OK, I’ve been working on some annoying / difficult coding which I’ve just finished, so can think about this. If your PC freezes with a USB device then I suggest the USB device. Were the

Does anyone else find this defect? Simon, Could you verify? I got another LAPTOP, the third PC, which only had win10 and Office and nothing else. I installed zadig + SDRrtl + sdrconsole from new

i will not suicide when my tl922 gets broken (a pair of 3/500z) ... i will repair it ;-) running barefoot?? yes my ft990 with 100w and a good antenna often is enough ... no in all qso i

So you will suicide if your GOB linyar needs repair because the driver acted up and you are stuck with a barefoot HL2? That QRP transmitter made it with decent copy over a 1500 km+ path

live is to short for qrp :-) i have no footswitch and before falling asleep i switch of my gear 6kc ssb?? yes it is possible ... but really not needed and it is waisting bandwidth

Meh, I never used anything other than the pro-II microphone and its widest bandwidth. I felt silly being so narrow but WBFM just doesn't work on 3.5MHz through 4MHz. Well, neither does

Am 02.09.2021 um 00:00 schrieb Conrad, PA5Y: i use 100 to 2.8 on qo100 (2.7 bw) yes ... SLIGHT reverb is what i use here ... a "tiny bit" only just to make the audio a bit

My first draft included a reference to CB radio, but I decided not to make that point because it was sigi who is clearly not a CB op. But as usual, you are right, reverb would put me off too. I

Answers below.

It seems to me that in the amateur radio segment, the most suitable implementation is WSPRnet. The required data is available on the servers of this network. Sometimes I run my local WSPR / FT8 / CW

Yeah I love the way Simon has that history plot displayed ! It is awesome. Imagine being able to see a full 24 hr of a certain station, like WWV etc and watching it's S/N

Seeing individual signals would not be the point. Seeing the changes in noise plus signal charted over months and compared with some of the more prestigious prediction programs would be

Haha...brings back memories of my days as a radio inspector with Department of Communications. That's a big 10-4 Joanne

If anyone is interested in taking a look, these canvases of the spectrum look something like the link below. I know most of the digital and analog signals in person, reading the spectrum that was

My own thoughts on mic processing.. 1) Given the 5k max (and even that only in very rare instances) audio bandwidth that we're constrained to on HF, and given the vast selection of free (and powerful)

This is implemented in the SDRDataFile Analyzer ("Signal History" option). But it seems to me that the width limit of 10,000 pixels will be irrelevant for bands wider than 2-3 MHz. It is very

Agree but it would be so nice to tune to a specific frequency (sometimes up in the HF bands) via console and gather our data w/o additional hardware and/or software. Console

That would be VERY useful Simon. There are a lot of folks who would jump on being able to take that data and then generate some plots. FYI, the history plot (like the

For that you might also like an R888 so you could watch DC to ultra low infra red and see effects over that entire range. That would be fun, actually, worth dedicating something like a

Export the data? If really important I could write SH data to a SQLite database or XML. Simon Brown, G4ELI https://www.sdr-radio.com