Yes but you might have to edit the regional bandplan because I dont think those frequencies are included. If you have problems contact me via the Log4OM forum 73 Terry G4POP

Hello to group i am having a problem with a frequency shift.Example I am setting on hf 3.978. The software as well as my hf radio will change on its on to 137.104.I then hit refresh on software it

I'm not sure.. I dont venture that high, those frequencies are for cooking with :-) ================================ Jim, Bournemouth, Dorset. IO90BR. Elad FDM-S2,

Sorry, screenshot on my previous message was incorrect

The frequency is 131.725 Mhz, for decoding i use KG-ACARS (i know, it's unusual and relatively little known software but working absolutely perfectly with SDR#)

Hi, Sorry to be late looking at this, been busy, essential website work. Please add a screenshot so I can see how the software is configured. If at all possible tell me the frequency and I’ll

I believe that the squelch needs further refinement. When receiving AСARS, with the squelch level set to 18-22 (or higher level), even with a strong signal, it works with a delay, does not have time

Thank you for your suggestion but is it possible to enter the downlink frequency of QO-100 satellite bacause i got errors when i try to enter so high frequency

Any logbook that can use a serial link to a radio.. here, good examples are LOG4OM (though proper locator support is lacking for now), Logger32 and VQLog. There are others.

Does anybody know how to add a logbook that is able to pick up all QSO data automatic from SDR Console so the operator adds manual only the call-sign and locator and saves log on an adif file format

I would just plug it in and run Zadig to get the driver installed, seems to me that its just a regular rtl2832 device

Thanks for the replies I will look at the swskeds@groups.io shortly. Yes it is a copy of another make, but it wasn't Nevada I'm told. I've phoned quite a few, but it's so old no one really interested.

Hi - you may know the strong (300kW) VLF time singal stations from Russia, Belarus and Kygyzstan. They follow a complex schedule of time/frquencies around 25 kHz. With the help of Simon's splendid

Jerry That was a modified RTL2831 DVB-T Dongle. At the time many programs would run it but I suspect your running into same issue many others have. The .dll has been updated and evidently doesn’t

Kevin, The Watson brand was owned by Waters & Stanton, now merged with Nevada. You could try contacting them as both were very hot on support. I suspect this was probably a clone of some other

Take a look at this GroupsIO Forum: swskeds@groups.io

Hi, Can anyone help me with what software or dll files I need to run the above block. It's quite an old little block, but not really had the time to play till now. Original software went with old

I have now successfully imported every frequency I have (with names) as 'Markers' (see attached screen shot) ... which I have to say was not a straightforward process. It took some time to do this;

Greetings All: The problem which caused my Server Busy and Please Wait messages has been determined to be an issue with OmniRig, however the solution remains elusive. Attached are a couple

Yes. Simon Brown, G4ELI https://www.sdr-radio.com