Sterba
Hello Simon,
I have been a quite user and must say that this is actually a really cool item. I'm finding it useful for my daily radio related activities. Thank you for sharing this effort. Michael - KG7HQ |
|
|
|
Re: Digital decoder
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of David - G4PNX via Groups.Io
Simon, Your software goes from strength to strength...this decoder is triffic. |
|
|
|
Re: Digital decoder
David - G4PNX <david.painter@...>
Simon, Your software goes from strength to strength...this decoder is triffic.
David - G4PNX |
|
|
|
Digital decoder
Andrew OBrien <k3ukandy@...>
Simon, you have outdone even your usual high standards. The digital decoder is a work of art ! Andy K3UK |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
k6msm@...
Well, riddle me this. The NFM audio on this other station (KJ4SPG) was the same, low and distorted, but the audio-only recording provided clear, good audio. And here's a screen cap showing it's not a poor signal issue and I confirmed it wasn't a local station as the recording proved it certainly wasn't from the Los Angeles area.
Must be something on my work install. Do I need to install the driver of the remote SDR or something? I will try more at home. Mike K6MSM |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
k6msm@...
Roger, but I tried another server that does have a VHF/UHF antenna and the signals are strong and clean, but the FM audio is weak and garbled. SSB audio was ok on yours on HF.
I'm trying to set up my own station, but seem to be stuck in the firewall as I can't get in and it doesn't appear on SDRSpace. I'll try on the LAN when I get home to make sure that works first. Mike K6MSM |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of k6msm@...
I only just discovered this today, so I apologize. |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
k6msm@...
I only just discovered this today, so I apologize.
On FM, I only get a very low crackling sound over the server, even in the presence of strong ham FM signals. Maybe I should try setting up my own to test. |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Rick Fenlon
Email Sent Simon - Thank You.
|
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of k6msm@...
How do I close my sessions properly? I'm not on any, but it says "maximum sessions is 2 for each IP address," but I have no sessions right now. |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
k6msm@...
How do I close my sessions properly? I'm not on any, but it says "maximum sessions is 2 for each IP address," but I have no sessions right now.
Thanks, Mike K6MSM |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Rick Fenlon
OK One Moment.
|
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Hi,
I must get back to this stupid bug. Crazy…
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Rick Fenlon via Groups.Io
My apologies Simon but which log file, not quite sure what you need. Again my apologies. |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Rick Fenlon
My apologies Simon but which log file, not quite sure what you need. Again my apologies.
|
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Odd.
I see the Bias-T is on (best switch it off) – but this is odd, please show me the logfile. I think a change I made today has resulted in the server being unstable, must look at this now.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Rick Fenlon via Groups.Io
OK Basic Screen Shot |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Rick Fenlon
Log Data: Thanks for your help.
14:37:57.103: Starting
14:37:57.103: Product .....: SDR Console version 3.0.2 build 1234
14:37:57.103: Copyright ...: Copyright (C) 2018 by SDR-Radio.com Limited
14:37:57.103: Build date ..: Aug 13 2018, 15:26:57
14:37:57.197: Favourites: Loading C:\Users\rfenl\AppData\Roaming\SDR-RADIO.com (V3)\Console\Ident0\SDR-Favourites_000.xml
14:37:57.197: Favourites: Loaded 56
14:37:57.197: Setting priority to Above Normal
14:37:58.088: Execution state = Continuous
Intel IPP
---------
Target CPU: l9
Name: ippSP AVX2 (l9)
Version: 8.0.1 (r40318)
Build date: Jul 11 2013
-
Logical CPUs: 8
-
Features: [X] MMX ..... Intel Architecture MMX
