Hello Kevin, I see you have some Windows update pending, please install and reboot. I also see the output channel and the input channel sampling rates of your C cable are different, and do not match

Just for information VB-Cable or VAC are not needed with the Intel NUC if the Realtek audio driver is installed from the Intel NUC driver download website. With my 5th generation NUC the Realtek

After a few more hours of trying to figure it out, playing with VBCable Control Panel settings and such, it seems that SDR-Console is passing the audio to ATCSMon. Although its not able to decode it

I was able to track down the noise problem. I drive the HackRF receiver from a GPS locked 10 MHz clock in my shack. It turns out that for 'some reason' the RS-485 control signals to and from the

The first thing you'll find when writing your first computer code, is to print "Hello world" on the screen. And, out of 50 students, you'll find 50 different ways to do it. The same

Tools... Options.. Identities. Each identity has separate user files and you can use 2 different identities concurrently. ================================ Need help with

Hello Kevin122, I use Banana and VBAudiocables A/B/C/D. I do not have any issue routing SDRC to VBCable A input and use VBCable A output as one of the virtual Banana's input. Any audio device I'm

I want to run two copies of SDR-Console, one connected to an Airspy HF+ Discovery and the other to an Elad FDM-S2. (Eventual plans are to use two Airspys when on the road.) I tried running two

Hi George To carry on from our other conversation in another message on here regarding on VB-Audio and VACs. I just had a quick stab around. For pager decoding did you look at Multimon-ng. Seems to

Hi George I'm no expert by any means, but I will try and take a look when I get a few minutes spare. Just to be clear, Kevin is the only other person I heard of on here except myself as having an

Hi Max, If you have time, can you take a look at two message threads I posted on the SDRuno RSP group.io in the last few days. They concern issues with the pager decoding program PDW and VAC and

Hi Kevin Sorry to say I never did get to the bottom of this issue. I use other VB-Audio products, like the excellent various versions of Voicemeeter Banana etc for routing audio into SDRC for TX, but

Anyone find a solution to this issue yet? I got new Lenovo laptop and VBCable does not seen to be passing audio from SDR-Console. Although it does work with SDR#. -Kevin

Cat 7 cable offers extensive shielding for reduced attenuation. ... Category 8 cables require shielded cabling. Unlike Cat5e to Cat6A, it does not come with an unshielded twisted

Hopefully, the WR-G33DDC will be supported, too. Gruß Uwe

Hi James I have used USB isolators on my USB lines from my IC-R8600 to PC. I was also trying to track down a noise issue. I used some inline isolators that I found on eBay with limited success. I

I suspect you're right about a ground loop Jim If your motor uses a ground wire some motor current will leak into other ground connections. Ideally use completely separate isolated plus and minus

(Authoritarian male announcer's voice) We're up to CAT-632 now, boy. The outer most shield and every 6th on the way in is superconducting. {O,o} Break the loops.

On 20210129 17:40:18, doug wrote: Doug, build that topology in your head. Is there a ground-loop in it? What are the possible consequences? hint - there is no easy solution. This

We are up to cat 7&8 now, more shielding. Bob - wd6dod