And, Simon Brown https://g4eli.com https://sdr-radio.com

Also, Power cycle the S2. I've seen the same with the S3. FWIW I use 64-bits, the native software 32-bits. The logfile may show something... Simon Brown https://g4eli.com https://sdr-radio.com

Hi, Show me the logfile. Simon Brown https://g4eli.com https://sdr-radio.com

Have you tried multiple bands? On my Pluto+ after I upgraded the firmware it went back to the default frequency range and I was getting no audio on VHF - checking a UHF station and it worked - in my

Hi Simon and others, Any additional suggestions to resolve this problem. I love SD Console with the Elad so I am very anxious to get it working again. Can someone check and see if their Elad S2 shows

Resizing is left as an exercise for the student. This us a very standard Windows GUI metaphor. {^_^} On 20220614 03:26:29, jdow wrote:

Three helpful pictures are attached. They show how it works. {^_^} On 20220614 01:26:26, Nicholas Shaxted wrote:

Hello Simon, Thanks for your reply. I used the Airspy HF+ Discovery and set the waterfall gain tp max and set time stamps on. I wanted to make sure things were working for both the max visual gain

Thanks Gisle, but that is what I tried and it doesn’t work here. When I drag the DSP window to where I want it and all the arrowed windows appear it allows me to drop it in the correct place, but

Let's see whether it's streaming data: Set visual gain to the maximum. Enable timestamps in the waterfall. If still nothing then we're not getting data - could be USB port. Anyway, try the above

Just click and drag the windows from the right to the left. Mind you, it's a docking window, so it won't dock were you want until the dark-blue hint-area shows up.

Greetings, I can not get Console to work with my Elad S2. I have never had this problem before. I can get the remote receivers to work and the Airspy Discover+ HF with no problem. As can be seen in

Ok dear wise heads, I installed “SDR-Radio V3.1, 64-bit, 2022-04-12_1245” this morning and when I started it I asked it to remove the DSP panel so that I has only the rx window

Hi, Show me the logfile: Software Defined Radio (sdr-radio.com) Software Defined Radio The logfile is selected from the ribbon bar's Tools pane, it is displayed in the default text file viewer. The

Thanks Don... It was installed in both cases and the LED flash pattern suggests it's there OK -Jim On 6/13/22 18:42, Don Moman VE6JY wrote:

You haven't mentioned installing the driver... Mine shows up as a G31DDC under Radio Receivers in Device Manager.

I've had my unit for some time but haven't used it in a few months. I just tried using it with several W10 boxes with both the supplied program and SDR-Console, both of which worked previously but I

Hello Don, Monday, June 13, 2022 Yes, tried tah and have used it several times in the past, but dfu-util can't even see it. Analog Devices say JTAG is the only fix now, but they do seem sure JTAG

Have you tried DFU mode? https://ez.analog.com/adieducation/university-program/f/q-a/119707/bricked-adalm-pluto Bricked ADALM-PLUTO - Q&A - Virtual Classroom for ADI University Program - EngineerZone

13 June 2022 I have a totally bricked Pluto SDR that dfu-util fails to see. I am looking for someone familiar with this obtuse software from Xilinx to resurrect it via JTAG. I have the adepter board