Hi, Screenshots: https://www.sdr-radio.com/Support#Screenshot please do NOT use a mobile phone! Also I want to know your computer’s operating system as reported by Windows, for example:

Earlier, I posted a post describing this phenomenon, and now a new version has been released. I want to see if the new version has the same problem. I downloaded the new version 3.0.18 of Sdr console

Hi, *Please* add the topic to the messages. I usually ignore messages unless the title indicates that it requires my attention. Simon Brown, G4ELI https://www.sdr-radio.com

Exactly! The correct way to do this is in the tracking software, not the DDE information. The DDE / SDR Console knows nothing about the rotator. Simon Brown, G4ELI https://www.sdr-radio.com

Hi, The problem is the fully automated operation: The PC needs to know always where the rotator is on its 720 degree track and determine in advance where the next automated tracking will happen

I can't prove it off hand but if you set to the 0 position thinking -360 to + 360 you'll always be set to cover a pass. Immediately reset after the pass. This MAY be best served by an external addon

Hello I Running the same configuration Kx3 W10 64 bits i5 4 cœurs V 3.0.18 All running fine F1EYG

Yes, Simon please also support rotators which can turn more than 360 degree. My rotator can turn 720 degrees and it would be nice if the tracking program determines before a pass is started whether

Hi Folks, While puttering around tracking a satellite I managed to invert my passband. Should this even be possible? Is there a way to return the passbands to default? The UI is not letting me fix it.

Unless your antenna can rotate more than 360 degrees - like 480 degrees or better 540 degrees ideally 729 degrees or even continuously simple geometry suggests you will run into end of travel

A full size picture showing settings is required in all but very very rare cases. It helps poor Simon do his magic. {^_^}

Oh, I sorry, I forgot to mention that there is no problem when I use 3.012 on the client side with the buffer at 100. Also, those playback buffer settings don't do have much effect. My server is

Thanks for the replies. I forgot about that buffer setting, duhh! Increasing it fixes it with your server Kriss, but not with mine, but it does help. Does that setting affect the server side or the

Simon, I see that you added a min/max drive for TX on the Lime. Is this something to assist in HF TX, by chance? I am out of town for a week plus, so cannot check it. Thank you, Ed

Turn the AGC ON, can’t think of any radio that I have owned that would sound good without it turned on. If the RSPDX is anything like its predecessors, one has to run incredible amount of negative

Simon, This is a followup request to consider adding a 'flip' mode to the satellite antenna tracking function. I used the automatic scheduler to track the ISS over the past few days while the

Hi Simon, Thanks so much for “personal” help. Really nice of you to take the time to do so; much appreciated. Here’s the screen shot re my Audio question from a short while ago. Hope

Simon Brown kirjoitti 1.1.2020 klo 20:27: Thanks, that did the trick, partly. PlutoSDR appears to the radio definitions list, but cliking it causes just "Nothing found, sorry!" popup message. However,

Thank Simon for update quickly your latest version with dll for pluto. Run well 73 HNY twenty twenty Eric

Happy New Year all: I upgraded to the latest version of SDR Console. I am still experiencing the spectrum display freezing when I tune the radio (K3) or change frequency within SDR Console. CPU