I read https://wiki.analog.com/university/tools/pluto/hacking/power_amp It describes how to setup one of the four GPO-Pins to automaticly switch while e.g. transmitting (purpose: enable external

I tried the video recorder feature, but the resulting videos don't have any sound. Is this a bug, or a setting I missed somewhere? I tried setting the audio in the video recorder options to AAC and

Just write down your last will.... Dg9bfc sigi Am 30.03.2020 18:07 schrieb Jim Smith G0OFE <sdr-radio@...>:

That is very odd Dan. Mine has always started with last frequency tuned, with three different hardware receivers....... Not sure why this is behaving like this for you. Will try a few tests later

I use a friend's airspy server via the internet. When I start SDRconsole and try to connect to this airspy server, no connection is established. Never. But: if I start SDR# and access this airspy

Moin, I'm using an airspy server that is 75kHz to high at 10 GHz. But when I start Home | Calibration and click "-10" or "+10" (ppm, once or several times) nothing is changing. Not in the displayed

Hi, I am Nino IZ8WLZ, I would like to use the beacon function to stabilize the reception on the 10GHz RTX system. I use an LNB for the 10.368MHz band in reception. If I send a fixed signal for example

Hello- When SDrConsole starts up, it always tunes to 1.125 MHz. Can it be set up so it starts with last frequency tuned? thanks DAN KC2STA

Thank you Jose. I will do that. Have not changed bias current from factory setting yet, but I will check it. I do that in Quisk I think? Not sure.... I must read the wiki/forum for HL2. Yes, I tried

Also agree. We probably all have moments of black humour in the current circumstances, but one man's joke is another's bad tatse bordering on offensive.. and we don't know who on

Max, Yes there is a wat. Use the two tone generator built in Console and turn Drive only up to the points when you only see tour two tones in the middle of the 300 to 3000KHz SSB channel, and another

Agreed! Mike

Sorry folks, but I'm with Dewey. Over on the TS-590 groups site we had members posting the latest Covid-19 Memes to which they thought would brighten somebody's day. Here was my post: Kriss Kliegle

Simon Brown, G4ELI https://www.sdr-radio.com

Up yours with a pitchfork. {+_+}

Bad taste! While I do see the sincere attempt at humor in these horrible times, there could very likely be members here suffering with COVID-19, or have very close loved ones who are. This is just a

The WorthyValued Friends is one hurdle Tom. First send somesamples of the sort of valuable things you would like to receive. Address onrequest Allan G3PIY From:main@SDR-Radio.groups.io

Friends, Please take very special care during this period. If you die, your partner might sell all your gear for what they think you paid for it. Even worse, your kids will just send it to

Just an FYI... The Elad S2 attenuator is actually 12db, not 20 as it inidcates in SDRC. It is the S1 that had the 20db attenuator. This issue has been mentioned before but it doesn't get

Arduinos are nice :) I've done something like that on my own using an Arduino Micro. It's perfectly emulating a Midi Device when connected via USB. Sorry as i don't have a schematic of