Hi Kriss, Are you sure that is US Coast Guard Weather RTTY on 4006 kHz USB, the frequency shown in the attached JPG? I’m not aware of USCG using that frequency or frequency shift for WX

Anyone have success decoding WX from USCG on HF RTTY? What settings do you use? i.e. Band Mode (USB or LSB) Reverse Baud Rate Shift of 850Hz Bits Parity 73 Kriss KA1GJU

Hello Simon, I would certainly welcome the ability to calibrate the S-meter on a single tone for each of my transverter set-ups. I use a Perseus, LAN IP and occasionally a

And, Ban plan is there: Ribbon Bar, View, Spectrum, Band Plan. Simon Brown, G4ELI https://www.sdr-radio.com

Rich, here is the link to the Beta version of SRD Cosole: https://www.sdr-radio.com/download#Beta The 3.1 release version you have is the stable 3.1 software. It does not get updated, it is locked.

I came across a you tube video that demo's the SRD Console V3 Beta ... In it has some features I would really like to have.. I have the latest version on SDR Console I have loaded is Version

NEVER NEVER NEVER USE OFFSET ON THE BIRD!!! not with lime and not with the pluto otherwise a spurii may cause trouble on another ones frequency!! offset is ONLY used in local terrestrical contacts

hello jacques i measured the spurious emissions on 13 cm from the pluto ... sdrc is not causing that ... it is an slight iq imbalance (so where it is depends on where you transmit) ... these spurii

Don't forget optional offset tuning. Simon Brown, G4ELI https://www.sdr-radio.com

bonjour jacques at first ... do not use tune tone at that high level (leila is already crying outcause you are way over beacon level!!) second ... your pluto setup is NOT tuned correct (you should

DUO is very probably not seeing the same signal level as the 3000. I do agree that a per-radio signal calibration is needed. Simon Brown, G4ELI https://www.sdr-radio.com

Hi again Thinking about this..I wonder if the duo with sdrc is “ not seeing “ what the 3000 is..ie duo is “ seeing “ the whole rx spectrum and hence not adjusting its signal level when the

Simon Will there be away to “adjust” the relative s meter reading on sdrc ever? I ask as it would be nice to have it adjustable ( say the scale on the side of waterfall/ spectrum) so as to read

Roger, You are correct on both counts. Simon Brown, G4ELI https://www.sdr-radio.com

SDR Console does not use the correction tables for signal levels provided by SDRplay for S meter calibration so the readings are way off. SDRuno does use these tables and readings are accurate to

Thank you, Simon. 73 Francesco, IN3XZP

taken transmiting a Tune jacques F6BKI

OK, May I have a screenshot taken while generating the signal shown in the spectrum analyser please. Simon Brown, G4ELI https://www.sdr-radio.com

Hi Simon, Here is the screen shot 73 jacques F6BKI

Hello Jacques, Based on the image, it look as though you are using an external spectrum analyzer to measure an RF emission *FROM* your Pluto. I wouldn't think that SDR Console would be the cause of