new fishes in the pond https://twitter.com/fei666888 a pluto "clone" (but with better clock and already in metal housing) ... and a pluto plus ... with gigabit network and two rx

Hi what stands in the way of utilizing the full 125 msps for a 0-60 MHz spectrum ? ... as was for the QS1R Paul N8CVW

Simon Thank you for all your work. Larry, K4LED

Larry, Both the RX-666 and RX-888 show the future for wideband SDRs – direct sampling using cheap ADCs. I’ve been shown some very interesting new devices coming from China which should really

Received an RX-888 yesterday. Interestingly it works fine with the RX-666 ExtIO also. The software then reports it as an RX-666 on HDSDR. With the RX-888 ExtIO an additional window allows selecting

when all is bonded the problems are gone ... before i had the metal case i only bridged usb shield to lnb minus (pulls shield to ground level) ... now with the metal case i have the

Early on that would have stopped me from looking towards overloaded USB or Ethernet busses. I'd have probably gone with Sigi's solution instead. Pluto is insanely sensitive to

Thanks, James and Jean. Jean, your explanation makes sense for me. I think, I will have a try with one of the described mods, probably the bridge. I will report ... 73 de Nils DHØHAN

Hi jdow, What picture exactly would you like to see? I have attached a screen copy of SDR Console as first step ... Pictures of my setup can be seen at

Hi - Simon's software is also a geat collection of tools to realize many applications & ideas. The Signals Analyser module with its time resolution of down to 1ms offers e.g. the possibility to

Hi Nils, Your logfile does not show obvious hints apart from the "not ready" message. From what I've seen so far, I would also suggest to do the "ground mod", eihter by replacing R88 as suugested by

With the the "stock" Pluto - ethernet operation was very unsatisfactory (both on Windows and Linux) requiring lots of Pluto power on-off-on cyclies before I could find it on the network. As Analog

If from the forum then please ignore. Simon Brown, G4ELI https://www.sdr-radio.com

No picture no further discussion. {^_^} On 20200823 13:02:18, Nils DHØHAN wrote:

Currently 77 emails from the forum awaiting moderator approval. Just ignore or let them through ? / Andy K3UK

PS for jdow: I worked with full duplex. No data on load of USB bus.

Hi all, thanks for your comments. jdow: I am using lowest selectable bandwidth 550 KHz. I attach a complete log file (with parameters), see remarks further down. Maybe I can improve the settings with

Hi Am using Adalm Pluto. Works perfectly in narrow band modes. However, I cannot see any signals in the wide band sections. Polarisation change (18 V)seems to work fine. I do not want to decode, just

Hi Nils, As LAN mode is realized by a USB-to-LAN adapter, LAN mode is affected as well. AD discusses the problem that is assumed to be fixed by the "ground mod" on their wiki-page in section Why do a

Here is the card of my RX-666 Notice the IC: U7 has not been implanted I could see from a photo that it would be a 24M02RD (K546K) Detail photo of U7 Unable to obtain an electronic diagram of the