|
Re: satellites
Exactly right.
Look at the main display – the next pass will be barely visible…
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of cornie
Hi Steve, |
|
|
|
Re: Still no sound in sdr-console /sdr-radio
Ah,
User issue 😊 . Glad it’s fixed, odd that I saw the device but the device wasn’t working – had to be motherboard drivers. Haven’t come across this before.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Stephen Matthias
I managed to get the SDR-Radio Console sound working again. I had to go to a manufacturer's website, or proxy in my case, because Gateway went defunct. I downloaded potentially missing motherboard drivers from the website. Then I went to the Realtek drivers download site. I downloaded the Windows 10 .exe file. The program first removed all the realtek drivers and then, after a reboot, replaced them with up-to-date drivers. I then clicked on the launcher icon and, hey presto, I heard sound again. |
|
|
|
Lime SDR _ Coming Soon
OK,
Now looking at the LimeSDR transmit support, here’s what I will be doing for 3.0.6:
Apart from any urgent bug fixes my aim is to get the LimeSDR support fixed and release 3.0.6 in a week or so as Es’Hail 2 will be activated in the next days.
Simon Brown, G4ELI
|
|
|
|
Re: Still no sound in sdr-console /sdr-radio
I managed to get the SDR-Radio Console sound working again. I had to go to a manufacturer's website, or proxy in my case, because Gateway went defunct. I downloaded potentially missing motherboard drivers from the website. Then I went to the Realtek drivers download site. I downloaded the Windows 10 .exe file. The program first removed all the realtek drivers and then, after a reboot, replaced them with up-to-date drivers. I then clicked on the launcher icon and, hey presto, I heard sound again.
|
|
|
|
Re: Lime Tx spectrum in CW Tune
Brian Morrison
On Sat, 09 Feb 2019 12:08:09 -0800
"sm6fhz" <ingolf.fhz@...> wrote: I have no clue what Gateware is or does but it seems to make ahttps://github.com/myriadrf/LimeSDR-USB_GW This tells me that it is some code that configures an Altera FPGA in the Lime SDR, presumably you can read more if you want to find out what has been changed. -- Brian G8SEZ |
|
|
|
Re: Still no sound in sdr-console /sdr-radio
Alan G4ZFQ
When I tried to download the Realtek drivers again, there was a problem with downloading them to my computer.Stephen, What does Device Manager show? Windows often gives sound systems a driver that works. Have you checked Sound Properties to see what shows, is there a default playback device? 73 Alan G4ZFQ |
|
|
|
Re: Still no sound in sdr-console /sdr-radio
I think that the trouble is that I wiped my hard drive clean. Then I did the Windows 1809 Update. When I tried to download the Realtek drivers again, there was a problem with downloading them to my computer. On Fri, Feb 8, 2019 at 5:51 PM Colin Hurst <cjhurst@...> wrote:
|
|
|
|
Re: Lime Tx spectrum in CW Tune
Matthias
Hi Ingolf,
good to hear that you already solved your problem.
Your measurements are quite in line with mine (50dB carrier suppression and 42dB sideband suppression).
That is not perfect but should be enough to get started.
Kind regards
Matthias
Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Im Auftrag von sm6fhz via Groups.Io
Hi Matthias. Attachments: |
|
|
|
Re: Lime Tx spectrum in CW Tune
sm6fhz
Hi Matthias.
Thanks for looking into the problem I saw. I do use the Tx1-port. The Tx2 port gives much less output on these frequencies, I checked that as well ;-) I believe I found the cause for my problems. I had FW 1.4 but the Gateware I had was 2.14 and by updating to Gateware 2.19 the problem vanished :-) I have no clue what Gateware is or does but it seems to make a difference. Now with +8 dBm FT8-signal out I have a carrier suppression of ~50 dB and a sideband suppression of ~42 dB. About what you could expect. I enclose a SPA screenshot. The far out spurii is not that bad. Better than I feared and probably better than many commercial 432 MHz stations even without any filtering of the Lime Tx-signal. With filtering it will actually be fully OK. No picture enclosed of that here. 73 / Ingolf, SM6FHZ |
|
|
|
Re: 3.0.5 Available
Tony_AD0VC
As a point of reference, 3.04 and 3.05 both work fine on my Afedri SDR net 3.0 using the network connection mode. I have not tried the USB connection mode.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of minervois56 via Groups.Io <minervois56@...>
Sent: Saturday, February 9, 2019 6:44 AM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] 3.0.5 Available Hi Simon!
