During a big opening in Europe, I can have as many as 1000 decodes to go through after going through a recording of say 3 hours. Automating the lookup can save a large amount

Hi, Enable the AGC for the RTL, that's all I can suggest. You could be overloaded. Simon Brown https://g4eli.com https://sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on

Hi, I'm adding this now. Just working out the most efficient way to do this. Simon Brown https://g4eli.com https://sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of

Simon, Thank you, as always, for your amazing contributions to the hobby. This is an excellent idea and one that I would like to see implemented. Here in the United States, I generally can safely

That little keyboard changes the front end's tuned frequency. Since it is 10 MHz wide and you made a small change the receiver can both remain active and as expected on the same frequency.

"Nothing like" means that if I tune to another frequency e.g. some 1.2MHz higher (A known active frequency), the expected transmissions are not heard. I tune by placing the cursor

Birdies Am 30.07.2022 12:40 schrieb jdow <jdow@...>:

On ribbbon bar transmit.. Engage dsp (means show tx box)... But.. Even if you see it.. You can not work on it (change settings) cause it is greyed out without connecting a pluto. So you can connect

There could be static crashes in there. There could be actual signals from valid or EMI driven sources. These could be IMD responses within the receivers' front ends. At least one is a

Hello all, I am trying to setup the program before I go to my friend that has the Pluto. I am noticing that if the Pluto is not plugged in the PC the TX part is not shown and I cannot set the TX

Yes, Will look at this today. Been out for 3 hours with George, he's crashed out and I must take a nap. Simon Brown https://g4eli.com https://sdr-radio.com From: main@SDR-Radio.groups.io

That's an excellent idea. Or have a column to indicate a flag to indicate a frequency/PI match in the database, or otherwise. It's a quick and easy sort once exported to

horizontal lines are typically lightning or other types of momentary wide band signal. vertical lines are long duration/continuous signals or noise/QRM.

I could add a filter - if the PI Code is not in the database, then I could add a ? or something after the code indicating it's not confirmed. Simon Brown https://g4eli.com https://sdr-radio.com From:

Hi, Screenshots of SDR Console really help, I have no idea what we're looking at in your attachment These could be static crashes Simon Brown https://g4eli.com https://sdr-radio.com From:

Last I knew SDRC Zoom was always around the center of the tuning range rather than any receiver's center frequency. With multiple receivers possible this makes disappointing sense. Of

Hello,Question to the radio operators!Have now set up 2 antennas. So 2x dipole directed on the 15 meter band at a height of 3 m to receive Jupiter (Radio Jove) at 20.1 Mhz. Receiver sdrduo. Software

"Nothing like" needs some expansion. Suppose you were set to 145.123456 MHz. Which digit are you playing with. Are any keyboard keys pressed when you make the change. How are you using the

Hi Simon, I am basically computer illiterate, but for the sake of full disclosure, in case it is significant I should mention that my system is running with 2 displays. One is VGA and the other is

Hi Les, False decodes is one of the downsides of having a very sensitive decoder. I guess it's the price nto be paid. The key here is to have a good frequency database