Features: [X] SSE ..... Streaming SIMD Extensions
Features: [X] SSE2 .... Streaming SIMD Extensions 2
Features: [X] SSE3 .... Streaming SIMD Extensions 3
Features: [X] SSE3S ... Streaming SIMD Extensions 3 (supplemental)
Features: [X] SSE4.1 .. Streaming SIMD Extensions 4.1
Features: [X] SSE4.2 .. Streaming SIMD Extensions 4.2
Features: [X] AVX ..... Advanced Vector Extensions 1 instruction set
Features: [X] AVX2 .... Advanced Vector Extensions 2 instruction set
Features: [X] The operating system supports AVX
Features: [X] The processor supports MOVBE instruction
Features: [X] AES instruction
Features: [X] PCLMULQDQ instruction
Features: [X] Read Random Number instructions
Features: [X] Float16 instructions
Features: [X] ADCX and ADOX instructions
Features: [X] The RDSEED instruction
Features: [X] The PREFETCHW instruction
Features: [_] Knights Corner instruction set
14:37:58.463: Favourites: Loading C:\Users\rfenl\AppData\Roaming\SDR-RADIO.com (V3)\Console\Ident0\SDR-FavDefault_000.xml
14:37:58.463: Favourites: Loaded 1
14:37:58.463: Favourite:
14:37:58.947: Receiver 1: Enabled No
14:37:58.947: Receiver 2: Enabled No
14:37:58.947: Receiver 3: Enabled No
14:37:58.947: Receiver 4: Enabled Yes
14:37:58.947: Receiver 5: Enabled No
14:37:58.947: Receiver 6: Enabled No
14:37:59.072: MIDI
14:37:59.151: Digital Decoder [0] Demod> Starting thread
14:37:59.151: Digital Decoder [0] Demod> Setting priority to 'Below normal' (-1)
14:37:59.151: Digital Decoder [0] FFT> Starting thread
14:37:59.151: Digital Decoder [0] FFT> Setting priority to 'Below normal' (-1)
14:37:59.151: Digital Decoder [0] Demod> Stopping thread Digital Decoder [0] Demod
14:37:59.151: Digital Decoder [0] FFT> Stopping thread Digital Decoder [0] FFT
14:37:59.151: Data Recorder> Starting thread
14:37:59.151: Data Recorder> Setting priority to 'Below normal' (-1)
14:37:59.151: Tmate2> Starting thread
14:37:59.151: Tmate2> Setting priority to 'Below normal' (-1)
14:37:59.151: FFTHelper> Starting thread
14:37:59.151: FFTHelper> Setting priority to 'Normal' (0)
14:37:59.151: OnSysCommand: nID 0000F030 SC_MAXIMIZE, lParam 00000000
14:37:59.151: Data Repeater> Starting thread
14:37:59.151: Data Repeater> Setting priority to 'Normal' (0)
14:37:59.166: Adding receiver 1
14:37:59.166: Creating new receiver, current count 0
14:37:59.166: RX1 Audio
14:37:59.166: RX1 Recording
14:37:59.166: RX1 Recording> Starting thread
14:37:59.166: RX1 Recording> Setting priority to 'Lowest' (-2)
14:37:59.166: RX1 Audio> Starting thread
14:37:59.166: RX1 Audio> Setting priority to 'Highest' (2)
14:37:59.166: RX1 Demod
14:37:59.166: RX1 Demod> Starting thread
14:37:59.166: RX1 Demod> Setting priority to 'Above normal' (1)
14:37:59.166: RX1 RDS
14:37:59.166: RX1 RDS> Starting thread
14:37:59.166: RX1 RDS> Setting priority to 'Below normal' (-1)
14:37:59.166: Created receiver 1
14:37:59.166: -
14:37:59.166: Adding receiver 2
14:37:59.166: Creating new receiver, current count 1
14:37:59.166: RX2 Audio
14:37:59.166: RX2 Recording
14:37:59.166: RX2 Recording> Starting thread
14:37:59.166: RX2 Recording> Setting priority to 'Lowest' (-2)
14:37:59.166: RX2 Audio> Starting thread
14:37:59.166: RX2 Audio> Setting priority to 'Highest' (2)
14:37:59.166: RX2 Demod
14:37:59.166: RX2 Demod> Starting thread
14:37:59.166: RX2 Demod> Setting priority to 'Above normal' (1)
14:37:59.166: Chaining RX1 Demod to RX2 Demod
14:37:59.166: RX2 RDS
14:37:59.166: RX2 RDS> Starting thread
14:37:59.166: RX2 RDS> Setting priority to 'Below normal' (-1)
14:37:59.166: Created receiver 2
14:37:59.166: -
14:37:59.166: Adding receiver 3
14:37:59.166: Creating new receiver, current count 2
14:37:59.166: RX3 Audio
14:37:59.166: RX3 Recording
14:37:59.166: RX3 Recording> Starting thread
14:37:59.166: RX3 Recording> Setting priority to 'Lowest' (-2)
14:37:59.166: RX3 Audio> Starting thread
14:37:59.166: RX3 Audio> Setting priority to 'Highest' (2)
14:37:59.166: RX3 Demod
14:37:59.166: RX3 Demod> Starting thread
14:37:59.166: RX3 Demod> Setting priority to 'Above normal' (1)
14:37:59.166: Chaining RX2 Demod to RX3 Demod
14:37:59.166: RX3 RDS
14:37:59.166: RX3 RDS> Starting thread
