Hi Simon, Problem is solved, it was actually due to an incorrectly configured RX / TX converter. Thank you very much for that incredible Software! -- 73 de www.dl6wab.de

I think some of the answer depends on what frequencies you want to listen to? Not sure about RSPdx, but I consider my RSP2 adequate at best on LF/MF/HF due to lots of overload issues. Not sure if the

Interesse halber: Mit USB Isolator funktioniert alles prima. Aber vorsicht, nicht jeder Isolator funktioniert. Windows sieht dann den Pluto nicht, oder nur manchmal. Habe schliesslich einen mit USB2

I ended up building a W1VLF, AM BC filter for KA1GJU Super Station #2, since that server is the only one with an SDRPlay RXR. All others got destroyed in the lightning hit of 2019. Here's a link to

I have a RSP2. Initially, I had terrible problems with overloading from our local broadcast station on 800 Khz. I built a wave trap with a 365 pF variable and a ferrite toroid, which worked great to

Kriss. I think a fair point (pun intended!😊) would be to say that the performance on AM BCB might depend on where you live and the type of antennas you use. I don’t have any powerful TXs close

Kriss, Not an uncommon "feature" of wideband SDRs. http://ka7oei.blogspot.com/2018/06/a-limited-attenuation-high-pass-filter.html has some useful designs to level out signals over 0-30MHz. 73 Alan

George, If you mean the RSPdx, none that I have noticed. It performs really well, as I expected, on MW and SW but due to lack of proper antennas, I can’t claim the same above 30MHz. I have heard

It 'plays' very well with SDRC (pun intended)! As to it's tendency to overload from nearby AM BC stations creating images across the spectrum, I'll let the others comment on that... 🤐 73 Kriss

Do you mean the RSPDX or the RSP1? There isn't a RSP1DX. -- Martin m3ghe

Greetings, How well does the subject receiver work with SDRC? Are there any major issues or concerns? Thanks for any comments. Regards, George, NJ3H

Hi, https://www.sdr-radio.com/screenshot Simon Brown, G4ELI https://www.sdr-radio.com

Dear OMs and YLs, since yesterday i have a big problem with the SDR Console 3.0.24 and the Adalm Pluto. Probably after a Windows update (new Edge Browser), the TX frequency can no longer be

Dear OMs and YLs, since yesterday i have had a problem with pluto transmission. The transmission frequency can no longer be synchronized with the reception frequency and always remains at 10489750000

Hi, Just a warning – the on-air server list will be down for the rest of today, maybe tomorrow. Obviously remote server access will still work, just can’t browse the list of available

Hi, Just bear in mind, this box can eat bandwidth on your local LAN.Make sure you are using decent branded ethernet switches. Most Home switches don't do very well when you start chucking huge

On Tue, Aug 4, 2020 at 11:04 PM, Simon Brown wrote: I will make this fully user-configurable. Fantastic Simon.Always a great software! 73 Franco

I add this paragraph to a current thread that was discussing this feature, but did not get any response. I am sorry if that was not the correct way to get this feature aired.... : This Thread most

Two ways to sync sdr and rig... One way is. Select external radio and connect ftdx3k there... Other way is... Connect ftdx3k to omnirig on one port... And sdr console as ts2000 as second rig to

I also struggled for a long time with a distorted microphone audio. In the end I found a solution that always works well for me (the names are based on the Dutch Windows 10 version): Go to the