Excellent thank you everyone. Having lots of fun with the SDR this afternoon. BTW, just made a 525 km 10 GHz rain-scatter CW contact. Day doesn't get any better :-)

Yes, start a second instance of vac and select the virtual line you already started as the wave in, then select the speakers you use as the wave out. I use this all the time to hear what is

Thanks Barry. Good to know but I will never purchase from him again after I lost a hard drive and my key and he was 100% unwilling to help out. And a snotty attitude

Another option, if you are using VAC, is to use Audio Repeater: https://vac.muzychenko.net/en/repeater.htm Barry WB2ZXJ

Hiya Dale.....awesome thank you. Will try it right out. 73 Gedas, W8BYA EN70JTGallery at http://w8bya.com (under repair)Light travels faster than sound....This is why some people

Sorry. Forgot the attachment.🙁

Hi Gedas. Windows 10 - if you right-click the speaker icon at the bottom and select Sounds, then click the Recording tab you will see the VAC output properties. Double-click to open,

Like Aunt Audre always said......life's a bitch when your stupid ! Thanks Simon, worked like a charm. Have a good weekend. 73 Gedas, W8BYA EN70JTGallery at

Mike, The speech processor is quite good, it’s a compandor followed by a limiter. Let’s see a screenshot of the transmit options while you’re talking, the Spectrum shows the range and

Near any mic should give a goid audio... Equalizer plus processing... Maybe switch on the mic boost... Already cranked up mic audio in windows?? If you look in tx tab where the vox slider is.. While

Hi, The change wasn’t needed, problem was elsewhere. New beta next week I think. Simon Brown, G4ELI https://www.sdr-radio.com

Hi, Switch audio device with the dropdown just below the frequency. You can’t monitor a VAC at the moment, additional audio routing is planned. Simon Brown,

Sorry, another question... I was wondering what sort of processing the processor function on the transmit audio is. It seems to improve the average to peak power ratio but only by a relatively

Where do we this latest change? de Steve N6VL

Using a RSPdx with SDRC V3.1 and Laptop with W/10. All works aok but then I had the bright idea to install VB Audio to get some VAC going so I could run WSJT etc. That went smooth and was able to

But, You must have control of the remote TS-590 in the shack (local), what software are you using for this? Simon Brown, G4ELI https://www.sdr-radio.com

I don't think so... Simon Brown, G4ELI https://www.sdr-radio.com

I run a remote setup with a Kenwood TS-590sg and an RSP1a.  Can the V3 server be run and synchronized with the Kenwood? I can synchronize the V3 client with the kenwood, but want to access the

Frank, I’ll look at this soon, it’s now the weekend! Simon Brown, G4ELI https://www.sdr-radio.com

Hi, If you still have problems make another video, please show the Ribbon Bar, Home pane as this contains the interesting settings. Simon Brown, G4ELI https://www.sdr-radio.com