main@SDR-Radio.groups.io

Re: Continuum mode

Hello Simon, I really appreciate you adding this feature. I do have SpectraVue and an SDR-IP and in the past like Charles I used SDRC with Perseus and the IQ outputs as inputs for SpectraVue. Very

By Conrad, PA5Y · #66098 ·

Re: Continuum mode

Heh heh - processing in the frequency domain makes a lot of this easy. The chief issue is the current FFT resolution compared the bandwidth you want. The "cheap, quick, and dirty"

By jdow · #66097 ·

Re: Continuum mode

Hi. I would like to add two more points to the short spec for the Continuum Mode function: Possibility to set a smaller BW for the measurement than the sampled BW and to set where this BW shall be in

By sm6fhz · #66096 ·

Re: Continuum mode

Not at all. Glad you found the positive saying! The one I came to think about mirrors the Scandinavian "Jantelagen" and misery and gloom. Raising a finger of warning, do not indulge! För mycket

By sm6fhz · #66095 ·

Re: Simon's World Map 1.2.3

Indeed, Possible when I have time. Simon Brown, G4ELI https://www.sdr-radio.com

By Simon Brown · #66094 ·

Re: Simon's World Map 1.2.3

For satellite use, I find Mercator projection helpful ("round" footprints). Perhaps something for the future? David -- SatSignal Software - Quality software for you Web:

By David J Taylor · #66093 ·

Re: Simon's World Map 1.2.3

Good answer Curt. I might have been the only one confused. On Tuesday, March 15, 2022, 04:58:36 PM CDT, Curt Faulk

By Jeff KTØG · #66092 ·

Re: Simon's World Map 1.2.3

I'm American. I only used "anti-clockwise" vs our counterclockwise so as not to confuse our much smarter (than I) friends in the UK. ;-)

By Curt Faulk · #66091 ·

Re: Continuum mode

Yep, kind off: Ju gladare desto bättre. Or more precisely: Ju fler desto bättre. (sorry for butting in)

By swedane · #66090 ·

Re: Simon's World Map 1.2.3

DOH! I always forget that... Simon Brown, G4ELI https://www.sdr-radio.com

By Simon Brown · #66089 ·

Re: Simon's World Map 1.2.3

Jeff KTØG via groups.io <kt0g_jeff@...> wrote: 2 nations divided by a common language. -- Brian Morrison "I am not young enough to know everything"

By Brian Morrison · #66088 ·

Re: Simon's World Map 1.2.3

"Simon Brown" <simon@...> wrote: Thank you Simon. A small thing, on the download page the small blue cloud symbols both link to the October 2021 version, the textual links are correct and

By Brian Morrison · #66087 ·

Re: Simon's World Map 1.2.3

Hi, At the moment it’s a 2 : 1 (rectangular) projection, even when zooming. When I have time I’ll use more screen when zooming. Simon Brown, G4ELI https://www.sdr-radio.com

By Simon Brown · #66086 ·

Re: Simon's World Map 1.2.3

your map/software is very much appreciated Simon......my one question , is how can I make the map fill my screen? On my monitor, the right 2-3 inches of my monitor is empty......the "edge" of the

By Jamie WW3S · #66085 ·

Re: Simon's World Map 1.2.3

Do mean counterclock wise? Anticlock wise ??? Jeff KT0G On Tuesday, March 15, 2022, 10:50:12 AM CDT, Curt Faulk

By Jeff KTØG · #66084 ·

Re: Simon's World Map 1.2.3

A 3 wire I have is 2 for motor, DC, reverse polarity. One for position pot, not sure how that worked. Probably not very well. I made it 2 wires to a resistance meter. 73 Alan G4ZFQ

By Alan G4ZFQ · #66083 ·

Re: Continuum mode

No problem, Ingolf. The more the merrier...(is there aScandinavian version of that saying?) 73 Nick At 08:39 2022-03-15, sm6fhz wrote:

By Nick Hall-Patch · #66082 ·

Re: Simon's World Map 1.2.3

Jim, thanks for the answer. So, 3 wires... clockwise, anticlockwise, and ground?

By Curt Faulk · #66081 ·

Re: Simon's World Map 1.2.3

If it only has three wires, then would think it's for turning only and you wont get any direction indication other than what the control box thinks it is. I had one like that and

By Jim Smith G0OFE · #66080 ·

Re: Simon's World Map 1.2.3

OK... I've been using Simon's World Map for years. It just keeps getting better and better. Now, I'm interested in using the rotator control that is built into it. Using a controller like an ERC

By Curt Faulk · #66079 ·

Messages