Hi John, - This radio does not need internet, it only needs a computer, a SDR program, such SDR console, and an antenna. - Internally it is a DTV Dongle for V-UHF and a trick to use it

Leif, I just tried this - doesn't help I'm afraid, at least not on my development machine. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Simon, that would be great! If it does not do too much work, could you possibly make a way to switch the Preselector on and off? A big advantage of Perseus is the built-in Preselector (especially for

So, I plugged in my Perseus – no worky! I have to go out this evening, am trying to get the Perseus problem fixed. Simon Brown, G4ELI

Hi John, It certainly doesn't need an internet connection, but be aware that the kit needs some extremely delicate and precise soldering of tiny parts to complete it, and that performance on HF is not

You do not need an internet connection to run this John, just a reasonably powerful PC and a decent antenna (not the wire mini whip supplied, an outside antenna covering the frequencies of

Friends, good afternoon. I am from Brazil and would like to buy this radio by Software RTL-SDR USB Tuner Receiver at this link: https:

OK Chuck, Found the CUDA setting - it is greyed out anyway, says "no CUDA - capable GPU cards, run diagnostics" Which gives this result: CUDA Device Count = 0, cudaGetDeviceCount() status

Chuck, How do I turn off CUDA ?

I believe this is the same problem I reported last week. I fixed it by turning off CUDA support. Didn't get any conformation from Simon about this being a reproducible proble, but you've reproduced

Simon, here is the logfile - hope this helps.... 20:28:59> SDR Data File Analyser version 2.3 build 2760, Copyright (C) 2017 by SDR-Radio.com Limited 20:28:59> Ready 20:28:59> Licence 20:28:59>

Thank you Simon!

Hi David, I have the PL-1 and it works fine. here attached is the xml file you need to upload (replace the existing one if you already have one). The commands are as

Hi Carl, Have a look here: https://www.youtube.com/watch?v=CRMxiePgA3E You might also want to look at

Hi Paul, You are lucky. Other VHF operators have real problems. http://www.qth.net/pipermail/elecraft/2015-November/224340.html http://sm5bsz.com/txmod/vhfc182a.htm There are sites describing what

Leif, With you recent tests and prior knowledge of the perseus close in dynamic range, can you assign an RMDR number for the hf+ ? Carl K0YCR

Hi Mark, Ever been at a field-day? Antenna noise maybe -146 dBm/Hz (28 dB above room temp.) We then would want to place the noise of our receiver at -152 dBm/Hz, 6 dB below the rx internal noise

Larry, I’m a bit busy at the moment but if I find time I’ll have a quick stab at this tomorrow, failing that Wednesday. Simon Brown, G4ELI

all ways search a forum first. https://sdr-radio.groups.io/g/main/message/36971?p=,,,20,0,0,0::Created,,pdw,20,2,0,6263002

Hello Simon, In searching the Perseus group, I find that my problem is not unique. Could you please look into this and help us Perseus users? - while my Perseus works fine with the native