20200417. I just published the English version of my video presentation about my short wave Cobra antenna. 73's, Nico pa0nhc.

Hi Max, Problem solved ! The realtek play-back device was set to 192 kHz ; changed to 48 Hz and bingo ! Thanks.

Hi Patrick Reason I mentioned this was because I had a specific issue, exactly the same as yours, that was affected by changing the "default" playback device in Windows Audio Devices, nothig to do

Hi Max, Many thanks for the advice and tip. As I use a virtual cable (VB Cable) I already checked every possibility, ticking / unticking, selecting different inputs / outputs combinations, no way

Given enough computer power in the right places you could run 5 copies with different identities so that their settings are distinct. You would, of course, need five front ends and enough input output

Is it possible to run 2 copies of SDRconsole on the one pc. I have a pc that I think could handle it as I would like to run SDRconsole looking at HF bands + one looking at VHF bands. UI know there are

I just connected to the same server, (mine LOL) and the timer disappears upon stopping. Although I only operate one RXR at a time, not six. LOL No audio though on the movie BTW. 73 Kriss KA1GJU So now

Well, as I keep repeating....I did post on HDSDR site. But I won't waste any of your precious time here. So sorry for bothering you "fine" folks..........I'm done here....and won't darken your door

I have avoided using the Ctrl key or combinations when making keyboard shortcuts because the Frequency entry box pops up and interferes. A single-press of the Ctrl key will activate the

Well I will try once again. TIM...YOU ARE ON THE WRONG REFLECTOR FOR YOUR QUESTION. This is the SDR Console reflector. You need to find the HDSDR reflector for a resolution your issue.

Not here, Tim. Seriously, not here. This is not SDRPlay support. It is not HDSDR support. This is not SDR Sharp support. This is not HPSDR support. They all have their own places for support. Posting

If you are not using SDR Console you will not get help here, most likely. Simon is not support for anything other than SDR Console and SDR Server, his own software. If you are using a different SDR

As I said, I posted there, as well as FTDX 101D site. Hoping between the three, someone might have an answer. Just covering all my bases. It could be an RSPlay issue (not likely), an Omnirig issue

Tim you are on the SDR Console email reflector site. If you have a HDSDR issue you need to find that email reflector group. W1HHO All the Best.From the woods of Maine. On 4/16/2020

It's as if we're talking apples and oranges here. I'm using SDRPlay RSP1A from the IF 9 Mhz output of a Yaesu FTDX 101D as the input for HDSDR as a Panadapter/Bandscope to show the output of the FTDX

Because I use SDRPlay RSP1A with HDSDR as the application that shows the signals. I posted the same thing on the HDSDR board and on the FTDX 101D board. -- 73, K4TK/Tim Titus, AL

If you are using HDSDR why are you HERE? {O.O}

Right where I said it was in the usually understood short form. Let's break it down: "Select radio->Definitions" and the "Invert Spectrum" Go to the "Select radio" icon in the title bar or to the

Hi Patrick I only mention this because I had same issue couple of versions ago (not now by the way as Simon solved it) but just for interest you might try this: Win + R (to get to Windows "Run"

Not a big problem just an annoyance. If I connect to a remote server all is fine. But after I disconnect the connection time continues to run. I have confirmed, via netstat, that the connection did