14:37:59.166: RX3 RDS> Setting priority to 'Below normal' (-1)
14:37:59.166: Created receiver 3
14:37:59.166: -
14:37:59.166: Adding receiver 4
14:37:59.166: Creating new receiver, current count 3
14:37:59.166: RX4 Audio
14:37:59.166: RX4 Recording
14:37:59.166: RX4 Recording> Starting thread
14:37:59.166: RX4 Recording> Setting priority to 'Lowest' (-2)
14:37:59.166: RX4 Audio> Starting thread
14:37:59.166: RX4 Audio> Setting priority to 'Highest' (2)
14:37:59.166: RX4 Demod
14:37:59.166: RX4 Demod> Starting thread
14:37:59.166: RX4 Demod> Setting priority to 'Above normal' (1)
14:37:59.166: Chaining RX3 Demod to RX4 Demod
14:37:59.166: RX4 RDS
14:37:59.166: RX4 RDS> Starting thread
14:37:59.166: RX4 RDS> Setting priority to 'Below normal' (-1)
14:37:59.166: Created receiver 4
14:37:59.166: -
14:37:59.166: Adding receiver 5
14:37:59.166: Creating new receiver, current count 4
14:37:59.166: RX5 Audio
14:37:59.166: RX5 Recording
14:37:59.166: RX5 Recording> Starting thread
14:37:59.166: RX5 Recording> Setting priority to 'Lowest' (-2)
14:37:59.166: RX5 Audio> Starting thread
14:37:59.166: RX5 Audio> Setting priority to 'Highest' (2)
14:37:59.166: RX5 Demod
14:37:59.166: RX5 Demod> Starting thread
14:37:59.166: RX5 Demod> Setting priority to 'Above normal' (1)
14:37:59.166: Chaining RX4 Demod to RX5 Demod
14:37:59.166: RX5 RDS
14:37:59.166: RX5 RDS> Starting thread
14:37:59.166: RX5 RDS> Setting priority to 'Below normal' (-1)
14:37:59.166: Created receiver 5
14:37:59.166: -
14:37:59.166: Adding receiver 6
14:37:59.166: Creating new receiver, current count 5
14:37:59.166: RX6 Audio
14:37:59.166: RX6 Recording
14:37:59.166: RX6 Recording> Starting thread
14:37:59.166: RX6 Recording> Setting priority to 'Lowest' (-2)
14:37:59.166: RX6 Audio> Starting thread
14:37:59.166: RX6 Audio> Setting priority to 'Highest' (2)
14:37:59.166: RX6 Demod
14:37:59.166: RX6 Demod> Starting thread
14:37:59.166: RX6 Demod> Setting priority to 'Above normal' (1)
14:37:59.166: Chaining RX5 Demod to RX6 Demod
14:37:59.166: RX6 RDS
14:37:59.166: RX6 RDS> Starting thread
14:37:59.166: RX6 RDS> Setting priority to 'Below normal' (-1)
14:37:59.166: Created receiver 6
14:37:59.166: -
14:37:59.166: RX1 Audio> WASAPI: Opening "Default"
14:37:59.166: RX3 Audio> WASAPI: Opening "Default"
14:37:59.166: RX2 Audio> WASAPI: Opening "Default"
14:37:59.166: RX5 Audio> WASAPI: Opening "Default"
14:37:59.166: RX4 Audio> WASAPI: Opening "Default"
14:37:59.166: RX6 Audio> WASAPI: Opening "Default"
14:37:59.166: RX1 Audio> Default device: Speakers / Headphones (Realtek Audio)...
14:37:59.166: RX1 Audio> Opening: Speakers / Headphones (Realtek Audio)
14:37:59.166: RX3 Demod> Receiver is enabled
14:37:59.166: RX5 Demod> Receiver is enabled
14:37:59.166: RX4 Demod> Receiver is enabled
14:37:59.166: RX2 Demod> Receiver is enabled
14:37:59.166: RX6 Demod> Receiver is enabled
14:37:59.166: RX1 Demod> Receiver is enabled
14:37:59.166: RX3 Audio> Default device: Speakers / Headphones (Realtek Audio)...
14:37:59.166: RX3 Audio> Opening: Speakers / Headphones (Realtek Audio)
14:37:59.166: RX1 Audio> Activating audio client
14:37:59.166: RX3 Audio> Activating audio client
14:37:59.166: RX2 Audio> Default device: Speakers / Headphones (Realtek Audio)...
14:37:59.166: RX2 Audio> Opening: Speakers / Headphones (Realtek Audio)
14:37:59.166: RX5 Audio> Default device: Speakers / Headphones (Realtek Audio)...
14:37:59.166: RX5 Audio> Opening: Speakers / Headphones (Realtek Audio)
14:37:59.166: RX4 Audio> Default device: Speakers / Headphones (Realtek Audio)...
14:37:59.166: RX4 Audio> Opening: Speakers / Headphones (Realtek Audio)
14:37:59.182: RX2 Audio> Activating audio client
14:37:59.182: RX5 Audio> Activating audio client
14:37:59.182: RX4 Audio> Activating audio client
14:37:59.182: RX6 Audio> Default device: Speakers / Headphones (Realtek Audio)...
14:37:59.182: RX6 Audio> Opening: Speakers / Headphones (Realtek Audio)
14:37:59.182: RX6 Audio> Activating audio client
14:37:59.182: RX1 Audio>
14:37:59.182: RX3 Audio>
14:37:59.182: RX2 Audio>
14:37:59.182: RX4 Audio>
14:37:59.182: RX5 Audio>
14:37:59.182: RX3 Audio> ***
14:37:59.182: RX3 Audio> *
14:37:59.182: RX3 Audio> * Speakers / Headphones (Realtek Audio)
