Nyquist issues can be taken care if by setting the screen (waterfall/spectrum/zoom) bandwidth to about 80% if the sample rate (hardware) bandwidth. Max suggested using the lowest sample rate

again a try pa0ono at amsat dot org

pa0ono@...

Hi All, Begin 2019 I used the limesdr usb with succes with wsjt and band hopping. Great tranceiver hi. If somebody wants the SDRSourceLime.dll file from the old 3.0.5 version pse send an email to

Latest SDR-Console that had TX for the LimeSDR-USB. Ed

I would love to use SDR Console with my Airspy R2 and Spyverter running on Spyserver. When I add it, it detects it. I set up the upconverter, but when I try to use the radio I get "radio not found

On no, Thank you for your information. I think that the other day Simon was asking exactly for this kind of information, if I remember well what he wrote. I do not store old versions of

Ok ... is that the lime driver or last version of sdrConsole that had Tx ... ?

https://drive.google.com/open?id=1ZlmPlcXe5BtQgp214y4ZwV5sO9IJyk-- 2-8-19 last working LimeSDR-USB TX Ed

https://drive.google.com/open?id=1ZlmPlcXe5BtQgp214y4ZwV5sO9IJyk-- Found it through the Way Back Machine. Might have to go back to an older firmware from that era. Not sure how to do that, but I'll

Sorry to report you are in territory that I do not understand so maybe Simon will see this and be able to suggest what might be going on. Yes, full uninstall/reinstall may do it. It is an odd one

Once again SDR Console abilities amazes me. Digging through a few Google searches and trial and error I found that the latest version of SDR Console will work with my Airspy spyserver locally and

Thanks. Going into Registry Editor and deleting the keys HKEY_CURRENT_USER\Software\SDR-RADIO.com (V3)\Console\Ident0 and Ident0_001 fixed it. Frank

Hi Max, Thanks for the info. I did try that. Funny thing... when it restarts, it starts correctly, i.e. the DSP Console is there and in the right place. But, the next time I start SDR, it starts

I'm wondering how to get into the archive for 3.0.5 ...

Hi I do have a Limesdr usb modified on LNAL input (removed one coil as approved by lime) until version 3.0.6 it works perfect from 100 khz and up . From version 3.0.6 tx is not working ok below 30

https://www.sdr-radio.com/reset Best Max

Is there a quick way to reset SDR Console (3.0.17 in my case) to defaults? I'm having two issues. First, while monitoring 20m and outputting to VAC, I tried to open a playback session of an IQ

Sorry Neil. It wasn't intended to be polite to you but to him... at an expense. I just couldn't resist.

I have started using a K3s with Airspy HF+ Discovery- I use the IF out from the K3s directly to the Air Spy. Everything is working 100% apart from the following, when I tune the VFO on the K3s - on