On 1/18/2020 11:26:45, rmrrgs wrote: Hi Bob, In SDR Console. it's Program Options > Controllers > Port Selection. See attached PortSelection.PNG It the far left of the

HI to keep CAT sync_ed between my TRX and the SDR_IQ I have to use the OFFSET, all is fine till when I change the band. The 160-80-40-20-15-10 every one needs a different OFFset. A set of memories

Full size pictures please? {^_-}

Añadir posibilidad de manejo con los dispositivos SHUTTLE

As a Power User I like to quickly access the main functions by using Hotkeys instead just per Mouse for ease of usage and implementing in macros. As an side effect it would be possible to use an

Hello, Wish to check my com port setup which is now communicating with CSVUserlistBrowser. a. Where is the menu to show this ? Just can't seem to find. b. Where is the button to enable "Tracking"

Tried version 3825, but after exit en start again, all was present again Not the result we expected. Strangest is that at first I see a few letters, also when I choose external Radio to be displayed

Thanks for looking into this. So what to do to get the SDR stick AO100 receiver working on the server ? As I said, local all OK. But not on the server. If LAN BW to small divide by zero error,

Looking for the ability to remove white noise from HF USB aeronautical frequencies and record to file once voice is active. I'd be looking to record more than one frequency, using multiple

Yes, I would love this. CL

"Placeable" and adjustable as per HDSDR. I've used a lot of SDR software, and IMHO, their user implementation cannot be improved upon. Thanks for all you do!

sometimes i see similar splatter on qo100 (if display works superb for that) a pluto with a good amp behind ... has no splatter up or down (rectangular signal so to speak) an

Hi Simon, I was sort of under the impression you were working on this, my interest is in EME reception to combat Faraday rotation and possible noise cancellation 73 Dave

Dear Simon, regarding the Analyser please consider to add some "minor" improvements 1. Extend the the tune step ammount up to 950 kHz with the same values as in Width 2. Implement a switch to see the

Subject: #Future add a Scanner function (for a scanning between several programmed frequencies)

The E-R N210 + UBX40 has an internal frequency reference and correction loop that results in frequency jumping of several 100 Hz at vhf - 6 GHz. When I use a Linux transceiver program that enables the

Show bands on spectrum display. This could also be editable so users can add local country-specific bands.

An ability to display markers of Frequency Database directly. These markers should use the same filters as Frequency Database itself, to prevent mess on the spectrum display.

Filter by current UTC time and date, or maybe make this feature independent from filters so they can be used for something else.

Hello. Here is the video with audio. Regards -- Maurizio - I 0570/RM/SWL