14:37:59.182: RX3 Audio> *
14:37:59.182: RX3 Audio> * Mixer format (from audio engine):
14:37:59.182: RX3 Audio> * Mode ................: Shared
14:37:59.182: RX3 Audio> * Channels ............: 2
14:37:59.182: RX3 Audio> * Structure ...........: PCM data that has more than two channels or uses a channel mask (WAVE_FORMAT_EXTENSIBLE)
14:37:59.182: RX3 Audio> * Bits per sample .....: 32
14:37:59.182: RX3 Audio> * Samples per second ..: 48000
14:37:59.182: RX3 Audio> * Block alignment .....: 8
14:37:59.182: RX3 Audio> * Bytes per second ....: 384000
14:37:59.182: RX3 Audio> * Extensible:
14:37:59.182: RX3 Audio> * Bits of precision ...: 32
14:37:59.182: RX3 Audio> * Samples per block ...: 32
14:37:59.182: RX3 Audio> * Channel mask ........: 00000003
14:37:59.182: RX3 Audio> * GUID ................: {00000003-0000-0010-8000-00AA00389B71}
14:37:59.182: RX2 Audio> ***
14:37:59.182: RX2 Audio> *
14:37:59.182: RX2 Audio> * Speakers / Headphones (Realtek Audio)
14:37:59.182: RX2 Audio> *
14:37:59.182: RX2 Audio> * Mixer format (from audio engine):
14:37:59.182: RX2 Audio> * Mode ................: Shared
14:37:59.182: RX2 Audio> * Channels ............: 2
14:37:59.182: RX2 Audio> * Structure ...........: PCM data that has more than two channels or uses a channel mask (WAVE_FORMAT_EXTENSIBLE)
14:37:59.182: RX2 Audio> * Bits per sample .....: 32
14:37:59.182: RX5 Audio> ***
14:37:59.182: RX2 Audio> * Samples per second ..: 48000
14:37:59.182: RX5 Audio> *
14:37:59.182: RX5 Audio> * Speakers / Headphones (Realtek Audio)
14:37:59.182: RX2 Audio> * Block alignment .....: 8
14:37:59.182: RX5 Audio> *
14:37:59.182: RX5 Audio> * Mixer format (from audio engine):
14:37:59.182: RX1 Audio> ***
14:37:59.182: RX5 Audio> * Mode ................: Shared
14:37:59.182: RX2 Audio> * Bytes per second ....: 384000
14:37:59.182: RX1 Audio> *
14:37:59.182: RX5 Audio> * Channels ............: 2
14:37:59.182: RX2 Audio> * Extensible:
14:37:59.182: RX1 Audio> * Speakers / Headphones (Realtek Audio)
14:37:59.182: RX2 Audio> * Bits of precision ...: 32
14:37:59.182: RX5 Audio> * Structure ...........: PCM data that has more than two channels or uses a channel mask (WAVE_FORMAT_EXTENSIBLE)
14:37:59.182: RX1 Audio> *
14:37:59.182: RX2 Audio> * Samples per block ...: 32
14:37:59.182: RX5 Audio> * Bits per sample .....: 32
14:37:59.182: RX1 Audio> * Mixer format (from audio engine):
14:37:59.182: RX2 Audio> * Channel mask ........: 00000003
14:37:59.182: RX5 Audio> * Samples per second ..: 48000
14:37:59.182: RX1 Audio> * Mode ................: Shared
14:37:59.182: RX2 Audio> * GUID ................: {00000003-0000-0010-8000-00AA00389B71}
14:37:59.182: RX5 Audio> * Block alignment .....: 8
14:37:59.182: RX1 Audio> * Channels ............: 2
14:37:59.182: RX5 Audio> * Bytes per second ....: 384000
14:37:59.182: RX1 Audio> * Structure ...........: PCM data that has more than two channels or uses a channel mask (WAVE_FORMAT_EXTENSIBLE)
14:37:59.182: RX5 Audio> * Extensible:
14:37:59.182: RX4 Audio> ***
14:37:59.182: RX1 Audio> * Bits per sample .....: 32
14:37:59.182: RX5 Audio> * Bits of precision ...: 32
14:37:59.182: RX4 Audio> *
14:37:59.182: RX1 Audio> * Samples per second ..: 48000
14:37:59.182: RX5 Audio> * Samples per block ...: 32
14:37:59.182: RX6 Audio>
14:37:59.182: RX4 Audio> * Speakers / Headphones (Realtek Audio)
14:37:59.182: RX1 Audio> * Block alignment .....: 8
14:37:59.182: RX5 Audio> * Channel mask ........: 00000003
14:37:59.182: RX4 Audio> *
14:37:59.182: RX1 Audio> * Bytes per second ....: 384000
14:37:59.182: RX5 Audio> * GUID ................: {00000003-0000-0010-8000-00AA00389B71}
14:37:59.182: RX4 Audio> * Mixer format (from audio engine):
14:37:59.182: RX1 Audio> * Extensible:
14:37:59.182: RX4 Audio> * Mode ................: Shared
14:37:59.182: RX1 Audio> * Bits of precision ...: 32
14:37:59.182: RX1 Audio> * Samples per block ...: 32
14:37:59.197: RX1 Audio> * Channel mask ........: 00000003
14:37:59.197: RX1 Audio> * GUID ................: {00000003-0000-0010-8000-00AA00389B71}
14:37:59.197: RX4 Audio> * Channels ............: 2
14:37:59.197: RX4 Audio> * Structure ...........: PCM data that has more than two channels or uses a channel mask (WAVE_FORMAT_EXTENSIBLE)
