V3.1 beta updated, an important fatal crash has been found - finally! https://forum.sdr-radio.com:4499/viewtopic.php?p=7861#p7861 Simon Brown, G4ELI https://www.sdr-radio.com -- - + - +

Hi Michel Yes, I agree. I just watched the W8BYA video and you cansee the SDR Play can be set up to indicate precise signal levels by trial anderror and of course within realistic limits. My

Update on my setup: I now use a low noise DC-DC convertor by SV1AFN to power the pluto. I need 12V for other parts of the setup, so by using this convertor I only need 1 supply voltage. Pluto is

Hi Allan, Test setup RF generator on 15 MHz, output level set to 13 dBm or 1Vrms : - ~ 6 Vcc measured (2.1 V rms) on my Tek 454 scope in case of direct connexion - ~ 3 Vcc measured (1.05 V rms) on the

pse see below: https://www.youtube.com/watch?v=qHJE6wa9dVw Gedas, W8BYA EN70JTGallery at http://w8bya.comLight travels faster than sound....This is why some people appear bright until you

Hi Michael There may be a problem here? It depends on how the output from yoursignal generator is measured. Some will regulate the input into the generatorsattenuator to say 0dBm then rely on the

Michel, First, I suggest you turn AGC OFF to get anywhere near an accurate reading. Larry K4LED

Hi folks, I performed a simple test with my RSP2 receiver and my Marconi 2022D RF generator: The RF signal was fed to SMA antenna port A via a short 50 ohms coax cable. The Console settings were as

Thanks I'll try your suggestion

Many thanks for the replies to my query..I'll have a ho at some of the suggestions..thanks

Im running build 1470 with api 3.09 no problem with sdr duo Robin Sent from Mail for Windows

I’m wondering about USB power. Simon Brown, G4ELI https://www.sdr-radio.com

Steve, I figured I would try upgrading the SRDplay software on my system to see if it made any difference. As you can see in the attached log I now have API ver 3.09. But Console is still working OK.

Attached is my log file for the RSPduo. Two things I see that may be an issue. I have API ver 3.08, you are using 3.09 and it shows the local version is 3.06. I think Simon has said 3.09 will work but

I think those errors are OK. Just not getting data … Simon Brown, G4ELI https://www.sdr-radio.com

Hi, Thanks for posting here and adding the logfile. I’ll look at it this evening. Simon Brown, G4ELI https://www.sdr-radio.com

First, open SDRC all the way so we can see all the data provided, it's not full screen by looking at the box in upper right. There's a whole lot of data along the bottom that's missing. Best to use

Hi I cant get console to run even though its loading ok. I also use sdruno which seems fine. Console is seeing the sdrplay as a definition but wont run it. Any help greatly appreciated thanks..

On Sun, Jan 23, 2022 at 09:16 AM, Roberto Taberna wrote: It was so simple! Thank you so much, Max 😊NP Roberto. Glad it helped. 73 Max

It was so simple! Thank you so much, Max 😊 Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>Per conto di Max Inviato: sabato 22 gennaio 2022 20:55 A: