Sigi, I need your help on how to set up my Pluto, you said '' your lnb setting should be (after tuning xo corection) set that you get the beacon closer to 750 '' What is xo correction ??? 73 Jacques

My Google hit's on 4006.5Hz pointed towards USCG websites... but I think Google read 406z as in 0406UTC? Thanks for the replies! Back to your regularly scheduled programming. 😬 73 Kriss KA1GJU

Hi all Can anyone help me with a minor problem here. I know there are a lot of smart guys on here, probably not the right place to ask on this subject but failed elsewhere I listen FT8 160m most

Chris, The USCG broadcasts weather broadcasts using Mode B SITOR. Is this the service you are asking about? Please see attached pdf. Mike N2MS

The basic problem with the transmit side and really the receive side as well is the math involved requires small fractions of a degree and small fractions of a dB precision in setting

Hello all, Thank you Sigi for the help, The spurious I reported before was due to the fact that I used the XIT (Receive side)  to align my RX and TX frequency . I understand now that it as to be

Hi Kriss, Are you sure that is US Coast Guard Weather RTTY on 4006 kHz USB, the frequency shown in the attached JPG? I’m not aware of USCG using that frequency or frequency shift for WX

Anyone have success decoding WX from USCG on HF RTTY? What settings do you use? i.e. Band Mode (USB or LSB) Reverse Baud Rate Shift of 850Hz Bits Parity 73 Kriss KA1GJU

Hello Simon, I would certainly welcome the ability to calibrate the S-meter on a single tone for each of my transverter set-ups. I use a Perseus, LAN IP and occasionally a

And, Ban plan is there: Ribbon Bar, View, Spectrum, Band Plan. Simon Brown, G4ELI https://www.sdr-radio.com

Rich, here is the link to the Beta version of SRD Cosole: https://www.sdr-radio.com/download#Beta The 3.1 release version you have is the stable 3.1 software. It does not get updated, it is locked.

I came across a you tube video that demo's the SRD Console V3 Beta ... In it has some features I would really like to have.. I have the latest version on SDR Console I have loaded is Version

NEVER NEVER NEVER USE OFFSET ON THE BIRD!!! not with lime and not with the pluto otherwise a spurii may cause trouble on another ones frequency!! offset is ONLY used in local terrestrical contacts

hello jacques i measured the spurious emissions on 13 cm from the pluto ... sdrc is not causing that ... it is an slight iq imbalance (so where it is depends on where you transmit) ... these spurii

Don't forget optional offset tuning. Simon Brown, G4ELI https://www.sdr-radio.com

bonjour jacques at first ... do not use tune tone at that high level (leila is already crying outcause you are way over beacon level!!) second ... your pluto setup is NOT tuned correct (you should

DUO is very probably not seeing the same signal level as the 3000. I do agree that a per-radio signal calibration is needed. Simon Brown, G4ELI https://www.sdr-radio.com

Hi again Thinking about this..I wonder if the duo with sdrc is “ not seeing “ what the 3000 is..ie duo is “ seeing “ the whole rx spectrum and hence not adjusting its signal level when the

Simon Will there be away to “adjust” the relative s meter reading on sdrc ever? I ask as it would be nice to have it adjustable ( say the scale on the side of waterfall/ spectrum) so as to read

Roger, You are correct on both counts. Simon Brown, G4ELI https://www.sdr-radio.com