14:37:59.197: RX4 Audio> * Bits per sample .....: 32
14:37:59.197: RX4 Audio> * Samples per second ..: 48000
14:37:59.197: RX4 Audio> * Block alignment .....: 8
14:37:59.197: RX4 Audio> * Bytes per second ....: 384000
14:37:59.197: RX4 Audio> * Extensible:
14:37:59.197: RX4 Audio> * Bits of precision ...: 32
14:37:59.197: RX4 Audio> * Samples per block ...: 32
14:37:59.197: RX4 Audio> * Channel mask ........: 00000003
14:37:59.197: RX4 Audio> * GUID ................: {00000003-0000-0010-8000-00AA00389B71}
14:37:59.197: RX6 Audio> ***
14:37:59.197: RX6 Audio> *
14:37:59.197: RX6 Audio> * Speakers / Headphones (Realtek Audio)
14:37:59.197: RX6 Audio> *
14:37:59.197: RX6 Audio> * Mixer format (from audio engine):
14:37:59.197: RX6 Audio> * Mode ................: Shared
14:37:59.197: RX6 Audio> * Channels ............: 2
14:37:59.197: RX6 Audio> * Structure ...........: PCM data that has more than two channels or uses a channel mask (WAVE_FORMAT_EXTENSIBLE)
14:37:59.197: RX6 Audio> * Bits per sample .....: 32
14:37:59.197: RX6 Audio> * Samples per second ..: 48000
14:37:59.197: RX6 Audio> * Block alignment .....: 8
14:37:59.197: RX6 Audio> * Bytes per second ....: 384000
14:37:59.197: RX6 Audio> * Extensible:
14:37:59.197: RX6 Audio> * Bits of precision ...: 32
14:37:59.197: RX6 Audio> * Samples per block ...: 32
14:37:59.197: RX6 Audio> * Channel mask ........: 00000003
14:37:59.197: RX6 Audio> * GUID ................: {00000003-0000-0010-8000-00AA00389B71}
14:37:59.197: Data Recorder> Scheduler loading XML
14:37:59.197: Data Recorder> Definitions ..: 0
14:37:59.197: Data Recorder> -
14:37:59.197: Data Recorder> Scheduler enable
14:37:59.197: Data Recorder> Enabled ..: 0
14:37:59.197: Data Recorder> -
14:37:59.229: RX1 Audio> *
14:37:59.229: RX2 Audio> *
14:37:59.229: RX6 Audio> *
14:37:59.229: RX1 Audio> * Stream format (above) is supported
14:37:59.229: RX4 Audio> *
14:37:59.229: RX2 Audio> * Stream format (above) is supported
14:37:59.229: RX5 Audio> *
14:37:59.229: RX6 Audio> * Stream format (above) is supported
14:37:59.229: RX1 Audio> *
14:37:59.229: RX2 Audio> *
14:37:59.229: RX4 Audio> * Stream format (above) is supported
14:37:59.244: RX5 Audio> * Stream format (above) is supported
14:37:59.244: RX6 Audio> *
14:37:59.244: RX1 Audio> ***
14:37:59.244: RX2 Audio> ***
14:37:59.244: RX4 Audio> *
14:37:59.244: RX5 Audio> *
14:37:59.244: RX6 Audio> ***
14:37:59.244: RX1 Audio>
14:37:59.244: RX2 Audio>
14:37:59.244: RX4 Audio> ***
14:37:59.244: RX5 Audio> ***
14:37:59.244: RX6 Audio>
14:37:59.244: RX4 Audio>
14:37:59.244: RX3 Audio> *
14:37:59.244: RX5 Audio>
14:37:59.244: RX3 Audio> * Stream format (above) is supported
14:37:59.244: RX3 Audio> *
14:37:59.244: RX3 Audio> ***
14:37:59.244: RX3 Audio>
14:37:59.932: Select Radio> Loading support DLLs
14:37:59.932: Select Radio> --------------------
14:37:59.932: Select Radio> Search ...........: C:\Program Files\SDR-Radio.com (V3)\SDRSource*.dll
14:37:59.932: Select Radio> -
14:37:59.932: Afedri-SDR (LAN)
14:37:59.932: Afedri-SDR (USB)
14:37:59.932: SDR MK1.5 Andrus
14:37:59.932: bladeRF
14:37:59.932: ELAD FDM-S1/S2
14:37:59.932: Ettus Research (all models)
14:37:59.932: Radio Ettus: Ettus> Boost: Platform=Win32; Compiler=Microsoft Visual C++ version 12.0; Version=Boost_1_61_0
14:37:59.932: Radio Ettus: Ettus> UHD: Version=310.000.099, ABI=UHD_3.10.0
14:37:59.932: FUNcube Dongles
14:37:59.932: HackRF
14:37:59.932: RFspace: CloudIQ, CloudSDR, NetSDR, SDR-IP
14:37:59.932: RTL Dongle
14:37:59.932: RTL Dongle (TCP)
14:37:59.932: RFspace: SDR-IQ and SDR-14
14:37:59.932: SDRplay
14:37:59.932: SoftRock (Si570)
14:37:59.932: Select Radio> -
14:37:59.932: Select Radio> Filename DLL Name Date Unique ID Version
14:37:59.932: Select Radio> ---------------------------------------------------------------------------------------------------------------------------
14:37:59.932: Select Radio> SDRSourceAfedriLAN.dll Afedri-SDR (LAN) Aug 13 2018, 15:25:50 Afedri-LAN 1.0.0
14:37:59.932: Select Radio> SDRSourceAfedriUSB.dll Afedri-SDR (USB) Aug 13 2018, 15:25:51 Afedri-USB 1.0.0
