+ video https://www.youtube.com/watch?v=EPJyTHnm7y0&feature=youtu.be

I like to use the SDR-Console with an Airspy HF+ Discovery as a spotting-receiver for my IC-7300, but I would like the IC-7300 to track only when required, i.e. when I have found a frequency to which

Just a quick observation if you use the XIT and add a offset (of any Hz value) the XIT button does not toggle it off - it reamains active whteher the button is on or off. The only way to turn it off

Just out of curiosity, can you enable PTT of the 7300 if using any of the digital modes within DM780 ? Andy K3UK

Hi Dennis, That was it! Thanks for your help and 73.

24 kHz if you ignore decimation anti-aliasing filters. 22 kHs is with the anti-aliasing filters. {^_^}

Hello everyone, I have a new Icom IC-7300 with the installed PTRX-7300 module to output via a SDR Play RSP1A to a larger monitor for panadapter use. My problem is that when using sdr-radio v3 along

Hi Jim Thanks for reply. Yes, I too had the MM preamp..... on a boot-mount Pye Cambridge for 2m FM...... my first ever multi-channel VHF rig for the car (6 channels via ledex/uniselector). Very

Hi Sigi Yes, actually I am now thinking of doing exactly this. Transverter for 6m and Pluto for everything else as you suggest. I just referred back to all the notes you kindly sent previously about

Bought a new Lime Mini. The sound is constantly lost for a tenth of a second. The wider the reception band , the more often it disappears. But it disappears even at the 5 MHz band. And on 20 MHz very

Many thanks Oguzhan. Useful information. Best Max

Used one of that ukrainian transverter for 2m for a while. It is not a highend device for sure.. But I connected that to my ts-480, had an output of 10-12W which was enough for repeater

Yes, Tom. Think in radio particularly it's hard not to hark back to earlier days with fondness..... but also need to embrace the exciting new developments that we could only have dreamed of back then!

Max “…2m and 70cms I have a little nostalgia for because used to go out portable for VHF NFD with my local club. High locations and 4CX250B linears….” Now that wipes away the COVID 19

in my view the pluto beats the hack rf ... dg9bfc sigi =============================== Seconded. 12-bit IIRC, not 8-bit. David -- SatSignal Software - Quality software for you Web:

Max, No, I've not got a SDR-radio setup at the moment but as i described I thought the Softrock IF mode was capable of 48KHz span. The pictures on Simon's page are not clear enough for me to see the

in my view the pluto beats the hack rf ... dg9bfc sigi Am 30.05.2020 um 22:19 schrieb David L. Wilson via groups.io:

Hi Paul Just want to get active on those bands in a casual way, nothing cutting edge, but I don't like operating compromised kit. So for example since I have had my HL2 I don't use my RSP2Pro on HF at

Sorry Alan.... did not check the author on that item! Thanks for your comments. Yes, of course. I see now (the IQ theory) but not why there is a 24 kHz restriction. For me personally it's not a

Max Says "A simple way of using CW Skimmer with a Softrock would be to use it stand-alone in this way 192KHz can be seen with a suitable soundcard. " But by the design of Skimmer "*/when in