I looked at that one - it says "multimedia" so I wasn't sure. I found this one and also found out SDRConsole supports mapping keys to the functions - this one has programmable keys. For example, I

Maybe it does help setting the cables to a fixed 48 k sampling speed?!? (just a shoot in the dark) DG9BFC sigi Am 05.07.2022 10:11 schrieb "George Stein - NJ3H via groups.io" <nj3h@...>:

Yes, the maximum cache size is 480MB, I'll increase this to the greater of 480MB and 1/8 installed RAM, so if you have 8GB it'll be 1GB, if you have 16GB it'll be 2GB etc. Simon

Hi Simon, Thanks for looking at this issue. Would you be so kind to annotate on the VAC Control Panel picture which field or fields need updating and what a good value would be? Have a good Tuesday.

Thanks, it's flow control bursting. If possible, put a bigger buffer in the VAC I think. Simon Brown https://g4eli.com https://sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>

On Tue, Jul 5, 2022 at 01:33 AM, Cody wrote: I had everyhtnig working well . Now when I try to run my external radio I get the Omni Rig fault. I using Omni 1.2

Screenshots of the fault condition always helps to diagnose the issue. I don't use an external radio but I do use several external progs that communicate via serial ports. Don't forget that comms

Lame? What seems lame to me is installing one version under another. If all versions were installed in seperate directories on the same level under foo (foo\3.x, foo\3.y, ect.) your problem would

Bat pucky. {o.o} On 20220704 12:27:43, Gisle Vanem wrote:

That is not even effective as all the registry and appdata settings will be shared. {o.o} On 20220704 11:56:14, Simon Brown wrote:

Forgot the DebugView file.

Hi Simon, Thanks for your reply. I have implemented the audio settings you suggested. No improvement. I changed the bandwidth using the Elad S2 from 6.144 MHz to 1.536 MHz. No improvement. Attached

Look at the audio settings, make sure on Default. I' hearing Console pumping the audio and not getting a steady flow through the audio cable. If you enable Diagnostics then extra info may be seen with

I used a paint shop pro format for the VAC control panel picture. in error. attached is a .bmp that everyone can open.

I had everyhtnig working well . Now when I try to run my external radio I get the Omni Rig fault. I using Omni 1.2 . I think it's configured correctly, My radio is set to Com 7 I have the correct

Greetings, Starting a new thread. Last week, Simon and others helped me with audio problems I was having with SDRC. Thank you all! Some problems have been cleared up, but I am having still having

True, but this is crappy freeware. Simon Brown https://g4eli.com https://sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Gisle Vanem via groups.io

On Mon, Jul 4, 2022 at 08:56 PM, Simon Brown wrote: Yes it will, that's the way it's designed. Pretty lame. Other professional installers / uninstaller use a manifest ofwhat's installed. And only

Yes it will, that's the way it's designed. Don't install in that nested tree structure. Give each installation its own root. Simon Brown https://g4eli.com https://sdr-radio.com From:

Depends on the same rate / bandwidth. There may be a maximum cache size which I can increase. Simon Brown https://g4eli.com https://sdr-radio.com From: main@SDR-Radio.groups.io