It would be prudent when these problems are encountered to do the most basic troubleshooting. Can you hear *ANY* audio out of SDR-Console from a known good source (NOAA weather transmitter in the

That's OK. Just about everyone started with the RTL-SDR dongle. Basically, it has about a usable bandwidth of 2.5MHz (or slightly wider). As long as you stay with that bandwidth, you're

Ah, https://www.notebookcheck.net/Acer-Extensa-5620Z.7704.0.html Intel Pentium Dual Core T2330 (Intel Pentium Dual Core). This really isn't enough CPU, I'm guessing it's getting too warm. Simon

OK, What happens - does the laptop close down of does SDR Console crash? Simon Brown, G4ELI https://www.sdr-radio.com

How much memory? What is the processor? a Celeron will struggle much more than a later generation i7. ================================ Need help with SDR Console? If you

I sometimes use a a virtual audio cable to decode the Itty and mute the sound to the speaker and read the decodes another time. With the sound muted and using a vac, you can still do other things with

I am afraid that I am new to SDR's and SDR Console, I have RTL-SDR.COM V3 SDR's. I am still trying to figure these things out.

The radios are a sdrplay rsp1 and a rsp1a machine is a acer 5620z full featured. What else is there .

Your SDR must have the overall bandwidth to support this 8 MHz spread. My RSP1A has up to 10 MHz, but if what you're using is less than 8MHz, this cannot be done.

Is there a way to open the frequency range? I need to have the range from 453.xxx to 461.xxx, currently, if I have a couple of receivers setup in the 453.xxx range and try to add receivers in the

Just tried your settings and they worked perfectly. Now I have a much better idea of what to look for. Time to start signal hunting. Many thanks for your help.

I have a TM-2 for sale. If interested please email me off list at wb4yal@...

Dave, What goes off – the software or laptop. If the laptop – is it overheating? As Jim writes, more info about your laptop is needed. Simon Brown, G4ELI https://www.sdr-radio.com

So, When it’s frozen take a screenshot https://www.businessinsider.com/how-to-screenshot-on-windows?r=US&IR=T please. Show info about your computer – what’s the CPU? Simon Brown,

Hi, As always – time. I can’t do everything… Simon Brown, G4ELI https://www.sdr-radio.com

Woodbox closed a while ago, I think they opened a bar or similar… Simon Brown, G4ELI https://www.sdr-radio.com

Simon, Many thanks.. No wonder I couldn't get a 'hit'.. I kept searching for "Woodbox T-Mate 2" but it's "ELAD TM2" !! Duh! Dave KK7SS

maybe your cpu is sometimes cranking up the clock speed a bit (and then cpu usage shown is lower) have you switched the "priority" one step up (in general settings there is a checkbox

From: Glenn Blum I heard of this issue from other groups. ================================================ Unfortunately the great majority for whom the upgrade went without issues tend not to post

I heard of this issue from other groups. Sent from Mail for Windows 10