Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE Version .........: OpenCL 1.2 CUDA 11.0.140 Name ............: NVIDIA CUDA Vendor

Num platforms = 1 Platform index 0 Profile .....: FULL_PROFILE Version .....: OpenCL 1.2 CUDA 11.0.197 Name ........: NVIDIA CUDA Vendor ......: NVIDIA Corporation Extensions ..: Device

I bet if Radeon is easy it might also be easy to leverage the Intel OpenCL as well, especially if it is not being used for a display. {^_^}

Hi, Thanks – am working on this now, also many thanks for the donation. Simon Brown, G4ELI https://www.sdr-radio.com

Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE Version .........: OpenCL 2.1 AMD-APP (3004.8) Name ............: AMD Accelerated Parallel Processing Vendor

Hi Simon, I am using SDRC V. 3.0.23 with my 7000dle. I can not find the menu to set the transmit calibration. With drive set at 23 I get 100 watts out. Also I have a window in the waterfall section

Latest test results here, much more data. Nothing further, as I see progress has been reported. Num platforms = 1 -   Platform index ..: 0   Profile .........: FULL_PROFILE   Version .........:

Hi, here's my results with the updated test on an HP laptop I use for portable listening ops. The home station is an Intel/Nvidia machine and somewhat overpowered, so not of relevant interest for

Hi Simon, my slightly older laptop (i5, Win10 Pro) has an AMD Radeon 6600M / 6700M series graphics card. Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE

There’s some nice hardware out there 😊 . Simon Brown, G4ELI https://www.sdr-radio.com

Results test 5 Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE Version .........: OpenCL 2.0 AMD-APP (1800.5) Name ............:AMD Accelerated Parallel Processing

Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE Version .........: OpenCL 2.1 AMD-APP (3075.12) Name ............: AMD Accelerated Parallel Processing Vendor

Hi all, As of recently I am having a small issue with SDRC. It is running fine, using 2 vfo’s (one for FT8 with virtual cable, one for USB speech). And then all of a sudden the program

Good. The programming side will be easy, when ready I’ll grab a few AMD GPU owners and invite you to the test team. Simon Brown, G4ELI https://www.sdr-radio.com

Pefect. Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE Version .........: OpenCL 2.1 AMD-APP (3075.12) Name ............: AMD Accelerated Parallel Processing Vendor

{ CLINFO_BOTH, DINFO(CL_DEVICE_BOARD_NAME_AMD, "Device Board Name (AMD)", str), dev_has_amd } -- Nathan

Thanks, Typo ☹. Try this please: https://www.dropbox.com/s/gemd8pykxd4bwe1/FFT-Test-005.zip?dl=0 Simon Brown, G4ELI https://www.sdr-radio.com

We do know it's accessible though as just checked my previous message and clinfo shows: Device Board Name (AMD) Radeon RX 590 Series -- Nathan

Sadly not... Num platforms = 1 - Platform index ..: 0 Profile .........: FULL_PROFILE Version .........: OpenCL 2.1 AMD-APP (3075.12) Name ............: AMD Accelerated Parallel Processing

Hi, Run this please, should show the board name (AMD only). https://www.dropbox.com/s/4g88aok0xmm3xts/FFT-Test-004.zip?dl=0 Simon Brown, G4ELI https://www.sdr-radio.com