3.0.5 installed. Problems had on 3.0.4 still present on my Afedri and Win 10 64 bit. Program works fine on all modes except CW/LSB/USB. When switching to CW/LSB/USB the frequency spectrum pane freezes and I can not tune up and down. Any ideas? Thank you for your support! 73s Roberto |
|
|
|
Re: Lime Tx spectrum in CW Tune
Matthias
Sigi,
there are plenty of intermod / spurious signals …
I just wanted to go step by step and compare apples to apples to Ingolfs measurements-
Ingolf,
I may habe another idea:
I am using TX1 and the L-output (in SDR-Radio choose TX Ant: BAND1). When using the H-output I do not get a good signal.
Could you please double-check that you are also using that output ?
Regards
Matthias
Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Im Auftrag von Siegfried Jackstien
what is that on the left side of yor picture ... just 30 db down sigi Am 09.02.2019 um 15:55 schrieb Matthias Bopp:
|
|
|
|
Re: 3.0.5 Available
Thankyou, Aoki import A-OK here :)
Custom CSV Import of SWSKEDS .csv file works OK if .csv file's On and Off header entry fields are renamed to Time_On and Time_Off How much dog food would it take to have Sort by Column/Multi-column, Find, Select Language, On_Now, On_Next functionality added as well? :) 73s |
|
|
|
Re: 3.0.5 Available
Jean
Thanks for updates,
Anyway since version 3.0.4 the software freeze and finally crash when it's out of resources. It's eating all the memory until it crash. I'm back to v3.0.3 Best 73's Jean. |
|
|
|
Re: Lime Tx spectrum in CW Tune
Siegfried Jackstien
what is that on the left side of yor picture ... just 30 db down sigi Am 09.02.2019 um 15:55 schrieb Matthias
Bopp:
|
|
|
|
Re: Lime Tx spectrum in CW Tune
Matthias
Hi Ingolf,
I reproduced your measurements.
I tested with SDR-Console v3.04 bandwidth set to 6.144 MHz.
I transmitted on 432 MHz in USB with 2 tone (700 & 1900 MHz) set to -3dB.
One thing I notice is that you have a length of 257 in your TX BPF while I am using 2049.
The rest of the setting should be the same.
My spectrum looks quite different to yours - I do not know what is wrong with yours …
Best regards
Matthias
Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Im Auftrag von sm6fhz via Groups.Io
Hi. Attachments:
|
|
|
|
Re: sattelites
cornie
Hi Steve,
The text window shows only passes that reach the min elevation. Maybe that AOS shown in the main window is for a pass that has maximum elevation lower than 10 degrees. Cornie |
|
|
|
Re: 3.0.5 Available
minervois56 <minervois56@...>
Hi Simon!
3.0.5 installed. Problems had on 3.0.4 still present on my Afedri and Win 10 64 bit. Program works fine on all modes except CW/LSB/USB. When switching to CW/LSB/USB the frequency spectrum pane freezes and I can not tune up and down. Any ideas? Thank you for your support! 73s Roberto |
|
|
|
Connecting a CW-key
sm6fhz
Hi all.
How to connect a CW-key to SDR-console in order to send CW? 73 / Ingolf, SM6FHZ |
|
|
|
sattelites
M0ZEH <m0zeh@...>
Hi,
The AOS in the main window doesn't match that in the text passes list. Same in prevoius version. Steve M0zeh |
|
|
|
Re: 3.0.5 Available
EA7HGL
Thank you, Simon.
Antonio. EA7HGL |
|
|