Hi, My house is in the centre with a [ ] around it. Nice HF take-off… Simon Brown, G4ELI https://www.sdr-radio.com

Joanne...... Multiple outputs from one receiver. This would then remove the need for separate external techniques to monitor the output of the VAC etc, because one output could go to speaker, one to

Thanks for reading ma question and proposing diffent solutions. I use only one receiver on qo100 - (plus the default one for the beacon) Seems the easiest way ist to try the "listen to ..device"

a subsequent messages made it clearer. Windows does not really make this possible in a clean manner. Contemplate what slightly different audio sample rates might mean for two different outputs on one

Full size screen shot picture? {^_^}

I am not sure what you mean here Max. You can already select separate audio outputs for each receiver, if you have enough audio output devices to which it can be routed. Those are what you setup with

I don't remember you ever citing what aspect of the radio looks or sounds slow to you. I do not even know if you are tuning an RX or the front end. There are many things that may make the receiver be

Hi Sigi Yes, I mentioned that in my earlier reply, but Audio Repeater (also see earlier post) performs exactly the same function but in a much easier way without needing to get into the messy Windows

do you have signal history "docked" somewhere?!? dg9bfc sigi Am 23.03.2020 um 14:23 schrieb myosotis123 via Groups.Io:

no tzhere is no way in sdr console to have two outputs .. BUT in windows you can set in the recording setup to "listen to this device" ... means you can switch to virtual cable but still have the

Of course if you have two (or more) VACs each individual "virtual" receiver can have it's own destination. Many people here run like that with one cable to FT8 on one band, another to WSJT, another to

Hi, It is possible to right click on the Signal Pane which will bring up a menu, the first two items are "Floating" & "Docking" if the latter is ticked the Signal Pane will appear over the waterfall

Help please. I started using SDR Console to record signal history about a week ago, on the 20th March I could use the Screenshot function to record the Signal History pane at the bottom of the screen,

Hi Charly I have requested multiple switchable audio outputs from Simon and he has it on his list. In the meantime see this very useful prog (recommended by someone on here earlier...... apologies, no

tested with latest release 3.0.21, unfortunately the annoying behaviour during radio vfo rotation is still there on the spectrum. the update looks slow and not fluid at all. I don't understand the

Hello, May be I have not found an already existing option to route audio in SDR console to an external prg (other than CW skimmer) via a virtual audio cable. Tried to activate VB-cable (in Skimmer

See: https://acars-vdl2.groups.io/g/main/message/1927 Cheers, Dick

Thank you very much for your rapid help ! May I ask another question ? I intend to receive VDL2 data via Multipsk and SDR console. I suppose this is feasible and is already done by some members of

Like I said, I got it fixed. Switched from USB2 to USB3.

May I suggest you place your call sign in the name some where. That way somebody can look you up on QRZ and advise you that the server is locked up, stuck, or offline. Use the following link (bookmark