Hi Simon, I'm pretty sure I didn't edit anything, but I'll be more aware of that next time I have to. Attached are some screenshots. I hope they're what you're after. I tried to send you everything

it was already on my pc...shame.. F5NZZ Jean-Yves MONFORTJN33AD LA GARDE 83 (VAR)============================================== Le 29/04/2019 à 12:04, f5nzz a écrit :

Hi Simon, a few tests here. starting pluto with sdrc --> bursting --> add vmix (no work with it) -->bursting NO. in both the carrier remain active (low level around -70dbm, i

Ken, Also – if you edit a definition you must re-create the entries in the Scheduled Recordings window. I will make this more obvious. Simon Brown, G4ELI www.sdr-radio.com

My Octagon lnb is more like 9749.9 - just find out where your signals appear and correct the LO frequency. - I had the same problem, restarted and everything worked. So restart Console (or the pc,

Hi, I can't retest before Wednsday, but out of my head, I can't tell you exactly which bandwidth settings etc I have in SDRAngle as this isn't clear to me, still don't understand the GUI. With

Yes, 1) Screenshots - shows me exactly what you are doing 2) The correction for the LNB is probably not accurate, try 9750.220 instead. I will update the website. Simon Brown,

Ken, Please post the screenshots again, I want to see this with nothing obscured. Simon Brown, G4ELI www.sdr-radio.com

Make sure you enter the 10GHz frequency for the LNB , if you use the IF frequency the beacon display does not work.

Hi Sigi, Thanks for the first QSO. Your signal was very good with the Pluto ! The “VMIX” fix worked perfectly to cure the TX interruptions. Regards Matthias www.dd1us.de

Hi, does somebody know, whether or not the beacon synchronisation is working with SDRplay/RSP1A  ? I can't get it running but perhaps it works only with Lime- and Pluto-SDRs ? - With SDRconsole

Hi, does somebody know, whether or not the beacon synchronisation is working with SDRplay/RSP1A  ? I can't get it running but perhaps it works only with Lime- and Pluto-SDRs ? - With SDRconsole

Sigi, I am qrv on QO-100 now. Regards Matthias Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>Im Auftrag von Siegfried Jackstien Gesendet: Montag, 29. April 2019 09:28 An:

Well, I need to take of the cars of the family too … LOL Ok, 2 cars done and some work in the garden done Now it is lunch break and the grass is hopefully dry enough to mow it Then

Ah, Will look at that now. Odd… Simon Brown, G4ELI www.sdr-radio.com

hello all, what is vmix??pse? 73 jym F5NZZ Jean-Yves MONFORTJN33AD LA GARDE 83 (VAR)============================================== Le 29/04/2019 à 09:26,

😊 Never gets that cold here, I ‘only’ have one car as well. Simon Brown, G4ELI www.sdr-radio.com

Hi, 3.0.8 (tomorrow at the latest) has a wider span in the beacon window Start with a lower bandwidth (sample rate) as you’re using a lot of CPU, 6MHz is not needed. 750kHz or so will be fine I

Ok Simon Here is a screenshot 3.0.7 (original dll) with Oscar 100. showed rx frequency (and so tx) is not correct because My LNB wants 9749330000 down to show beacon in beacon waterfall (not

Hello Sigi, Ok, let us have Simon look into this issue first. I am busy changing tires of our 3 cars this morning and also need to mow the lawn. In the afternoon I should have time for a