Close SDRC. Substitute files. Reopen SDRC. I bet SDRC reads once and remembers the file internally. {^_^}

Nope. {^_^}

So Bill, to be clear...... you can see CW decodes visible in the CW Skimmer waterfall display, but when you double click a decode in CW Skimmer, SDRC does not follow that input, and does not jump to

I have played with the WideBand noise blanker a LOT on 6 meters (meteor scatter, msk144). Here is what I have found: Don't bother with the noise blanker on the left hand side of the main display,

CW Skimmer equivalent. Looking at the other thread running at the moment I think many would wish for a Simon's version of CW skimmer that is built into SDRC. Like many I have used CW Skimmer at

Hello, How do I remove a good working mttopHF.csv folder from SDRC and replace it with a new custom .csv file I make? Using mttopHF.csv as a template. My new custom.csv file loads ok in markers, but

-- 73 de Bill / KG6NRV

New website is live: https://www.sdr-radio.com/new-website Using #duda - an amazing website builder. More to come over the next weeks. Simon Brown, G4ELI https://www.sdr-radio.com

😊 The site is now secure. I use duda.co which generates the SSL certificate when the site goes live, but it takes an hour or two. Simon Brown, G4ELI https://www.sdr-radio.com

Sorry abt the formatting above, I copied and pasted an email to Simon as he suggested firing this off to the group. :D

Hi group, loving the latest release! Just a quick question. In the case where several vrx are desired, would is it computationally possible to have the vrx stacked so they alone are rx'd and not an

Hi Simon Assume as an IT man you are aware of the free SSL self-installs (or install on request) available from nearly all hosts (all?) these days without the expense of a paid-for SSL certificate?

Hi Bill Yes, that is how it works for me unless I am missing something? I see the CW spot on CWS, double click it (or move up and down the spots using the keyboard "Arrow Up/Down" keys), and SDRC goes

Hey guys, I looked around and haven't seen any other posts about this, so I figured I'd ask. I don't seem to notice any difference when I engage the Noise Blanker. I have been moving the sliders

Hi, A new http://www.sdr-radio.com website is going live, for a few hours it will not be secure until the SSL certificate is generated. No need to complain please 😊 . Simon Brown,

As far as calibration, my meaning is that not only will the CWSkimmer frequency window display the correct frequency, but also that the decoded CW signals are positioned exactly at that frequency

Simon, Would it be possible to add a set of manual notch filters to SDR Console? Two would be great, each with variable width. Thanks for your consideration. -- Mike

Hi, Simon... Thanks for the quick response, but I am not running any server hardware/software. From the RF OUT on my FTdx-3000, the signal goes to a SDRPlay RSP1A, then to the computer where only

Hi Bob, I don't use ILG as I have no need for it. However.... from the website... SIZE: 74267 data sets with 87 data fields (503 wide) with separator fileds between

Hello, Is there an "easy" way to filter a downloaded (paid for) ILG database listing by Time rather than the downloaded by Freq. which I have already downloaded ? Should of course be readable by