Hi folks, I performed a simple test with my RSP2 receiver and my Marconi 2022D RF generator: The RF signal was fed to SMA antenna port A via a short 50 ohms coax cable. The Console settings were as

Thanks I'll try your suggestion

Many thanks for the replies to my query..I'll have a ho at some of the suggestions..thanks

Im running build 1470 with api 3.09 no problem with sdr duo Robin Sent from Mail for Windows

I’m wondering about USB power. Simon Brown, G4ELI https://www.sdr-radio.com

Steve, I figured I would try upgrading the SRDplay software on my system to see if it made any difference. As you can see in the attached log I now have API ver 3.09. But Console is still working OK.

Attached is my log file for the RSPduo. Two things I see that may be an issue. I have API ver 3.08, you are using 3.09 and it shows the local version is 3.06. I think Simon has said 3.09 will work but

I think those errors are OK. Just not getting data … Simon Brown, G4ELI https://www.sdr-radio.com

Hi, Thanks for posting here and adding the logfile. I’ll look at it this evening. Simon Brown, G4ELI https://www.sdr-radio.com

First, open SDRC all the way so we can see all the data provided, it's not full screen by looking at the box in upper right. There's a whole lot of data along the bottom that's missing. Best to use

Hi I cant get console to run even though its loading ok. I also use sdruno which seems fine. Console is seeing the sdrplay as a definition but wont run it. Any help greatly appreciated thanks..

On Sun, Jan 23, 2022 at 09:16 AM, Roberto Taberna wrote: It was so simple! Thank you so much, Max 😊NP Roberto. Glad it helped. 73 Max

It was so simple! Thank you so much, Max 😊 Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>Per conto di Max Inviato: sabato 22 gennaio 2022 20:55 A:

On Sat, Jan 22, 2022 at 05:29 PM, <rtaberna@...> wrote: I've installed SDR Console on a new PC and I don't remember anymore how can I adjust the height of the waterfall panel.Hi Roberto See "Docking",

Hi all I've installed SDR Console on a new PC and I don't remember anymore how can I adjust the height of the waterfall panel. I would like to have on the screen, top to bottom: spectrum, waterfall,

Factoid - color subcarrier was 5 MHz / 88 * 63, exactly. This was suggested as a means of delivering precise time and frequency via TV signals before the GPS era. {^_-}

The NTSC/RS-170 genlock starting frequency was 14.318318 mhz, 4X the subcarrier. 3579545 Hz burst freq. It all goes back to 1953 when the FCC authorized NSTC which became EIA RS-170a. Some of the

and if the user changes to dbuv ... could also the scale in signal history change to dbuV ?? in main spectrum you change the scale ... could you do the same in signal history??

Gosh, does this answer my unanswered question from last April? (maximum power level =) peak signal level? Thanks. Nicki At 04:44 2022-01-21, Simon Brown wrote:

Would it be possible to select a "receiver selection" to signal history or log the levels for each receiver (not just the active one) in a table?? Say you have the receiver