Hi, Please add a screenshot so we can see this! Simon Brown, G4ELI https://www.sdr-radio.com

Hi Dennis. I've followed all the steps you said, but the problem remains exactly as before. I can see the "waves" moving on the screen, I hear only noise and, clicking on

Alan and Max - Thank you for your informative replies. I started looking into this just recently after buying an RSP1A. At first I was using SDRuno and found I could get Skimmer to decode over

Hi, Sounds like a driver. My notes are here: https://www.sdr-radio.com/icom-r8600 . Simon Brown, G4ELI https://www.sdr-radio.com

Hello, Have a new Icom R8600, and admittedly it's going to take me a while to understand all of its controls and nuances. But, would like to use it with Console, which I understand is quite O.K. Have

There is no conflict between the software. I will suggest to you the same I have told others. Adding or upgrading SDRPlay software can cause issues. This happened to me me so it could happen to you.

Hi Kriss. I hear audio, but not the stations. Until now I used the software SDRplay for my RSP and everything worked fine. Is there any conflict between the two

On Fri, Mar 11, 2022 at 12:14 PM, Dick Williams wrote: I used a 48 kHz sample rate in my first attempts. The results there were promising until I looked at Skimmer's Bandscope window. It showed a

Dick, No, something Skimmer was not designed to do. It only does 192ksps with certain SDRs and only on it's own. 73 Alan G4ZFQ

Fabio, Is the DSP panel visible? The DSP panel has frequency, audio output selection, volume, mode, filters, etc. Click on the Receive tab (#1), the DSP (#2), then choose the output device and

My objective is to generate DX Cluster style spots for CW stations heard between 50.000 and 50.125 mHz. I'm trying to do this using Console to feed IQ data to CW Skimmer as described in

Many thanks for your reply Max.. I've downloaded and installed SDR Console V3, but it's not OK. I used, for the installation, the tool Select Identity ( the screen

On Thu, Mar 10, 2022 at 05:01 PM, <ffiorin@...> wrote: So I have decided to use SDR console V.3, which seems easier to use. Quite right Fabio, you came to the right place! 1) Go to

Hallo to all the memnbers of this group.. I hope that someone can give me the right suggestions for my problems.. I own a RSP receiver (dx) which I use with the

You passed the test, congratulations...And welcome!

welcome ;-) Am 09.03.2022 um 11:35 schrieb ffiorin via groups.io:

Hi. I would like to join this group

Urg, Now I start the design I see it’s a lot more difficult than I thought ☹ . Will spend a day or so working out how it can be implemented. Simon Brown, G4ELI https://www.sdr-radio.com

Well, I’ve been thinking about the main problems and now have these resolved, so it’s really just a question of the programming. Simon Brown, G4ELI https://www.sdr-radio.com

Hi Simon, that sounds very exciting! Can’t wait… Kind regards Matthias www.dd1us.de Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>Im Auftrag von Simon Brown via