When you say volume do you mean from your speakers? At the moment you are using vac so unless you select listen to this tick box your volume will be low. Thanks Steve m0zeh

I have not experienced that on my RSPdx. I typically keep it on AGC:Slow and that is where it is time after time after start-up. For my old laptop (I5, M520 @ 2.4GHz. + 8 GB

I should also add that when changing the settings on either the RF, or If gains turns off the AGC. Simon, I noticed that every time I shut down and restart SDR Console when using SDRPLAY RSPdx

Simon, I noticed that every time I shut down and restart SDR Console when using SDRPLAY RSPdx that the AGC has turned off. Everett N4CY

Has anyone experienced upon a large tuning frequency change SDR Console will hang up and need to be started? I didn't experience this on older builds and now wonder what the cause is. #limesdr

Yes, That was part of some DF code that was custom written. Will check this and make sure it’s removed. Simon Brown, G4ELI https://www.sdr-radio.com

Hello, I know version 2 is EOL, but in this last version there is this strange thing: When I remove the windows I do not need, like Rotor, record etc, now come back every restart. That wasn't with the

Hi Simon, I know how to switch it in v3, but can't you make it the same like in version 2? Then it's always on display and easier to switch (click)... That is so convenient :-) -- 73 Kees PA3KVE

Of course, as soon as I posted, I went back to the program and played around some more and finally saw the Enable button change color. Only to took me a few days to see it, Very curious. regards, Roy

Hi, folks. In the satellite program, when I click on the Enable Tracking button, I cannot see any obvious indication that Tracking is in fact enabled. I have to wait for a pass to start before I see

Hello, Although I set in main menu the stepsize to 5 khz in AM mode (tools*options*tuning*stepsize*am*5 khz) I still see in the Analyser 9.687.752 instead of 9.690 khz What am I doing wrong ? David

If anyone in interested I have a few LZ1AQ boards for sale for $15 for the amplifier and bias tee boards, which includes shipping. Please contact me off list at everettsharp@.... Everett

Thank you. Do the two AGCs have to be the same? What is the difference between the two? Regards-- Maurizio - I 0570/RM/SWL

I might try a 49:1 unun Vince. I carried out tests on my smaller 9-turn homebrew 9:1 unun and its response was virtually dead flat from 10KHz to 100MHz. Allan From:main@SDR-Radio.groups.io

Oh wow, Thank You so much in advance! 73, Jukka

OK, Added to my list: https://www.sdr-radio.com/newpage Simon Brown, G4ELI https://www.sdr-radio.com

Full size pictures are preferred. That said, I can read enough of that fuzzy to note you have two AGC loops running. This can produce odd effects depending on time constants. {^_^}

Simon, nothing wrong with it:) My use cases are related into automation of things. I have made some pieces of software which monitor the bands trying to evaluate some conclusions from the signals -

Jukka OH2BUA, I have a very similar need but instead of IQ recording I need to have it working for audio recording. Ideally, it should be working for more than one (active) receiver since my logging

Hi, I have a frequency tracking issue with omni rig and a FTDX101. I can set up omni rig , and control the radio through various applications. However when I use SDR console I have an issue that I