Hi, This year I must add remote TRX support. There will be some restrictions, for example the exact same DLL at the client and server, I can use checksums to ensure this. Maybe I will start after

Hi, Good that it’s working. Easy to blame the software, but this time it was the hardware 😊 . Simon Brown, G4ELI https://www.sdr-radio.com

I had the same idea as Pez, I bought a FDM-DUO due to the wrong information that SDR-Radio ist supporting FDM-DUO with remote RX/TX :-( My final goal is to remotely operate my microwave transverters

I had the newest firmware loaded. Same irmware worked fine with another FDM-DUO. Finally I got help from Elad. After a 30 minutes TeamViewer sessiom they rewrote the whole firmware again and fixed

Nor did mine. I tried to tell T'bird to use a constant width font. But by the time it made it back here the font stuff was stripped. Ah well. SDRC -> Virtual Audio Cable |->FLdigi

Your hookups did not translate very well, probably due to formatting issues. Did you mean something like: SDRC -> Virtual Audio Cable |->FLdigi

That one line is probably the reason you have few if any problems. {^_^} On 20220307 05:43:27, K3EUI Barry wrote:

I bought the DX Engineering RG5000 a few years ago. It created significant IMD products with the strongest input signals measuring -15 and -13 dbm. Even after a passive 8 way coupler (-10.5 db

The Receiver Front End Protector that I, the OP, is primarily for nearby RF energy from a TXR, not for lightning protection. I emailed Array Solutions and asked about when they will stock them. The

Back in the 1950's I used NE-2 neon lamps until a direct strike made them disappear along with the lead in wire and the solid ground lead. Hard to stop 20,000 A/microsecond rise times. Here is what

On Mon, Mar 7, 2022 at 01:43 PM, K3EUI Barry wrote: I’ve thought about how to get the audio output of SDR Console (3) to the FLDIGI input.Barry, that's all great if it works for you and you

That sounds like you have multiple audio paths from SDRC to FLDIGI.How are you routing audio from SDRC to FLdigi and what are your audio settings in all programs and windows? Like Simon says... Screen

I believe a virtual audio cable is much better suited for this. Routing all audio output to the VAC allows multiple applications to "listen" to the audio at the same time.  Audacity and fldigi are

I use an SDRplay (RSPduo) with an HF antenna and have no trouble decoding any of the digital modes on HF SSB. I’ve thought about how to get the audio output of SDR Console (3) to the FLDIGI

Bruce, For goodness sake – attach a screenshot on Console! Simon Brown, G4ELI https://www.sdr-radio.com

I was using Fldigi to decode the RTTY transmissions from a recent contest weekend and discovered that the decoding was better with the audio out of Console DISABLED! I am using the latest V3.1 beta

On 20220306 14:59:35, Roger Need via groups.io wrote: For a given current through the diode the voltage across the diode will be smaller. Or said another way the Schottky diode

The Schottkty diodes will produce higher levesls of IM products with lower level signals. That is to say Schottky is nice for fast and robust but bad for IMD. That is why some

On Sun, Mar 6, 2022 at 12:10 PM, jdow wrote: On 20220306 06:54:51, Radioman ZeroZero wrote:See this post on another thread. https://sdr-radio.groups.io/g/main/message/62120 -- Those diodes will

Hi Joanne. Sorry for being ignorant and / or not having the american language as an mother tongue. Do you mean that the Schottky diodes will produce lower (less) IM-levels than the epitaxial diodes at