Antenna selection? RF Gain setting? Try a different bandwidth? There’s nothing obviously wrong as there are few options for the CloudIQ. Simon Brown, G4ELI

Hi All, I've been enjoying using my CloudIQ with SDRConsole for quite a while...until last night. Now, when I start it it's as if the antenna is disconnected, no signals. Using the same radio setup

Update I managed to get all working here with the RSP2 taking the IF from the K3. Audio works, tracks fine. I had reset Console and then went through the setup process. HOWEVER My K3 is used as an IF

I hope someone can point me : I have an RSP2 which I have installed on the IF output of my K3. It works fine with SDR Console December update. However, I tried setting the K3 using omnirig etc as my

Simon, Many thanks for your help, much appreciated for the quick responses. 73, John

John, I have fixed the playback issue, kit in a few days. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Simon, Please find attached the DebugView made during the start up of SDR Console V3-992 32 bit system. Strange thing happened that there was now no CRASH !!! V3 -992 works normal now, but it has the

OK, I would like to see the DebugView output please: http://www.sdr-radio.com/Support/Diagnostics#DebugView Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Simon, W10 Version 1709 build 16299.125. Did a fresh install but V3-992 still crashed at start up. 73, John

John, Which version of W10 (use WinVer). Are you using this kit? http://www.sdr-radio.com/Software/Downloads/December15th,2017 Simon Brown, G4ELI

OK noted. John

John, I don’t want crash reports at the moment. I’ll make a kit I can use with crash reports soon. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Hello Simon, I never had problems with either the V2 of V3 version of SDR Console until today (hi). Below the link to the crash report occurred at the start up of V3 on my 32 bit machine / OS:

Hi, That’s working better 😊 . I think I see what’s wrong, stay tuned. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Thanks, Im pretty sure thats all correct. It is just no white noise or waterfall. Im beginning to suspect that somehow my NooElec got compromised, but SDR Console is the only way I have to check it

Sorry Simon, I don't know what went wrong in Dropbox. Can you try this link. https://www.dropbox.com/s/ohw2b3rka3n7bc3/HDSDR_20171216_073308Z_1130kHz_RF%20-%20kopie.wav?dl=0 73, John

Are you sure? Screenshot please. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Hi, I don’t think this is the correct sharing link. Can you try again please? Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Hello Simon, Here is the link to the IQ file (rather large 1,30 gb). https://www.dropbox.com/l/scl/AADJ2MuMOGFYF00f1xmcpa64AkgxtyUlGAU btw my system is 64 bit. I also have a problem on my 32 bit

How can i change the low and high Value of the IF display. They are not the same as in the main status window. Regards Robert