thats also what i thought ... as long as he only wants to receive he can use sdrc in client /server mode (one day simon may add also tx with a pluto or lime) wink wink dg9bfc sigi

Why not run the RSPdx in SDRC Server? Looking at the list of servers, there some on public servers: http://onairv3.sdrspace.com/onair-v3.xml Such as DO3BGW’s SDR. 73 Kriss KA1GJU

My main receiver is an Afedri LAN-IQ and I can access it from anywhere in the world using SDR Console. I love it. My "shack" runs a Windows 11 desktop PC and that's where my antennas feed into my

Hi Larry Sorry, I missed your question in 2021 Larry. Busy on the ham bands and many other things to do , so I did not monitor this chat for a very long time. Actually there was no issue at all

Hello Ray, I you have some spare time pse let me know what firmware you use for your USRP X310 to communicate with SDR console. Pse mention also the UHD release, Do you install Winx64_VS2019 or

Hello Eric, did you ever get a reply or a working image for your usrp X310 I had no problem to get an USRP N200 working with SDR-Console, but my USRP x310 was never recognised in SDR console. Tried

Hi Daniel I bought an Andrus a few years back, saidto be from a house clearance, and replaced the short circuit network chip andmuch to my surprise it then worked perfectly. I think I paid about

Daniel, I don’t think so. Simon Brown, G4ELI https://www.sdr-radio.com

Apologies for my ignorance Thanks

if you do not even know how to tune your (reference) frequency (and lnb offset) THEN I HIGHLY RECOMMEND TWO THINGS : let ME take a closer look and RTFM ;-) dg9bfc sigi Am 28.01.2022 um 21:40

Steve, did you get this resolved? If so what was it? -- Dennis KA6FUB

The conversion frequency setting in the device definition is the number you must fine tune. It's possible even if it's a bit awkward. {^_^} On 20220128 12:40:56,

Sigi, I need your help on how to set up my Pluto, you said '' your lnb setting should be (after tuning xo corection) set that you get the beacon closer to 750 '' What is xo correction ??? 73 Jacques

My Google hit's on 4006.5Hz pointed towards USCG websites... but I think Google read 406z as in 0406UTC? Thanks for the replies! Back to your regularly scheduled programming. 😬 73 Kriss KA1GJU

Hi all Can anyone help me with a minor problem here. I know there are a lot of smart guys on here, probably not the right place to ask on this subject but failed elsewhere I listen FT8 160m most

Chris, The USCG broadcasts weather broadcasts using Mode B SITOR. Is this the service you are asking about? Please see attached pdf. Mike N2MS

The basic problem with the transmit side and really the receive side as well is the math involved requires small fractions of a degree and small fractions of a dB precision in setting

Hello all, Thank you Sigi for the help, The spurious I reported before was due to the fact that I used the XIT (Receive side)  to align my RX and TX frequency . I understand now that it as to be

Hi Kriss, Are you sure that is US Coast Guard Weather RTTY on 4006 kHz USB, the frequency shown in the attached JPG? I’m not aware of USCG using that frequency or frequency shift for WX

Anyone have success decoding WX from USCG on HF RTTY? What settings do you use? i.e. Band Mode (USB or LSB) Reverse Baud Rate Shift of 850Hz Bits Parity 73 Kriss KA1GJU