|
Re: Resolution
Agreed,
Would be interesting to see the font sizes etc., the defaults should be OK, anything set wrongly can upset programs.
That card may also be an issue, do you have the latest GeForce
Agreed,
Would be interesting to see the font sizes etc., the defaults should be OK, anything set wrongly can upset programs.
That card may also be an issue, do you have the latest GeForce
|
By
Simon Brown
·
#64949
·
|
|
Re: Resolution
I have eye issues and MUST rely on Windows ability to increase the size of fonts etc so I have a chance of reading them without taking off my glasses and shoving my nose up
I have eye issues and MUST rely on Windows ability to increase the size of fonts etc so I have a chance of reading them without taking off my glasses and shoving my nose up
|
By
Gedas
·
#64948
·
|
|
Resolution
I've just treated myself to a cheap 4K display and a cheap Palit GT730 and I'm now getting to grips with tiny writing etc
Opening SDR Console gave me a super full size picture but a few anomalies.
You
I've just treated myself to a cheap 4K display and a cheap Palit GT730 and I'm now getting to grips with tiny writing etc
Opening SDR Console gave me a super full size picture but a few anomalies.
You
|
By
Allan Isaacs
·
#64947
·
|
|
Re: Simon, your server is not accepting users
😊
Simon Brown, G4ELI
https://www.sdr-radio.com
😊
Simon Brown, G4ELI
https://www.sdr-radio.com
|
By
Simon Brown
·
#64946
·
|
|
Re: Coherent dual channel SDR with good dynamic range
Hello Erik.
SDR Uno cannot provide a coherent IQ stream over USB so it will not work. I think that it is most likely that this is not of general interest to the group so I will stop. The BW for
Hello Erik.
SDR Uno cannot provide a coherent IQ stream over USB so it will not work. I think that it is most likely that this is not of general interest to the group so I will stop. The BW for
|
By
Conrad, PA5Y
·
#64945
·
|
|
Re: Coherent dual channel SDR with good dynamic range
Why not any two compatible daughterboards - clocked via 10MHz / 1PPS on x300/x310?
I'm aware the Twin-Rx clocks its two ports together straight out of the box, and that its the x300's only solution
Why not any two compatible daughterboards - clocked via 10MHz / 1PPS on x300/x310?
I'm aware the Twin-Rx clocks its two ports together straight out of the box, and that its the x300's only solution
|
By
Erik. M0MWF
·
#64944
·
|
|
Re: Simon, your server is not accepting users
Found a loose connection on the BNC to SMA adapter connecting SDR #1 to the active multicoupler on Superstation #2. The ground was not making a good connection of all things.🤪
73 Kriss KA1GJU
Found a loose connection on the BNC to SMA adapter connecting SDR #1 to the active multicoupler on Superstation #2. The ground was not making a good connection of all things.🤪
73 Kriss KA1GJU
|
By
Kriss Kliegle KA1GJU
·
#64943
·
|
|
Re: Coherent dual channel SDR with good dynamic range
Hello Peter, no I don’t think so. The RSPDuo would probably just about work for EME but would collapse during a typical EU summer Es opening. They have quite poor RM performance and require a
Hello Peter, no I don’t think so. The RSPDuo would probably just about work for EME but would collapse during a typical EU summer Es opening. They have quite poor RM performance and require a
|
By
Conrad, PA5Y
·
#64942
·
|
|
Re: Coherent dual channel SDR with good dynamic range
Conrad,
There is only one on the market that I know of that is close to what you need. It's the ETTUS X310 with a Twin-RX card ($$$$). Each card can receive 2 coherent channels. The X310 can accept 2
Conrad,
There is only one on the market that I know of that is close to what you need. It's the ETTUS X310 with a Twin-RX card ($$$$). Each card can receive 2 coherent channels. The X310 can accept 2
|
By
ray roberge
·
#64941
·
|
|
Re: Simon, your server is not accepting users
Yes,
Will give this some thought. My OnAir server can send e-mail via my e-mail server (I run my own, hMailServer). Maybe a maximum of one e-mail a day to offenders.
