maybe you need a different ppm correction PLUS setting if frequency a bit different set if 5 kc higher or lower and correct then the ppm value that you are backin sync (try out in

FYI... Your server has been stuck for +20 days and since there is no 'real' name or callsign attached to this server, nobody can inform you of it's status. ☹ Also, the software running the server is

No need to be a separate program. Just do not start a SDR receiver. I do that all the time. /Lars

Hi, I've set up my TS-480 to SDR-Console v3 via HRD/Omnirig, it's all working fine. The radio tracks the software etc. I'm using an RTL v3 dongle and it's working fine too. The problem is, that when I

Or put a piece of 21mm tube in place of the horn gives ~+2dB 73 Alan G4ZFQ

nut 13mm?!? (so 8mm diameter??) what is f/d on that cf dish?? wih a normal lnb you only use half the dish size greetz sigi Am 05.04.2021 um 05:50 schrieb Si_._,_._,_

And, Two NUCs located, I forgot that I did indeed own two NUCs located nr Garner NC, 1 x Celeron, 1 x i5-7260U, both have NVMe memory and SSD. These were part of a project from a few years ago and

Sigi, FWIW here’s the mount, I had forgotten about buying longer bolts, I just checked and there are there! Simon Brown, G4ELI https://www.sdr-radio.com

I will check. Simon Brown, G4ELI https://www.sdr-radio.com

In this final episode of the Large Low Inductance Loop "LIL" we finally get to mount the loop at its remote location in the woods and check out it's performance on the VLF and LF band. Check out the

simon ... what were / are the diameter of the screws (that you should replace with threaded rods and two nuts for finetune distance) the "lnb arms" are rods with screws on your

Circuit and Diode type and model would help me understand how it is working. The picture is not speaking a thousand words unfortunately :-) 73 de k1jbd bammi

will do (add tcxo that is stable besides temp change over the day ... yes beacon lock does the rest ... but its stable enough also if beacon is off (or disturbed "from a pirate") ... you will get lnb

Sigi, Just for polarisations, true you can use splitters, but what if you want to use the other frequency band, perhaps for signal checks? I've found it generally convenient to have an output which

All I need is a more stable LNB, not one that is continually hopping about. A better TXCOI will be fine, the software does the rest. Simon Brown, G4ELI https://www.sdr-radio.com

you just need the two polarisations for additional nb or wb receivers you can split these outputs in two or 4 port splitters reference in?? if i modify lnb for external in its easy to add an sma

However, the extra cost is small, and having the extra feeds allows you to check other signals while retaining operation on the signals you want. Quad allows two polarisations, plus one test feed,

I have the Quad already. Simon Brown, G4ELI https://www.sdr-radio.com

you just need a double not a quad greetz sigi dg9bfc Am 03.04.2021 um 13:36 schrieb Simon Brown:

Turn the LNB through 90 degrees for horizontal