14:37:59.932: Select Radio> SDRSourceAirspy.dll Airspy Aug 13 2018, 15:25:38 Airspy.com 1.0.0
14:37:59.932: Select Radio> SDRSourceAirspyHFPlus.dll Airspy HF+ Aug 13 2018, 15:26:05 Airspy HF+ 1.0.0
14:37:59.932: Select Radio> SDRSourceAirspyServer.dll Airspy (SPY Server) Aug 13 2018, 15:26:07 Airspy (SPY Server) 1.0.0
14:37:59.932: Select Radio> SDRSourceAndrusMK1d5.dll SDR MK1.5 Andrus Aug 13 2018, 15:25:40 SDR MK1.5 Andrus 1.0.0
14:37:59.948: Select Radio> SDRSourceBladeRF.dll bladeRF Aug 13 2018, 15:25:33 Nuand-BladeRF 1.0.0
14:37:59.948: Select Radio> SDRSourceEladFDMS1.dll ELAD FDM-S1/S2 Aug 13 2018, 15:25:41 ELAD-FDM-S1LAN 1.0.0
14:37:59.948: Select Radio> SDRSourceEttus.dll Ettus Research (all models) Aug 13 2018, 15:25:53 Ettus001 1.0.0
14:37:59.948: Select Radio> SDRSourceFUNcube.dll FUNcube Dongles Aug 13 2018, 15:25:44 FUNcube 1.0.0
14:37:59.948: Select Radio> SDRSourceHackRF.dll HackRF Aug 13 2018, 15:25:36 HackRF One 1.0.0
14:37:59.948: Select Radio> SDRSourceICOM.dll ICOM IC-R8600 Aug 13 2018, 15:26:15 ICOM-001 1.0.0
14:37:59.948: Select Radio> SDRSourceLime.dll LimeSDR Aug 13 2018, 15:25:57 limesdr.org 1.0.0
14:37:59.948: Select Radio> SDRSourceNetSDR.dll RFspace: CloudIQ, CloudSDR, NetSDR, SDR-IP Aug 13 2018, 15:25:39 RFspace001 1.0.0
14:37:59.948: Select Radio> SDRSourceOpenHPSDR.dll ANAN (OpenHPSDR) Aug 13 2018, 15:25:37 OpenHPSDR 1.0.0
14:37:59.948: Select Radio> SDRSourcePerseus.dll Microtelecom: Perseus Aug 13 2018, 15:25:43 Microtelecom001 1.0.0
14:37:59.948: Select Radio> SDRSourceRTL2832U.dll RTL Dongle Aug 13 2018, 15:25:44 RTL SDR (USB) 1.1.0
14:37:59.948: Select Radio> SDRSourceRTLSDR.dll RTL Dongle (TCP) Aug 13 2018, 15:25:44 RTL SDR (TCP) 1.0.0
14:37:59.948: Select Radio> SDRSourceSDRIQ.dll RFspace: SDR-IQ and SDR-14 Aug 13 2018, 15:25:46 RFspace002 1.0.0
14:37:59.948: Select Radio> SDRSourceSDRplay.dll SDRplay Aug 13 2018, 15:25:49 SDRplay 1.0.0
14:37:59.948: Select Radio> SDRSourceServer.dll V3 Server Aug 13 2018, 15:26:27 V3Server 1.0.0
14:37:59.948: Select Radio> SDRSourceSoftRockSi570.dll SoftRock (Si570) Aug 13 2018, 15:25:49 SoftRock (Si570) 1.0.0
14:37:59.948: Select Radio> SDRSourceSoftRockXTAL.dll SoftRock (XTAL) Aug 13 2018, 15:25:57 SoftRock (XTAL) 1.0.0
14:37:59.948: Select Radio> -
14:37:59.948: Select Radio> Selecting Radio
14:37:59.948: Radio V3Server> Creating socket
14:37:59.948: Radio V3Server> Connecting to 81.174.138.141::50102, timeout 5 seconds
14:37:59.948: Radio V3Server> Connected
14:37:59.948: Radio V3Server> Sending <SVRMsg xml:lang="EN" Command="Bandwidth" Model="SDRPlay RSP1A"></SVRMsg>
14:37:59.948: Radio V3Server> Reply
14:37:59.948: Radio V3Server> XML: <SVRMsg xml:lang="EN" Command="Bandwidth" Bandwidth="30000,40000,50000,75000,100000,125000,150000"></SVRMsg>
14:37:59.948: Radio V3Server> Command: Bandwidth
14:37:59.948: Radio V3Server> Error:
14:37:59.948: Radio V3Server> Bandwidths: 30000,40000,50000,75000,100000,125000,150000
14:37:59.948: Radio V3Server> -
14:37:59.948: Radio V3Server> Close socket
14:37:59.948: Radio V3Server> Closed
14:37:59.948: Server
14:37:59.948: Closed
14:37:59.948: -
14:37:59.948: Select Radio> Bandwidth List
14:37:59.948: Select Radio> --------------
14:37:59.948: Select Radio> Model ....: SDRPlay RSP1A
14:37:59.948: Select Radio> Address ..: 81.174.138.141::50102
14:37:59.948: Select Radio> List .....: 30000,40000,50000,75000,100000,125000,150000
14:37:59.948: Select Radio>
14:38:00.401: RX4 Audio> Initialised OK
14:38:00.401: RX4 Audio>
14:38:00.401: RX5 Audio> Initialised OK
14:38:00.401: RX5 Audio>
14:38:00.401: RX2 Audio> Initialised OK
14:38:00.401: RX1 Audio> Initialised OK
14:38:00.401: RX2 Audio>
14:38:00.401: RX1 Audio>
14:38:00.401: RX3 Audio> Initialised OK
14:38:00.401: RX3 Audio>
14:38:00.401: RX6 Audio> Initialised OK
14:38:00.401: RX6 Audio>
14:38:00.401: RX4 Audio> ***
14:38:00.401: RX4 Audio> *
14:38:00.401: RX4 Audio> * Speakers / Headphones (Realtek Audio)
14:38:00.401: RX4 Audio> *
14:38:00.401: RX4 Audio> * Endpoint buffer: size of the endpoint buffer (frames)
14:38:00.401: RX4 Audio> * Max latency: minimum amount of data to write during any single processing pass
14:38:00.401: RX4 Audio> * Device period: length of the periodic interval separating successive processing
