you need filters on rx end and tx filters also (if you wanna have a clean signal an tx) next is ... original the pluto is not stable in frequency ... so a bit of modding is needed (OR TO SAY IT SHORT

I would like to request such a feature as well. When tracking is enabled, instead of highlighting all stations using the given frequency at any time of day, it could highlight only those currently

The problem was on my end, I had UDP enabled (I am running a beta version that allows UDP from the server).Once I turned it off, I'm running two just fine. The choke point may be not using

So I think it’s time to get a SDR that transmits. I as looking at the Pluto SDR and it’s quite impressive. Seems to be in a nice price range. With a topside antenna you can hit local repeaters

So at least it is becoming clear that there seems to be something odd happening. Hope you can figure out what might have changed, I am stilling giving the option of compression on the network end

jdow, Windows treats the FunCubePro+ as an audio device… And Windows gives the same device a unique (i.e. different) name associated with each different USB port. Windows had managed to set

Houston... we have a problem... Something has changed in the past few days. I cannot operate more than one at a time via a server either... I can connect and start the other SDR (can see the signal

The Funcube acts as a sound card, have you checked the recording levels (with any "boost") while plugged into the two sockets? Cheers Stu

BTW... I have had two servers (Windows 10 OS) act up today, similar to what you are experiencing. SDR LED's said they were in use, but server said otherwise. I could connect to the radio, but no audio

ok j'ai vu, mais il y a quand mm des buses avec le premier modèle? le second est au mm prix que le premier, mais avec un tas d'accessoires...à choisir!! merci et bonnes

Hi, I’ll have a RSPdx on Tuesday Dec. 24th at the SDR Console HQ, so do not need any more volunteers for testing. With luck I’ll release 3.0.18 on Dec. 26th or 27th. Thanks for the

Hello, I have set up here a panadapter with ic-756pro2, with the RTL-SDR on the 1st IF freq. I have a few issues: when I'm changing frequency with the radio vfo the spectrum and waterfall are freezed

Hello Simon, Can i also test the V3 for the Rspdx? Geertings, Rolf

Hello Simon, Can i also get a test for the Rspdx radio? Greetings Rolf

Hello Simon, Can i also get a test for the Rspdx ?

No issue what so ever, I run 2 or 3 SDR's per server all the time. The issue can be the USB Buss and the power pulled by more than one SDR radio. If it's a laptop running as the server, try placing

Hi all, I am trying to figure out whether is should be possible to use an RSP1A (for Oscar 100) and an RSP2 (for HF/VHF/UHF) on one V3 server. Have tried a basic configuration and it looks like

Hi, Please click on Logfile and attach the result file. Simon Brown, G4ELI https://www.sdr-radio.com

What you are doing wrong: Not including a copy of the file. Not including any screenshots. I suggest: First save as CSV, Edit this CSV, then you know the format is correct. Simon Brown,

Is it possible that flexing the antenna cable makes and breaks the direct contact to the center conductor hole in the FCPP's RF input? The only other thing that comes to mind is that somehow it is