No ... but I want to! George [KB2GSM]

Need to know the switch settings on this SDR please

Good Evening John May I ask if you have any news about your Wellbrook? Thanks in advance 73 Andrea IN3IWZ

On Tue, Jun 7, 2022 at 09:26 PM, Simon Brown wrote: I think it can poll the current frequency; it supports Kenwood CAT. This info is on the link you supplied.OK Simon thanks for that. A good steer. I

I think it can poll the current frequency; it supports Kenwood CAT. This info is on the link you supplied. Simon Brown https://g4eli.com https://sdr-radio.com

I did also ask for a band data out... Easiest would be via usb.. And a user setable truth table Or serial port and an arduino nano ?!? Be it for a hermes and shortwave bands Or for a pluto and vhf

I have recently acquired one of these Arduino band decoders to control band switching on a linear amplifier that I have: https://remoteqth.com/arduino-band-decoder.php I have a Hermes Lite 2 SDR

You Sir, are a legend - thanks so much!

(Edited for clarity) Well, you'd have to get the correct oscillator on the motherboard. There are several But, that sort of would be the correct way to do it. It would not be

Well, you'd have to get the correct oscillator. But, that sort of would be the correct way to do it. It would not be trivial, I suspect. {O.O} On 20220606 00:11:17,

What about adding a gpsdo or ocxo to the pc main board ? (just kidding a bit) Greetz sigi dg9bfc Am 06.06.2022 06:30 schrieb jdow <jdow@...>:

I figure we've beaten this to death. I propose giving the others here a rest. I will comment that I have great respect for Linux, the kernel. The desktops that find their wayward ways

Yes, it's the difference between send (20 Mbps) and receive (200 Mbps) and that asymmetry which introduces an unknown path delay difference which isn't accounted for, and hence the offset I noted. As

On 20220604 22:30:59, David J Taylor via groups.io wrote: I never mentioned that potential to the AF guy. But, then, that was way off in the future when he was only a little way off in the

On 20220604 22:08:59, David J Taylor via groups.io wrote: The delay is not as important as the two way path difference. The delay is automatically canceled out based on the calculated one

In the previous, swap 02 ms for 0.2 ms, and click rate for clock rate! -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@... Twitter:

Certainly tying the PPS into the router would increase performance. Typically here I see up to 02 ms jitter from the internal servers, and under 2 ms from the pool servers (UK). They all show an

That's just what I mean by well-configured. You can adjust things to suit your own local requirements. My chosen server is always one of my own stratum-1 servers. My UK or NL pool servers are

John P Bain. Begin forwarded message: From: John Bain <johnpbain@...> Date: 4 June 2022 at 18:47:56 BST To: dennis.fitch@... Subject: Re: SDR's For Sale, ETC.V2 Hi Hi.  Hi Dennis, I think I paid

On 20220604 06:54:58, David J Taylor via groups.io wrote: Um, just a quibble here, the three pool entries I also use are never chosen as the reference. Of necessity one of them is