I have made a virtual VFO controller. Please feel free to download from: https://github.com/LarsThunberg/SDR-Console-VFO-Remote //Lars SM0TGU

Hi Simon, I did say my RSPdx opened @ 10MHz but not my RSP1A which only works at 8MHz. I was only adding a comment to the thread, I didn't mean to confuse more. John

Mark, I'm using IC-705 as TX with SDR-Console (Airspy as SDR) and do not have any problem with doppler correction. It is rock solid and I have used FT4 on satellites with high doppler without any

John, The SDRplay software structure is such that it may well be independent of the radio. There’s a service which runs in the background and connects to the radios, the API talks to this

Just out of interest I tried this on my RSP1A and got the same problem. Opens @ 8MHz but doesn't work if selecting 10MHz. I then tried this on my RSPdx which opened @ 10MHz with no problem. Not sure

I'll sell mine .... barley used ...

FWIW, here in Canada, I have opened up switching supplies and found spots on the circuit board where components were missing. I've long suspected that these may have been filter components which

I have made an AutoHotKey script that actually solves this problem. I will write a short post about this shortly and publish the script on AMSAT-SM website. //Lars SM0TGU

Hello, I have just tested the free version for Android and the "Scroll Wheel" remote works very good controlling the VFO. No need to connect an external VFO knob. Is anyone using Unified Remote for

Hi Kriss This scan is from our Hotpoint washingmachine in standby which plays musical notes on a portable radio. Not the usualmush. The scan in green is the washing machine, 4MHzplus minus

Max, I cured mine with an FT-240-31 Ferrite Toroid and an improved AC line filter, all of which I installed inside the washer. My first SDR antenna (EFW) was overhead the washer by about 25'. Mine had

And generate your own wave energy… Max, you could volunteer to do the washing - 100%-RFI-free :- On 26/09/2021 10:02, Max wrote: Eventually track it down. It's our own washing machine.

HI Simon Learned about the new API? If it helps, I did a quick test on a Probook6560b PC with I5 and 16MB ram ... It's not a performing PC but it should be more than enough to handle SDRplay. I

On Sun, Sep 26, 2021 at 11:35 AM, Michael.2E0IHW wrote: Max, you could volunteer to do the washing - 100%-RFI-free :-Don't worry, I am the modern man...... do my full share of the domestic tasks! Max

Max, you could volunteer to do the washing - 100%-RFI-free :- On 26/09/2021 10:02, Max wrote: Eventually track it down. It's our own washing machine. ...Makes

Yes, I do have a unit. Simon Brown, G4ELI https://www.sdr-radio.com

‘Maybe’ Simon Brown, G4ELI https://www.sdr-radio.com

Simon One feature that would be great to add for HL2 in addition to the clocks, although I imagine it's not trivial, is to be able to use the multiple receiver option in the HL2 Gateware. Standard

On Sat, Sep 25, 2021 at 01:34 PM, Allan Isaacs wrote: I fixed this and then noticed a black cable running from his BT router along the skirting board.. and it went to a mains ethernet adaptor with a

There is also a qrn eliminator on AliExpress at around 40eu I used the mfj1025 ANC but it's range is too small spectrum wise.You need to fine tune at every 40 khz steps