Re: SDR Console and RX-888 MKII
#sdr-consolev3
Hot, not too hot though.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 13 August 2022 06:23 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 This is the airport a bit South of me. Ironically, my step-father's house was also North of Ontario. Both identified with the letters C and A. One is California the other is Canada. Aren't you excited to learn that?
https://www.wunderground.com/forecast/KONT Click on the 10 day and see our depressing reality. Where I am is a few hundred feet farther from the core of the Earth and 2F to 5F cooler. 100F is not at all bad if the humidity is low teens or lower. At higher humidity you can't evaporate the sweat as
fast as you generate it. Either way drink enough water that you wee normally.
{O,o}
On 20220812 21:57:13, Simon Brown wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
This is the airport a bit South of me. Ironically, my step-father's house was also North of Ontario. Both identified with the letters C and A. One is California the other is Canada. Aren't you excited to learn that?
https://www.wunderground.com/forecast/KONT Click on the 10 day and see our depressing reality. Where I am is
a few hundred feet farther from the core of the Earth and 2F to 5F
cooler. 100F is not at all bad if the humidity is low teens or
lower. At higher humidity you can't evaporate the sweat as fast as
you generate it. Either way drink enough water that you wee
normally.
{O,o}
On 20220812 21:57:13, Simon Brown
wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
With any luck we only have two more days of this. Nowhere near as warm as with you, the lack of rain is the issue.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 13 August 2022 03:15 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 101.1F today at 1530. Drought or not there have been a LOT of clouds lately, too. {^_^} On 20220812 01:12:58, Mag loop Simon wrote:
Its 9am.. currently approaching 34c in workshop here at work in London. Reached 37 yesterday ( in workshop.) Hotter today..roll on the weekend when I will be living in the garden under the grapes giving shade! Other Simon.. g0zen
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
I wonder if any of this is related to the volcano in Tonga that delivered a mega-payload of water into the upper atmosphere. Normally North and South don't mix much. But this was a huge dose of high greenhouse material in "just the right place."
{o.o}
On 20220812 18:36:44, Siegfried
Jackstien wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
Based on growing up with a view over Lake St. Claire to Canada to
the South of me from an altitude of maybe 40' to 50' above the
lake you are possibly just past where the sea breezes really help
moderate temperatures. The micro climate changed at about that
distance from the shore of the lake. It was nice on or near the
lake. It could get miserable inland just a bit. (The house was a
scary short distance from where the Brits dropped one of their
military jets on the US to the house's East. I saw the aftermath.
We were away from home at the time. The pilot just missed dropping
it in the river. And, yes, I did mean Canada being to the South
and being in the US.)
{o.o}
On 20220812 02:04:42, Simon Brown
wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
101.1F today at 1530. Drought or not there have been a LOT of clouds lately, too. {^_^} On 20220812 01:12:58, Mag loop Simon
wrote:
Its 9am.. currently approaching 34c in workshop here at work in London. Reached 37 yesterday ( in workshop.) Hotter today..roll on the weekend when I will be living in the garden under the grapes giving shade! Other Simon.. g0zen
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Siegfried Jackstien
and if too warm ... take a walk to ferryboat in for a cool cider :-) dg9bfc sigi Am 12.08.2022 um 11:04 schrieb Simon
Brown:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Fw: Groups.io Incident - Database connectivity issues - 12 August 2022
From: noreply@... <noreply@...>
Sent: 12 August 2022 14:09 To: Simon Brown <Simon@...> Subject: Groups.io Incident - Database connectivity issues - 12 August 2022
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
I'm close to the coast so warm but pleasant. Getting through too much cider, I think.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Jim Smith G0OFE via groups.io <sdr-radio@...>
Sent: 12 August 2022 10:13 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Pretty much the hottest region in England right now. Very unusual, that.
================================
Need help with SDR Console? If you have a problem: Go to https://www.sdr-radio.com/support Please follow instructions in that link. =================================== Jim, Bournemouth, Dorset. IO90BR. Elad FDM-S2, Airspy HF+, SDRPlay and Funcube Dongle SDR Recievers 8-element OP-DES for Band 2, 8-element LFA for 2m, 3-element LFA for 6m, 20m Windom for HF,. Wellbrook 1530 Loop for LF On 12/08/2022 09:04, Simon Brown wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Jim Smith G0OFE
Pretty much the hottest region in England right now. Very unusual, that.
================================
Need help with SDR Console? If you have a problem: Go to https://www.sdr-radio.com/support Please follow instructions in that link. =================================== Jim, Bournemouth, Dorset. IO90BR. Elad FDM-S2, Airspy HF+, SDRPlay and Funcube Dongle SDR Recievers 8-element OP-DES for Band 2, 8-element LFA for 2m, 3-element LFA for 6m, 20m Windom for HF,. Wellbrook 1530 Loop for LF On 12/08/2022 09:04, Simon Brown wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Cornwall, glorious Cornwall. 500m from the sea, gentle breeze blowing through the house...
