main@SDR-Radio.groups.io

Re: Forum problems.

Hi, I think iIt’s your ISP/Security – the IP address is residential, not a business, I expect this is why it’ll be blocked. Also it may be the port number, you’ll have to talk with your IT

By Simon Brown · #60221 ·

Forum problems.

Hello Simon, I have hardly any spare time and I cannot access the forums from work in my lunch break. You did mention why this might be a month or so ago. Is this likely to be fixed any time soon? I

By Conrad, PA5Y · #60220 ·

spider.ham-radio.ch

Hi, DNS at the moment, will be back soon. Simon Brown, G4ELI https://www.sdr-radio.com -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

By Simon Brown · #60219 ·

Re: CW decoder

NP Andy. I've tried a few and the decoding on CW Decoder is probably the best I have found. Proves not to "judge a book by its cover"! 73 Max

By Max · #60218 ·

Re: antenna splitter ?

Hi every one, What I want to say is it isn't necessary you build every building blocks of your project. Who makes their own resistors, capacitors, semiconductors? Who is capa be to project and

By Francesco Di Giovanni · #60217 ·

Re: antenna splitter ?

Some even like making their own vacuum tubes: <https://www.youtube.com/watch?v=EzyXMEpq4qw> Not shown is the part where he collects sand & ore to make the glass & plates ;) Bob NO6B

By Bob Dengler · #60216 ·

Re: antenna splitter ?

Any passive splitter will have at least a 3 dB loss because half the power is going into each receiver. Some people like active splitters but they can generate unwanted spurious signals. Quality

By Roger Need · #60215 ·

Re: antenna splitter ?

Just a comment on the use of a T connector. A simple T connector is a poor way to parallel two receiver inputs together. Doing it this way can lead to a number of problems including: - The input

By Roger Need · #60214 ·

Re: CW decoder

Max, thanks for the link to CW Decoder. I thought I had tried them all over the years but have never heard of this. I just downloaded and it is quite good, the GUI is no Simon Brown masterpiece but

By Andrew OBrien <k3ukandy@...> · #60213 ·

Re: CW decoder

Hi Jim In the meantime this is an excellent and free CW decoder from WD6CNF, simply called "CW Decoder" ! GUI not very exciting but I found it from an eHam review and find it very accurate indeed.

By Max · #60212 ·

Re: No audio if AGC is OFF #sdrconsolev3

Hi Stephen As Simon says, adjust the Gain in the AGC panel: Best Max

By Max · #60211 ·

Re: No audio if AGC is OFF #sdrconsolev3

There is a few things that interact. Try various combinations to see what the effect is. Dale On 10/8/2020 6:54 AM, Stephen Driscoll wrote:

By Dale Elshoff WB8CJW <dale.elshoff@...> · #60210 ·

Re: No audio if AGC is OFF #sdrconsolev3

Overload in the audio stream. {^_^} On 20201008 03:54:02, Stephen Driscoll wrote:

By jdow · #60209 ·

Re: antenna splitter ?

Some people actually have fun making paper the old way. Don't deny them their fun, Francesco. After all, there are hams who still use the long obsolete Morse Code and actually manage to

By jdow · #60208 ·

Re: No audio if AGC is OFF #sdrconsolev3

Steve, We’re using the forums now. AGC Off, increase the Gain slider. Simon Brown, G4ELI https://www.sdr-radio.com

By Simon Brown · #60207 ·

Re: CW decoder

Yes, I stopped because I didn’t have time, want to get back to this soon and see if AI will help. Simon Brown, G4ELI https://www.sdr-radio.com

By Simon Brown · #60206 ·

No audio if AGC is OFF #sdrconsolev3

Hi, This something I recently became aware of: In SDR Console v3.0.24 I get no audio output unless the AGC is set - no sound at all if the agc is off; although the display shows signals. Am I

By Stephen Driscoll · #60205 ·

Re: antenna splitter ?

It isn't necessary every day to reininvent the wheel. Use your gray matter and don't waste your time to build everything. A creative writer uses his gray matter. He don't loses his time producing his

By Francesco Di Giovanni · #60204 ·

Re: CW decoder

Hi Simon! I was wondering about the CW decoder. Is it still in the works? -- 73, Jim W7EED

By Jim W7EED · #60203 ·

Re: VIDEO PLAYBACK V3.0.25

Any chance I can get a link to an upside-down video? I could possibly make one myself. Simon Brown, G4ELI https://www.sdr-radio.com

By Simon Brown · #60202 ·

Messages