14:38:00.401: RX4 Audio> passes by the audio engine on the data in the endpoint buffer
14:38:00.401: RX4 Audio> * Processing: interval separating successive processing passes
14:38:00.401: RX4 Audio> *
14:38:00.401: RX4 Audio> * Endpoint buffer: frames ..........: 1056
14:38:00.401: RX4 Audio> * period ..........: 22 ms
14:38:00.401: RX4 Audio> * Device period: default .........: 100000 (100 ns)
14:38:00.401: RX4 Audio> * minimum .........: 30000 (100 ns)
14:38:00.401: RX4 Audio> * Max latency: period ..........: 0 (100 ns)
14:38:00.401: RX4 Audio> * frames ..........: 0
14:38:00.401: RX4 Audio> * period ..........: 0 ms
14:38:00.401: RX4 Audio> * Processing: default period ..: 10 ms (shared)
14:38:00.401: RX4 Audio> * minimum period ..: 3 ms (exclusive)
14:38:00.401: RX4 Audio> *
14:38:00.401: RX4 Audio> ***
14:38:00.401: RX4 Audio>
14:38:00.401: RX4 Audio> Virtual audio cable detected: No
14:38:00.401: RX4 Audio>
14:38:00.401: RX1 Audio> ***
14:38:00.401: RX1 Audio> *
14:38:00.401: RX1 Audio> * Speakers / Headphones (Realtek Audio)
14:38:00.401: RX1 Audio> *
14:38:00.401: RX1 Audio> * Endpoint buffer: size of the endpoint buffer (frames)
14:38:00.401: RX1 Audio> * Max latency: minimum amount of data to write during any single processing pass
14:38:00.401: RX1 Audio> * Device period: length of the periodic interval separating successive processing
14:38:00.401: RX1 Audio> passes by the audio engine on the data in the endpoint buffer
14:38:00.401: RX1 Audio> * Processing: interval separating successive processing passes
14:38:00.401: RX1 Audio> *
14:38:00.401: RX1 Audio> * Endpoint buffer: frames ..........: 1056
14:38:00.401: RX1 Audio> * period ..........: 22 ms
14:38:00.401: RX1 Audio> * Device period: default .........: 100000 (100 ns)
14:38:00.401: RX1 Audio> * minimum .........: 30000 (100 ns)
14:38:00.401: RX1 Audio> * Max latency: period ..........: 0 (100 ns)
14:38:00.401: RX2 Audio> ***
14:38:00.401: RX1 Audio> * frames ..........: 0
14:38:00.401: RX2 Audio> *
14:38:00.401: RX1 Audio> * period ..........: 0 ms
14:38:00.401: RX2 Audio> * Speakers / Headphones (Realtek Audio)
14:38:00.401: RX1 Audio> * Processing: default period ..: 10 ms (shared)
14:38:00.401: RX2 Audio> *
14:38:00.401: RX2 Audio> * Endpoint buffer: size of the endpoint buffer (frames)
14:38:00.401: RX1 Audio> * minimum period ..: 3 ms (exclusive)
14:38:00.401: RX2 Audio> * Max latency: minimum amount of data to write during any single processing pass
14:38:00.401: RX1 Audio> *
14:38:00.401: RX2 Audio> * Device period: length of the periodic interval separating successive processing
14:38:00.401: RX1 Audio> ***
14:38:00.417: RX2 Audio> passes by the audio engine on the data in the endpoint buffer
14:38:00.417: RX1 Audio>
14:38:00.417: RX2 Audio> * Processing: interval separating successive processing passes
14:38:00.417: RX2 Audio> *
14:38:00.417: RX2 Audio> * Endpoint buffer: frames ..........: 1056
14:38:00.418: RX2 Audio> * period ..........: 22 ms
14:38:00.418: RX2 Audio> * Device period: default .........: 100000 (100 ns)
14:38:00.418: RX2 Audio> * minimum .........: 30000 (100 ns)
14:38:00.418: RX5 Audio> ***
14:38:00.418: RX3 Audio> ***
14:38:00.418: RX2 Audio> * Max latency: period ..........: 0 (100 ns)
14:38:00.418: RX5 Audio> *
14:38:00.418: RX3 Audio> *
14:38:00.418: RX2 Audio> * frames ..........: 0
14:38:00.418: RX1 Audio> Virtual audio cable detected: No
14:38:00.418: RX3 Audio> * Speakers / Headphones (Realtek Audio)
14:38:00.418: RX5 Audio> * Speakers / Headphones (Realtek Audio)
14:38:00.418: RX2 Audio> * period ..........: 0 ms
14:38:00.418: RX6 Audio> ***
14:38:00.418: RX1 Audio>
14:38:00.418: RX3 Audio> *
14:38:00.418: RX5 Audio> *
14:38:00.418: RX2 Audio> * Processing: default period ..: 10 ms (shared)
14:38:00.418: RX6 Audio> *
14:38:00.418: RX3 Audio> * Endpoint buffer: size of the endpoint buffer (frames)
14:38:00.418: RX5 Audio> * Endpoint buffer: size of the endpoint buffer (frames)
14:38:00.418: RX6 Audio> * Speakers / Headphones (Realtek Audio)
14:38:00.418: RX2 Audio> * minimum period ..: 3 ms (exclusive)
14:38:00.418: RX3 Audio> * Max latency: minimum amount of data to write during any single processing pass