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Mag loop Simon via groups.io <ohhellnotagain@...>
Sent: 12 August 2022 09:12 To: main@sdr-radio.groups.io <main@sdr-radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Its 9am.. currently approaching 34c in workshop here at work in London.
Reached 37 yesterday ( in workshop.) Hotter today..roll on the weekend when I will be living in the garden under the grapes giving shade! Other Simon.. g0zen -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
GPUs are dreadful for RFI.
Solar Cells - don't see a lot in the US so good for you.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 12 August 2022 08:09 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Yeah, 82 is a little high inside. Electricity being costly we tend to leave large portions of the house warmish such as 30.5 in the kitchen. That's with the benefit of some air conditioner usage. Bleah - I need to talk Loren into keeping it cooler in here. Electricity is cheap for us with the huge solar array.
Thinking of which - new APC UPS here. The old Matrix 5000s are gone. And 99% if the RF noise around here seems to be gone. All I have are some low level spurs every 60 kHz. I can live with that. I'm going to have to fix HF antenna and build out the HL2 I have and mostly have not used.
{^_^}
On 20220811 21:57:03, Simon Brown wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Its 9am.. currently approaching 34c in workshop here at work in London.
Reached 37 yesterday ( in workshop.) Hotter today..roll on the weekend when I will be living in the garden under the grapes giving shade! Other Simon.. g0zen
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
Yeah, 82 is a little high inside. Electricity being costly we tend to leave large portions of the house warmish such as 30.5 in the kitchen. That's with the benefit of some air conditioner usage. Bleah - I need to talk Loren into keeping it cooler in here. Electricity is cheap for us with the huge solar array.
Thinking of which - new APC UPS here. The old Matrix 5000s are gone. And 99% if the RF noise around here seems to be gone. All I have are some low level spurs every 60 kHz. I can live with that. I'm going to have to fix HF antenna and build out the HL2 I have and mostly have not used.
{^_^}
On 20220811 21:57:03, Simon Brown
wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
Yes,
Oscar's code shows me the info I need to set the Bias-T. May have this working today, it's tough to keep going in this heat - 28C inside the house. I take George's lead and sleep during the afternoon. Out soon with George at 6AM 'cos it'll get too hot in an
hour.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 12 August 2022 05:12 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Ah - being sure you have the latest code is, I have been discovering, is awkward. Oscar's code is the code I've been working with. {^_^} On 20220811 09:14:45, Simon Brown wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
Ah - being sure you have the latest code is, I have been discovering, is awkward. Oscar's code is the code I've been working with. {^_^} On 20220811 09:14:45, Simon Brown
wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
Do you want the address for the SDDC EXTIO driver to drag stuff out of?
{^_^}
On 20220811 05:20:59, Simon Brown
wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
jdow
I'm fighting something else so getting in to dig out the data will take me awhile.
There is a way to dive in and pull out the serial number. On my machine it is not reliable. But the EXTIO code uses another hook to determine type. As soon as I get eyes on that code again I'll try to deal with it and get you data.
Let's see if I read the questions correctly. 1. difference as in RX666, RX888, and RX888 MKII? 2. Um, API code? It seems the only way in at the moment is the
EXTIO route. Anything else gets to use the Cypress USB API plus
guesswork for addresses to use. The easy approach would be to
build code to use EXTIO and never use it's GUI, do that part
yourself feeding the values into the EXTIO with your own GUI.
{^_^}
On 20220811 05:04:51, Simon Brown
wrote:
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: Fw: [SDR-Radio] No RSP useable in SDR Console
#sdrplay
Sven SM6FMB
Hi!
Thank you for your advises I will test
when time occurs.
73 de Sven SM6FMB
Den 8/9/2022 kl. 10:43 PM, skrev Dennis
Matzen:
Sven, did you take the steps I recommended to remove all SDR Play software and re-install it? I had a similar issue last year and this cleaned up things on my PC.
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Re: SDR Console and RX-888 MKII
#sdr-consolev3
And I now have the latest code, so I see how to set Bias-T for HT and VHF.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 11 August 2022 13:20 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 Ah,
Found how to tell the difference, already in my code.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: 11 August 2022 13:04 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 So,
It's about time I gave this radio some loving.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of jdow via groups.io <jdow@...>
Sent: 10 August 2022 21:50 To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Subject: Re: [SDR-Radio] SDR Console and RX-888 MKII #sdr-consolev3 It is in my project queue. I can feed Simon with information about distinguishing one from another and controlling stuff RX666 does not have. One of the items in the project queue here has fallen into the recently done pile. So there is hope. Maybe I can
get back to what I'd been doing in a week or so.
{o.o}
On 20220810 04:08:53, Siegfried Jackstien wrote:
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|||||||||||||||||||||||||||
|