|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Yes,
Oscar's code shows me the info I need to set the Bias-T. May have this working today, it's tough to keep going in this heat - 28C inside the house. I take George's lead and sleep during the afternoon. Out soon with George at 6AM 'cos it'll get too hot in an
hour.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 12 August 2022 05:12 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Ah - being sure you have the latest code is, I have been discovering, is awkward. Oscar's code is the code I've been working with. {^_^} On 20220811 09:14:45, Simon Brown wrote:
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
Ah - being sure you have the latest code is, I have been discovering, is awkward. Oscar's code is the code I've been working with. {^_^} On 20220811 09:14:45, Simon Brown
wrote:
|
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
Do you want the address for the SDDC EXTIO driver to drag stuff out of?
{^_^}
On 20220811 05:20:59, Simon Brown
wrote:
|
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
I'm fighting something else so getting in to dig out the data will take me awhile.
There is a way to dive in and pull out the serial number. On my machine it is not reliable. But the EXTIO code uses another hook to determine type. As soon as I get eyes on that code again I'll try to deal with it and get you data.
Let's see if I read the questions correctly. 1. difference as in RX666, RX888, and RX888 MKII? 2. Um, API code? It seems the only way in at the moment is the
EXTIO route. Anything else gets to use the Cypress USB API plus
guesswork for addresses to use. The easy approach would be to
build code to use EXTIO and never use it's GUI, do that part
yourself feeding the values into the EXTIO with your own GUI.
{^_^}
On 20220811 05:04:51, Simon Brown
wrote:
|
|
|
|
Re: Fw: [SDR-Radio] No RSP useable in SDR Console
#sdrplay
Sven SM6FMB
Hi!
Thank you for your advises I will test
when time occurs.
73 de Sven SM6FMB
Den 8/9/2022 kl. 10:43 PM, skrev Dennis
Matzen:
Sven, did you take the steps I recommended to remove all SDR Play software and re-install it? I had a similar issue last year and this cleaned up things on my PC.
|
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
And I now have the latest code, so I see how to set Bias-T for HT and VHF.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 11 August 2022 13:20 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Ah,
Found how to tell the difference, already in my code.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 11 August 2022 13:04 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 So,
It's about time I gave this radio some loving.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 10 August 2022 21:50 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 It is in my project queue. I can feed Simon with information about distinguishing one from another and controlling stuff RX666 does not have. One of the items in the project queue here has fallen into the recently done pile. So there is hope. Maybe I can
get back to what I'd been doing in a week or so.
{o.o}
On 20220810 04:08:53, Siegfried Jackstien wrote:
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Ah,
Found how to tell the difference, already in my code.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 11 August 2022 13:04 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 So,
It's about time I gave this radio some loving.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 10 August 2022 21:50 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 It is in my project queue. I can feed Simon with information about distinguishing one from another and controlling stuff RX666 does not have. One of the items in the project queue here has fallen into the recently done pile. So there is hope. Maybe I can
get back to what I'd been doing in a week or so.
{o.o}
On 20220810 04:08:53, Siegfried Jackstien wrote:
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
So,
It's about time I gave this radio some loving.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 10 August 2022 21:50 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 It is in my project queue. I can feed Simon with information about distinguishing one from another and controlling stuff RX666 does not have. One of the items in the project queue here has fallen into the recently done pile. So there is hope. Maybe I can
get back to what I'd been doing in a week or so.
{o.o}
On 20220810 04:08:53, Siegfried Jackstien wrote:
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: Remote Supported Radios
Just to be clear, there is no transmit support for remote radios.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 11 August 2022 12:20 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] Remote Supported Radios That's a mistake, shouldn't be there. I assume it does work for RX remotely, never tried it.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Pez T via groups.io <vk3xpt@...>
Sent: 11 August 2022 07:35 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] Remote Supported Radios Thanks Simon, when I do this, in server manager, I see "Elad FDM-DUO TRX" listed. Does this mean that the FDM-DUO is now supported for remote RX?? (I believe this was not the case as of a few months ago?)
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: Remote Supported Radios
That's a mistake, shouldn't be there. I assume it does work for RX remotely, never tried it.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Pez T via groups.io <vk3xpt@...>
Sent: 11 August 2022 07:35 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] Remote Supported Radios Thanks Simon, when I do this, in server manager, I see "Elad FDM-DUO TRX" listed. Does this mean that the FDM-DUO is now supported for remote RX?? (I believe this was not the case as of a few months ago?)
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: Remote Supported Radios
Pez T
Thanks Simon, when I do this, in server manager, I see "Elad FDM-DUO TRX" listed. Does this mean that the FDM-DUO is now supported for remote RX?? (I believe this was not the case as of a few months ago?)
|
|
|
|
Re: Remote Supported Radios
Yes,
To see a list just add a definition using the Server Manager. The list of possible radios you can add is shown there.
Software Defined Radio (sdr-radio.com) From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Pez T via groups.io <vk3xpt@...>
Sent: 11 August 2022 06:21 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] Remote Supported Radios Thanks Simon. I thought that would be the case with TX. Is there a list of RX supported radios? -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Re: Remote Supported Radios
Pez T
Thanks Simon. I thought that would be the case with TX. Is there a list of RX supported radios? |
|
|
|
Re: Remote Supported Radios
At present remote does not support transmit.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Pez T via groups.io <vk3xpt@...>
Sent: 11 August 2022 03:54 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: [SDR-Radio] Remote Supported Radios Hi Simon, I hope all is well. I am wondering if there is a published list of Radio's which are supported via the Remote (over internet) feature of Sdr-Console? (And then, if they offer RX support and/or TX support). I have looked on the website but I couldn't find
anything that made it clear. Thanks in advance, -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Remote Supported Radios
Pez T
Hi Simon, I hope all is well. I am wondering if there is a published list of Radio's which are supported via the Remote (over internet) feature of Sdr-Console? (And then, if they offer RX support and/or TX support). I have looked on the website but I couldn't find anything that made it clear. Thanks in advance, |
|
|
|
Re: RSPdx Display Question
agene
The RSPdx comes in a metal case. Mike.
------ Original Message ------
From: "Kriss Kliegle KA1GJU" <kliegle@...>
Sent: 10/08/2022 8:59:31 AM
Subject: Re: [SDR-Radio] RSPdx Display Question
|
|
|
|
Re: Afedri AFE822X dual channel Diversity/phasing support?
daiche
As far as digital phasing, we may very well have the simplest solution right now. Instead of the SDR vendor software combining the two channels in the recording, they simply need to lay down the 2 channels in side by side streams in the RIFF file and build the software that can playback the 2 streams while at the same time providing variable digital delay to one or the other channel, all done after the recording process is done. This process needs to be standardized to allow any 'raw' 2 or more channel recordings to be digitally phased and played back after the fact.
Right now we lay down the SDR RIFF recording with a fixed phasing schema which 'freezes' the delay into the recording. Not doing that, opens up the possibility for variable digital phasing, after the fact. Dave Aichelman N7NZH Grants Pass, Oregon |
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
A mass of code that does not always work. That is why it got pushed back on the project stack. {o.o} On 20220810 08:33:08, Simon Brown
wrote:
|
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
MKII features higher sample rates - at least. {^_^} On 20220810 04:14:33, Simon Brown
wrote:
|
|
|
|
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
It is in my project queue. I can feed Simon with information
about distinguishing one from another and controlling stuff RX666
does not have. One of the items in the project queue here has
fallen into the recently done pile. So there is hope. Maybe I can
get back to what I'd been doing in a week or so.
{o.o}
On 20220810 04:08:53, Siegfried
Jackstien wrote:
|
|
|