The bug that I found in b550 is still there in b554. When tuning via the "arrow up" key on the PC keyboard, i.e going *upwards* in frequecy from the low side of the fixed bandwidht - the frequency

As a cw fan I second this sentiment. Here I have plenty of upstream bandwidth so it's not an issue to me if a remote user wants to use 8192 (or larger ) What I am not so clear on is does the end

Simon, Any chance in the next build to get the Velleman option working for local use ? Its a real PITA having to run the test program that comes with the board just so I can switch antennas

Hi B544 seems to be working better but still a slight bug.8 Unless I'm missing something when I try to center The frequency I click on, it centers to the right Almost off screen. Previous versions

I have the following bug in b550 (maybe fixed already. I tried b533, but uninstalled... The bug: When frequency stepping via *arrow-up key*, frequency automatically goes back to a much lower

Hi Simon, every found bug that can improve your program, is not embarrassing, at all ;-) I'm eager to start debug some server functions as soon my SDR-IQ will arrive from Wimo in the next days! Keep

Hi, I need to spend some time (whatever that is) and work out algorithm so the Server Owner can allocate a specific bandwidth to the server. This I will do, but it’s (again) User Guide

http://www.ham-radio.ch/kits/sdr-radio.com/Beta/SDR-RADIO_v1.1b554.exe Fixes some very embarrassing bugs L Simon HB9DRV http://sdr-radio.com

It *was* nice for zoomed in CW/NDB DX... 73 Paul PD0PSB

Not sure where to report potential bugs. Noted that opening program options and Softrock tab will cause the VFO to subsequently stop updating a change in frequency. VFO therefore stays locked on

Hi Simon, I actually tried your NETSDR server, It's the power supply delivered by default with your 1530? I noticed a very big QRM on VLF Band. I have exactly the same stuff on my ALA100 and PS

Hi, FWIW my NetSDR is now online as well. Pieter’s bandwidth is not really high enough for 4096. I removed 8192 – not really needed, must work out the logic here... Simon

Hi, Any chance of a crash dump? http://www.sdr-radio.com/Support/CrashesLockupsMore/tabid/351/language/en-GB/Default.aspx Simon HB9DRV http://sdr-radio.com

I'm running sdr-iq with 553 on Win 7 and it runs fine. No crashes

Hi all I have a sdr-radio v1.1B553 that crashes on my win7 i had also the previous verision that worked for about a day. After that all crashes ?! Any idea why ? Could it be my win 7

I am logged into your SDR-IP using 400 kHz bandwidth (however it could be any setting). If I change the bandwidth and restart the console, the frequency or spectrum display and the audio do not match

Pieter's NetSDR now working good. 2MHz in the lower window, 20kHz in the upper. Whoah, looks promising. Pieter please put server in 4096! (but where did fft8192 go in b553????) 73 Paul PD0PSB

Fluttery sound seems to be fixed AGC spike rejection? Works quite good, but on/off switch? 73 Paul PD0PSB

Ge, just playing with the b553 revision. Whereever I am clicking it works .... fine, but two bugs still. 1) NR1 . If switch ON the audio disappears, OFF still no audio, have to restart the console,

I can connect to both your servers, was listening to the religious programs on MW. Simon HB9DRV http://sdr-radio.com From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of RFSPACE