This looks OK to me although I use the dBm scale for broadcast rather than S units. Ribbon Bar, View, Spectrum, Scale. Also adjust High and Low a bit… Simon Brown,

OK, Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think? Simon Brown, G4ELI https://www.sdr-radio.com

Simon. It does have an IQ output. Here a the blog entry discussing control via SDRUno <">http://mini-whip.de/2021/08/02/malahit-dsp2-control-and-waterfall-from-pc/>

Greetings, Looking at NOAA 18. The large map information agrees with Orbitron, so two programs agreeing is great!. However the popup map, doesn't agree with the main map. The AOS values are

Hi Simon, thanks for your reply (and for the one about satellite height as well) Hopefully the attached picture will help. All the best! Regards, George, NJ3H Redmond, Oregon USA

The Malachit supports a very small subset of the Kenwood TS-480 command set. It supports reading the frequency and mode and setting only the frequency. It's severely limited in its scope. On the

I believe the Malahit supports a subset of the Kenwood CAT protocol through soapy library. Tuesday Oct 26, Malahiteam released their manuals in English for the original DSP1 and the DSP2:

Mike, I would consider it is there’s an IQ interface. Simon Brown, G4ELI https://www.sdr-radio.com

Simon, I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays. You support the Afedri LAN-IQ SDR and have started to

George, Adjust the contrast (RHS), just click [Auto], this will help a lot, then post a screenshot. Adjust the range with the Low and High options which are shown when the mouse is moved over the

Height is just your height ASL. Makes a very, very small difference to the Doppler correction. Simon Brown, G4ELI https://www.sdr-radio.com

On the setup screen for home location for satellite reception, there is a data field called 'Height'. At first blush I would just enter the height above sea level for my location. However, there is

Thanks, Max. That worked fine. I appreciate you help. Regards, George

I have not used the satellite capability. {^_^} On 20211104 16:00:53, George Stein - NJ3H via groups.io wrote:

You are running SDRC at a substantially higher gain, I notice. (10 vs 6.) {^_^} On 20211104 15:38:34, George Stein - NJ3H via groups.io wrote:

Sorry, managed to insert picture in error as well as attach. Click second one (the attachment). It's bigger and more readable. Max

See attached pic. First, press "Select" to left of the buttons you have circled. Then "Browse" and Favourites is a tick box option from which you can add to the push button list. Make sure "Add to

Kindly look at the attached picture. Notice the satellites buttons shown circled in red. Also notice the popup that shows a group called 'Favs'. How do I take my favs group and make them the push

I find I have to run the gain on my R2 at 15 to 17 to get reasonable signal strengths, and clear reception. Here's the FM band on a 2M/440 antenna up 50' on my tower: 73 Kriss KA1GJU

I finally found the setting. Need to clean my glasses more often. Any suggested settings to maximize reception and quality using Console will be appreciated, JoAnne. Have you used the satellite