Hi Conrad. Thanks for your comments. I suspected that going from 14 to 16 bit would not make a huge improvement. Have you placed an order on the Hermes board from Apache Labs for being used with a

Hi, I expect it does but I just ordered one anyway as I will run two SDRs on VHF at the same time ( 4m and 2m/70cms) and it’s a waste to tie up 2 x ELAD FDM DUO. As for performance – it

Agreed, ENOB & BDR will be similar, more important is ADC linearity. Anyway, just ordered a Hermes card for $389 – that’s a *very* good price. So I guarantee support! Simon Brown,

Hello Ingolf. I had an ANAN-10E and the receiver was very good, later on I bought an ANAN-100D which I believe was a 16 bit ADC. The summer Es season on 6m is quite punishing and I found the

https://www.sdr-radio.com/server Simon Brown, G4ELI https://www.sdr-radio.com

Right version of SDR Console ? I have tying for quite a lon time to install the bandplan on a wrong version ... 73, Michel (F1GOC)

HI, Thanks all for your answers I realize that my question was poorly worded (I'm French, nobody's perfect ;-)): I was wondering what the difference was in terms of receiving performance (sensitivity,

Greetings, I am looking for detailed instructions to add my receiver to the list of servers. I have also checked YouTube but only find how to access radios already on the list. I would appreciate

Thanks Mark. Simon, if you read this; Does SDRC support the Hermes board that Apache Labs (ANAN) is producing and

What have you tried? Ribbon bar, View, Spectrum, Band plan, Database, Select. Simon Brown, G4ELI https://www.sdr-radio.com

I have tried to import all three files, but without success. What is the procedure? Thanks!! Fernando Enviado desde Correo para Windows De: Max Enviado: miércoles, 16 de febrero de 2022

There's one similar to mine here: https://sdr-radio.groups.io/g/main/files/Version3ServerHelpFiles/SDRConsoleV3-ServerGuide2.pdf Start on slide/page 17 for setting up your own server. It's time I

Ingolf, Simon's website (at https://www.sdr-radio.com/anan-firmware) states: "The OpenHPSDR Ethernet Protocol (aka protocol II) is the only protocol which will be supported for ANAN transceivers. This

On Wed, Feb 16, 2022 at 09:28 PM, <hb9bhu@...> wrote: Yes Max, I followed that page. I attached the screenshot with the home tab.Try disabling Auto Mute and/or Noise blanker Max

Yes Max, I followed that page. I attached the screenshot with the home tab.

On Wed, Feb 16, 2022 at 07:05 PM, Simon Brown wrote: Ham Radio Bandplan for SDR# - SZ1A Designed for SDR# but can be imported into SDR Console.Works very well. Thanks for the tip Simon. I've

Hi, Ham Radio Bandplan for SDR# - SZ1A Designed for SDR# but can be imported into SDR Console. Simon Brown, G4ELI https://www.sdr-radio.com -- - + - + - Please use

Opss ... I meant Ravi

I'm waiting on a response from Seri regarding mine

I found this thread two years later and all the images are missing. Would it be possible to resurrect them?