Hi Mike if you have a 16bit ANAN-10, not 14bit 10E then you can find it here. https://apache-labs.com/community/viewtopic.php?f=32&t=3310 73 Conrad PA5Y

Simon, Thanks. Would you know where I can find the protocol2 firmware? Mike N2MS

I thought the same and so indeed I tried batteries with the same result. Also, I tried a variety of lab grade PSUs, prior to trying batteries. Always the same. At this point I gave up and sold my

Often the clock phase noise is the same whether run on an analog mains power supply or a DC battery. The total noise is inherent in the clock and other circuit design not its necessarily just the

Hi, ANAN 10 already supported, not with PS though. Simon Brown, G4ELI https://www.sdr-radio.com

I've been following the discussion on support for the EP3C25 Transceiver Card. Will SDRC support the ANAN-10? I assume I would have to install protocol2. Mike N2M2

Right on. Not many amateur radio operators or radio enthusiasts are in a position to pay >$10k for a receiver or transceiver. In reality they don't "need" that level of precision even though its

Getting PS working is a major goal for Q2. I actually have a lot of code in place… Simon Brown, G4ELI https://www.sdr-radio.com

No problem Mark. Really! I also got uppity about the IC7300😊 I think that we would both like PS to be available on SDRC, but that is far from trivial and a lot to ask of Simon. 73

Conrad, My apologies for my untoward attitude, you're a good man. This whole discussion has just got me really worked up for some reason so I need to back away from the thread. Best regards, Mark

Wooooaahhh hold on. I most certainly am not a PS hater. Its great! You really have got the wrong end of the stick. The ANAN-7000 is a fine radio and is definitely capable of better performance with PS

Why so hostile? I am not trying to upset you. I made it perfectly clear that I was referring to the transverter port at 0dBm and that I only operate at 50MHz and above. I also said that the K3S PA was

Conrad, And it's not our fault that we're all talking apples (HF) and you're talking oranges (950 MHZ!) lol. It's clear you're a PS hater, you've made that abundantly clear in numerous posts in this

Agreed, But this is off the shelf Ham stuff. Conrad From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>On Behalf Of jdow via groups.io Sent: 25 February 2022 19:26 To:

The instruments own PN with cross correlation at 28 MHz is -170dBc/Hz at 10kHz offset. It is a remarkable instrument and designed for these kinds of measurements. Look

Um, 51dB (the fractions are imaginary) is not all that good even at 1 kW. It's better than what you can buy today, for the most part. But. it's not very good when 60 dB to 70 dB is

Well I did say at 0dBm! Clearly. It is not my fault that you have PS fan boy eyes. Copnrad From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>On Behalf Of oldjackbob via

There is an economics pressure here. Who is going to be the first company to give up being price competitive in a small commodity market and will that company survive the hit to its

Mark, I flashed on one of the favorite 6-meter hacks I communicated with. The other ham worked at a military radio repair facility. They had huge bins of 6AC7 receiving pentodes in

On a hunch - run the radio on batteries. That this could be power supply noise modulating one of the stages or (horrors) the D/A converter's reference. (And I sort of wonder what the