Yep… and there is also a gibibyte and a tebibyte… who thinks of these things ??? 😊 Dewey

Click on Mebibyte and it takes you to https://en.wikipedia.org/wiki/Mebibyte . Simon Brown, G4ELI https://www.sdr-radio.com

Well then I stand corrected! I have seen no reference to Mebibyte before. Regards, Dave Aichelman N7NZH Grants Pass, Oregon

1 Mebibyte (MiB) equals 220 or 1,048,576 bytes. 1 Megabyte (MB) usually refers to 106 bytes (1,000,000) bytes. So I seriously doubt this is misspelled by Simon.

Siegfried - Not familiar with the PLUTO radio but it seems it plug's into a USB port. If RTL_test does no work, then a backup maybe learn how to run WINDOWS MUTT to see if

Simon! Horror of Horrors! The word Megabyte is misspelled as Mebibyte in the panel listed above. I am sure that is causing some obscure problem in SDR Console. HaHa! Regards, Dave Aichelman N7NZH

how can rtl test help with a pluto?!? pluto is not an rtl dongle! dg9bfc sigi Am 09.01.2022 um 15:44 schrieb John:

in most times replacing the cable helps a lot cause in the cable is the "flexible" (worn out) part of the usb connector dg9bfc sigi Am 09.01.2022 um 16:18 schrieb Roy VE7DH:

You have to run the server application to get your SDR’s online to act as a server. I wouldn’t recommend running the app unless you really want to put them online. Once you run the app once (just

It’s all in most very old post here: https://sdr-radio.groups.io/g/main/message/51635 You may have slightly different screens due to already having your ‘local’ SDR definitions built. As the

Douglas, the usb connectors on the Pluto are not of the highest quality and if you do enough connecting/disconnecting you will find they start to fail. It is a very good idea to always have the

Hello, Thought it was about time I learned something about Servers, so have started trying to learn about accessing a remote radio in other parts of the world via Console. Really sounds

Doug - I assuming you are plugging your pluto SDR into the computer and have tried various ports. Get a copy of rtl_test.exe on your computer, and install it some where convenient.

When the Pluto is connected to the PC, it's using only the host PC's USB port for communications/power. When I try to use my Ethernet USB dongle, I have an external 5vdc power supply connected into

USB power? Are you using both USB connectors on each device? Using a good, powered hub? https://www.sdr-radio.com/usb Simon Brown, G4ELI https://www.sdr-radio.com

I have a pair of Pluto SDR's and they both are acting up on me. They randomly connect/disconnect from the host PC. Additionally, when I attempt to connect to them via ethernet, they often go offline

OK, Thanks. Simon Brown, G4ELI https://www.sdr-radio.com

Hi Simon, I have two use cases for Remote operation: 1 - From one building to another (Shack to House) via Ethernet LAN with very low latency (Fortinet equipment). 50 meters maximum. I also have a

Hi, How far away is the DUO from the shack? With remote TX there are ‘interesting’ latency issues. Do you have remote antenna switching? Simon Brown, G4ELI https://www.sdr-radio.com

Hi Simon, Thanks for the info. OK I understand. If you get underway with DUO support please let me know, Remote Operation is my main use for SDRC - I would be more than happy to help beta test if