FWIW running your own
Yes,
Will give this some thought. My OnAir server can send e-mail via my e-mail server (I run my own, hMailServer). Maybe a maximum of one e-mail a day to offenders.
FWIW running your own
|
By
Simon Brown
·
#64940
·
|
|
Re: Simon, your server is not accepting users
Maybe a valid email address must be given (email approval via you) to get the upload code? Kinda late now that the cat is already out of the bag!
That may weed out the phantom servers or at least have
Maybe a valid email address must be given (email approval via you) to get the upload code? Kinda late now that the cat is already out of the bag!
That may weed out the phantom servers or at least have
|
By
Kriss Kliegle KA1GJU
·
#64939
·
|
|
Re: Simon, your server is not accepting users
Hi Kriss,
Most likely some type of military OTH radar, but something else to consider might be stock exchange transmissions that are starting to gain a foothold in the HF frequency spectrum.
Hi Kriss,
Most likely some type of military OTH radar, but something else to consider might be stock exchange transmissions that are starting to gain a foothold in the HF frequency spectrum.
|
By
Ken Sejkora
·
#64938
·
|
|
Re: Coherent dual channel SDR with good dynamic range
SDRplay RSPDuo is probably the nearest you'll get that meets your requirements.
Peter
SDRplay RSPDuo is probably the nearest you'll get that meets your requirements.
Peter
|
By
Peter 1956
·
#64937
·
|
|
Re: Simon, your server is not accepting users
Yes,
I must reach out and get people to update their installations.
Simon Brown, G4ELI
https://www.sdr-radio.com
Yes,
I must reach out and get people to update their installations.
Simon Brown, G4ELI
https://www.sdr-radio.com
|
By
Simon Brown
·
#64936
·
|
|
Re: Simon, your server is not accepting users
Your back online!
See my post (rant?) on the other site:
https://forum.sdr-radio.com:4499/viewtopic.php?f=60&t=1518
By the time I found a server that actually was online and had an antenna
Your back online!
See my post (rant?) on the other site:
https://forum.sdr-radio.com:4499/viewtopic.php?f=60&t=1518
By the time I found a server that actually was online and had an antenna
|
By
Kriss Kliegle KA1GJU
·
#64935
·
|
|
Re: Simon, your server is not accepting users
BTW,
Looks like a military data transmission, possibly radar but I suspect data.
Simon Brown, G4ELI
https://www.sdr-radio.com
BTW,
Looks like a military data transmission, possibly radar but I suspect data.
Simon Brown, G4ELI
https://www.sdr-radio.com
|
By
Simon Brown
·
#64934
·
|
|
Re: Simon, your server is not accepting users
Ah,
Thanks – try now.
Simon Brown, G4ELI
https://www.sdr-radio.com
Ah,
Thanks – try now.
Simon Brown, G4ELI
https://www.sdr-radio.com
|
By
Simon Brown
·
#64933
·
|
|
Simon, your server is not accepting users
I'm trying to find a server in the EU area to located the 17M QRM...
Not having any luck.
73 Kriss KA1GJU
I'm trying to find a server in the EU area to located the 17M QRM...
Not having any luck.
73 Kriss KA1GJU
|
By
Kriss Kliegle KA1GJU
·
#64932
·
|
|
Re: Coherent dual channel SDR with good dynamic range
I’m afraid you have no options, if you need such a radio you’ll have to design it yourself.
Simon Brown, G4ELI
https://www.sdr-radio.com
I’m afraid you have no options, if you need such a radio you’ll have to design it yourself.
Simon Brown, G4ELI
https://www.sdr-radio.com
|
By
Simon Brown
·
#64931
·
|
|
Re: From Bob: Requested logFile re Instances Setup Difficulty
Thank you Simon. 73
Gedas, W8BYA EN70JTGallery at http://w8bya.comLight travels faster than sound....This is why some people appear bright until you hear them speak.
On 12/1/2021 1:56 PM,
Thank you Simon. 73
Gedas, W8BYA EN70JTGallery at http://w8bya.comLight travels faster than sound....This is why some people appear bright until you hear them speak.
On 12/1/2021 1:56 PM,
|
By
Gedas
·
#64930
·
|