Hello, I have just tested the free version for Android and the "Scroll Wheel" remote works very good controlling the VFO. No need to connect an external VFO knob. Is anyone using Unified Remote for

Hi Kriss This scan is from our Hotpoint washingmachine in standby which plays musical notes on a portable radio. Not the usualmush. The scan in green is the washing machine, 4MHzplus minus

Max, I cured mine with an FT-240-31 Ferrite Toroid and an improved AC line filter, all of which I installed inside the washer. My first SDR antenna (EFW) was overhead the washer by about 25'. Mine had

And generate your own wave energy… Max, you could volunteer to do the washing - 100%-RFI-free :- On 26/09/2021 10:02, Max wrote: Eventually track it down. It's our own washing machine.

HI Simon Learned about the new API? If it helps, I did a quick test on a Probook6560b PC with I5 and 16MB ram ... It's not a performing PC but it should be more than enough to handle SDRplay. I

On Sun, Sep 26, 2021 at 11:35 AM, Michael.2E0IHW wrote: Max, you could volunteer to do the washing - 100%-RFI-free :-Don't worry, I am the modern man...... do my full share of the domestic tasks! Max

Max, you could volunteer to do the washing - 100%-RFI-free :- On 26/09/2021 10:02, Max wrote: Eventually track it down. It's our own washing machine. ...Makes

Yes, I do have a unit. Simon Brown, G4ELI https://www.sdr-radio.com

‘Maybe’ Simon Brown, G4ELI https://www.sdr-radio.com

Simon One feature that would be great to add for HL2 in addition to the clocks, although I imagine it's not trivial, is to be able to use the multiple receiver option in the HL2 Gateware. Standard

On Sat, Sep 25, 2021 at 01:34 PM, Allan Isaacs wrote: I fixed this and then noticed a black cable running from his BT router along the skirting board.. and it went to a mains ethernet adaptor with a

There is also a qrn eliminator on AliExpress at around 40eu I used the mfj1025 ANC but it's range is too small spectrum wise.You need to fine tune at every 40 khz steps

On Sun, Sep 26, 2021 at 05:53 AM, Simon Brown wrote: HL2 Run not happening ☹That is very sad news and gutting for those who have ordered. At least you've got one already I think Simon? The world

All working now Simon thank you. The culprit was Spybot-S&D stopping being forwarded to your web pages. Replaced memory with new one and now working OK.

On Sun, Sep 26, 2021 at 05:44 AM, Simon Brown wrote: So how do I disable the high-power SMA (RF2 ?) during receive so that I only use RF3 (the one you added)?RF3 is just a direct connection to the RX

Hi, Home, Support etc. open a URL, I can only imagine that you have Aunty Virus blocking this. Memories appear to be working here, try editing a memory to see what the definition is. Simon Brown,

With regard to V3.1. selecting the buttons on the ribbon bar ie Home, Support. Check for updates, has no effect. Also when selecting a memory does not take you to the correct frequency, for example,

HL2 Run not happening ☹ Simon Brown, G4ELI https://www.sdr-radio.com

Indeed. I do expect a replacement though, also there are other projects in the works for VHF / UHF / SHF. Simon Brown, G4ELI https://www.sdr-radio.com

So how do I disable the high-power SMA (RF2 ?) during receive so that I only use RF3 (the one you added)? Simon Brown, G4ELI https://www.sdr-radio.com