14:38:00.418: RX5 Audio> * Max latency: minimum amount of data to write during any single processing pass
14:38:00.418: RX6 Audio> *
14:38:00.418: RX2 Audio> *
14:38:00.418: RX3 Audio> * Device period: length of the periodic interval separating successive processing
14:38:00.418: RX5 Audio> * Device period: length of the periodic interval separating successive processing
14:38:00.418: RX6 Audio> * Endpoint buffer: size of the endpoint buffer (frames)
14:38:00.418: RX2 Audio> ***
14:38:00.418: RX3 Audio> passes by the audio engine on the data in the endpoint buffer
14:38:00.418: RX5 Audio> passes by the audio engine on the data in the endpoint buffer
14:38:00.418: RX6 Audio> * Max latency: minimum amount of data to write during any single processing pass
14:38:00.418: RX2 Audio>
14:38:00.418: RX3 Audio> * Processing: interval separating successive processing passes
14:38:00.418: RX5 Audio> * Processing: interval separating successive processing passes
14:38:00.418: RX6 Audio> * Device period: length of the periodic interval separating successive processing
14:38:00.418: RX3 Audio> *
14:38:00.418: RX5 Audio> *
14:38:00.418: RX3 Audio> * Endpoint buffer: frames ..........: 1056
14:38:00.418: RX6 Audio> passes by the audio engine on the data in the endpoint buffer
14:38:00.418: RX5 Audio> * Endpoint buffer: frames ..........: 1056
14:38:00.418: RX3 Audio> * period ..........: 22 ms
14:38:00.418: RX6 Audio> * Processing: interval separating successive processing passes
14:38:00.418: RX5 Audio> * period ..........: 22 ms
14:38:00.418: RX3 Audio> * Device period: default .........: 100000 (100 ns)
14:38:00.418: RX6 Audio> *
14:38:00.418: RX5 Audio> * Device period: default .........: 100000 (100 ns)
14:38:00.418: RX3 Audio> * minimum .........: 30000 (100 ns)
14:38:00.418: RX6 Audio> * Endpoint buffer: frames ..........: 1056
14:38:00.418: RX2 Audio> Virtual audio cable detected: No
14:38:00.418: RX5 Audio> * minimum .........: 30000 (100 ns)
14:38:00.418: RX3 Audio> * Max latency: period ..........: 0 (100 ns)
14:38:00.418: RX6 Audio> * period ..........: 22 ms
14:38:00.418: RX2 Audio>
14:38:00.418: RX5 Audio> * Max latency: period ..........: 0 (100 ns)
14:38:00.418: RX3 Audio> * frames ..........: 0
14:38:00.418: RX6 Audio> * Device period: default .........: 100000 (100 ns)
14:38:00.418: RX5 Audio> * frames ..........: 0
14:38:00.418: RX3 Audio> * period ..........: 0 ms
14:38:00.418: RX6 Audio> * minimum .........: 30000 (100 ns)
14:38:00.418: RX5 Audio> * period ..........: 0 ms
14:38:00.418: RX3 Audio> * Processing: default period ..: 10 ms (shared)
14:38:00.418: RX6 Audio> * Max latency: period ..........: 0 (100 ns)
14:38:00.418: RX5 Audio> * Processing: default period ..: 10 ms (shared)
14:38:00.418: RX3 Audio> * minimum period ..: 3 ms (exclusive)
14:38:00.418: RX6 Audio> * frames ..........: 0
14:38:00.418: RX5 Audio> * minimum period ..: 3 ms (exclusive)
14:38:00.418: RX3 Audio> *
14:38:00.418: RX6 Audio> * period ..........: 0 ms
14:38:00.418: RX5 Audio> *
14:38:00.418: RX3 Audio> ***
14:38:00.418: RX6 Audio> * Processing: default period ..: 10 ms (shared)
14:38:00.418: RX5 Audio> ***
14:38:00.418: RX3 Audio>
14:38:00.418: RX6 Audio> * minimum period ..: 3 ms (exclusive)
14:38:00.418: RX5 Audio>
14:38:00.418: RX6 Audio> *
14:38:00.418: RX6 Audio> ***
14:38:00.418: RX6 Audio>
14:38:00.418: RX3 Audio> Virtual audio cable detected: No
14:38:00.418: RX3 Audio>
14:38:00.418: RX5 Audio> Virtual audio cable detected: No
14:38:00.418: RX5 Audio>
14:38:00.418: RX6 Audio> Virtual audio cable detected: No
14:38:00.418: RX6 Audio>
14:38:03.179: Default licence
14:38:03.179: Expiration .: Aug 13 2020, 05:00:00
14:38:03.179: Status .....: Day 30 of 731
14:38:03.179: -
|
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Terry Green
I tried running server 3 at my remote site but the client was locking up / severely broken audio. This is fed via air fibre with a 100mb fibre connection. On Wed, Sep 12, 2018 at 2:36 PM Rick Fenlon via Groups.Io <r_fenlon=yahoo.com@groups.io> wrote: Desktop |
|
|
|
Re: Server Issues? I have not been able to log on to any remotes?
Rick Fenlon
Desktop
|
|
|