Hi all. Would it be possible to emulate any known USB-tuning knob (to SDR-console) and interface to SDR-Console by using an Arduino? Anyone having a Arduino code for the USB-interface and the

Dear Simon, I just finished making some testing and now have v3.0.5 working fine. For information i just deleted registry HKEY_CURRENT_USER\Software\SDR-RADIO.com (V3) restarted console and never

Wish Phase4 would have Analogue voice for the America's ... I have a .5meter (square area) dish and PA's to try ...

Thanks for the suggestion Klaus. I have been playing with it quite a bit but... maybe I'm missing it, but is there a control for the "Feedback Level"? I also use an external sampler. Without any

Oscar-100 Inauguration Day today so a good time to ask you: I imagine that you will have the transmit and rx synced together as you tune across the satellite band. I also imagine that you will have

I have thought that re-purposing CNC pendants would be a cheep way to add a tuning knob to an SDR. They even come in wireless versions. You could reverse engineer them and add a new overlay. Here

On Wed, Feb 13, 2019 at 10:59 PM, David J Taylor wrote: In some RF environments, you'll need good external RF filtering in front of any of the broadband lower-cost devices. 73, David GM8ARVTrue dat!

Thanks, Mark, That clarifies things. John G4DRS

Thanks, Alan, You are right. I hadn't realised the modern ones were different. John G4DRS

Steve, There are a great number of candidate receivers but if you want top performance you may end up paying top money! If you want transmit as well look at the Pluto, Lime as well as your existing

Hi all, Here’s the work schedule for the next few days. Lime: get full duplex working 100% for Lime USB Lime: get diagnostics for Lime support to help hunt a problem with full duplex on the

did the same here today added a normal lnb in my astra dish ... worked superb yepp pluto and sdrrcv3 is a good combo ... now to get the uplink ready greetz sigi

hmmm ... maybe a funcubedongle?!? that is such a narrowband sdr (but with good performance) dg9bfc sigi ps i still use my fcdpp sometimes even if i have a pluto and a lime ...plus several rtl

Yes, I recommend the SDRplay RSP2Pro. I've used a bunch and this would seem to best fit your requirements. It's the one I use the most with SDRC. I just wished it would go up to 3GHz. I was

Hi Bjarne, Same OS as I have. Yes it's got me stumped, hence my posting here. Clutching at straws I thought they may be some Windows audio setting that is wrong. I use ASIO4All drivers. Regards Mike

Hi Simon, Thanks for answering, gpio is not wat I am looking for. gpio needs that gbio board for the lime sdr. That is ihmo tomuch noney.!! Android is also not wat I am looking for.. in the next in

I very much doubt that Teamviewer is to blame. I used Tv myself for many years before shifting to Splashtop. And I find it hard to believe that Win10 is to blame. I use Win10-64 Pro on all my four

Hi Mike, My Intel NUC will be in my outdoorunit (ODU) behind the dish for Eshail. I can switch it on and off remotely (I built an IP controlled switch box). When switched on IP-Sound and

Hi Mathias, Sounds promising. Do you connect with the controlling computer intermittently or continuously? Which VNC do you use? Regards Mike

ELAD makes the TM-2. http://ecom.eladit.com/epages/990298944.sf/en_GB/?ObjectPath=/Shops/990298944/Products/%22ELAD%20TM-2%22 Harry K1RSA