(Apparently this was stuck on your machine for several days....) So you are changing the tuned frequency for the radio and there is a pause while you are tuning the radio. This is mildly ambiguous to

Out of interest, what happens if you set default to the headphone output? (Then replay the recording through the speaker obviously). Max

not needed ... the "real" development is done in the test team group and we already have it "in focus" :-) greetz sigi dg9bfc Am 01.04.2020 um 17:41 schrieb Joe Puma:

Replying to bring this post back into focus. Joe

Hi Mark, You need to click where the 3 ticks are on the menu at the top... circled in the pic I attached. At the moment you have the showing of markers disabled.

Also checked if it was a problem with the test version 3.0.22 - but the released 3.0.20 version has the same problem. I have the VB-Cable, A/B, C/D, and VoiceMeeter Banana installed, but I weren't

I never had anything else than the speakers set as default.

Hi Wojciech I think I found your problem. I did a few tests and found that SDRC will not record any audio on the video recording unless default audio playback device in Windows is set to (in my case)

The answer lies in your attachment. Good grief. Mark G0MGX

Attached for info. Mark G0MGX

Hard to see the images when embedded in the text (too small). If you attach them, we can easily see them: Appear to work in V3.0.22 (beta ver) and a few previous versions. What is your current version

Hi Gang Did anyone find a solution for this issue? I lost my markers some time ago and can't get the back. Some screenshots for your entertainment:

I have an i7 3.4Ghz with an Nvidia GPU and 16Gb of ram and it locks/stutters/lags when I'm running 2 VFOs, VAC, WSJT-X and GridTracker. It's not my power settings, it's not thermal throttling, it's

Nick, have you reinstalled the API (SDRplay_RSP_API-Windows-3.06.exe) or the ExtIO (SDRplay_ExtIO_RSPdx_Installer_1.0.exe). I have had zero problems now that I am now using a faster pc

Can SDRConsole pause sound recording with squelch triggers and start then again.

Just a shot in the dark, but have you checked your Power settings under Windows Settings? Screen Save to NEVER (Mine set to 5 minutes and not a issue with freeze ups) Sleep Mode to NEVER while plugged

Hi all I have an issue with the SDR V3 changing frequencies . This morning NOAA it was decoding NOAA 18 perfectly using WXTOIMG. After a while NOAA 19 made an appearance and the program insisted

Hi, try to slide on the very bottom of the waterfall the "span"-window to left or right: SDRC should then lock to the new ppm corrected value. Best Regards, Mark, DB1BMN

Hello, I have been having problems with this fantastic software doing a stand still or "freezing up" after about 3 or 4 minutes of inactiviity in the program. This has been happening for some time,

:( Thanks for the reply.